Blow-off nozzles

Orifice diameter: 1, 0.25 in
Flow: 57, 22, 4.5 ft³/min

Model 1008SS Back Blow Air Nozzle EXAIR's Back Blow Air Nozzles are engineered to clean inside of pipe, tube, hose or channel. An array of holes provide a forceful 360 degree air flow to clear out coolant, chips or debris created from ...

Orifice diameter: 0.13 in

Model 9206 Stay Set Hose Air nozzles that produce focused blowoff force from 2 ounces (56.7 grams) up to 22 ounces (624 grams). Ideal for removing dust, debris, and water from small areas. Compact design fits easily in tight ...

Orifice diameter: 0.75, 1, 0.38, 0.5 in
Pressure: 5.5 bar
Media temperature: 121 °C

Model 1104SS Stainless Steel Super Air Nozzle EXAIR's Large Super Air Nozzles are available from 3/8 NPT to 1-1/4 NPT in zinc/aluminum alloy. Type 316 stainless steel versions are also available through 1 NPT and PEEK plastic nozzles ...

Pressure: 2, 3, 4, 5, 6 bar
Media temperature: 95 °C

UEA D020 compressed air blowing nozzles produce a powerful air jet concentrated on a well-defined impact point. They are specially designed for deep and blind hole drying, produce lower noise and reduce pressure loss.

Pressure: 1 bar - 5 bar

UEA series compressed air blowers are the best choice for operating environments requiring strong-impact laminar sprays. The compressed air flow is blown through 16 orifices, producing a strong impact jet with a limited noise level ...

Pressure: 7 bar
Media temperature: 0 °C - 55 °C

The high voltage at both emitter points of the HE air nozzle is current limited. Being installed outside the air flow, the high-voltage points are hardly subject to fouling, if at all. The single point nozzle blowoff force is high at ...

The Flat ionizing air nozzle is used to clean and neutralize electrostatically charged surfaces. The use of compressed air allows awkward places to be neutralized and cleaned as well. Connected to a Simco power unit, the ionizing air ...

Orifice diameter: 0.8, 1.2, 1.5, 1.8 mm
Flow: 95 l/min - 375 l/min
Pressure: 4, 6, 8 bar

"Hurricane" is a dynamic rotating blast nozzle that cleans surfaces quickly and effectively thanks to the shockwave generated by the sweep of compressed air at a frequency of 9 Hz. The angle of the 2 jets can be adjusted independently ...

The ultrasounic technology produces an acoustic wind phenomenon in front of the probe without gas displacement: the focusing of the acoustic waves produced by the probe creates a pressure field at a few centimeters distance. This pressure ...

Orifice diameter: 0.8, 1, 2 mm

New TAIFUJet® series, Air booster nozzles, Compact, Shorter body (35mm long) compared to the conventional TAIFUJet 42mm wide type with the same performance. Features - This compact air nozzle (42 mm wide, 35 mm long) is suitable ...

Orifice diameter: 2, 1, 0.8 mm

Air booster nozzles, TAIFUJet® series (42 mm-wide, Flat type) TF-F42 Material • PPS or Stainless steel 316L equivalent Weight • PPS: 30g, S316L: 144g Max. Air Pressure • PPS: 0.7MPa (100psi), S316L: 1.0MPa (140psi) Features • ...

Orifice diameter: 0.8, 1, 1.2 mm
Flow: 280 l/min - 630 l/min
Pressure: 0.7, 1 MPa

Features • This compact air nozzle (42 mm wide, 35 mm long) is suitable for applications where flat blowing is required in tight spaces. • The orifices come in different diameters; 0.8*, 1.0, or 1.2* mm (*only metal). • Low-noise level. • ...

Orifice diameter: 0.25 in - 0.375 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 1, 0.2 bar

The DD 106 discharge nozzles in the neXt® product family are designed to fit existing ball heads of 1/4" Ariana articulated hoses. This means that you may, for instance, extend your existing articulated hose system by adding deionising ...

Orifice diameter: 0.25 in
Flow: 2.3 m³/h - 5.7 m³/h
Pressure: 0.5 bar - 2.5 bar

The DD 206 and DD 206 (A) discharging nozzles are flow-optimised. A greater electrostatic discharge reach and cleaning effect on the material to be discharged may be achieved with the additional support of compressed air. Air connection ...

Flow: 3.7 m³/h - 9.45 m³/h
Pressure: 0.2 bar - 2.5 bar
Media temperature: 5 °C - 80 °C

Discharging Nozzles, Antistatic, The DD 306 and DD 306 A discharging nozzles in the neXt® product family are flow-optimised. Due to their short design, they are, among others, used in areas requiring air-supported discharge and also ...

Compressed air or steam is directed in a wide and thin air stream. Large slotted orfice is specially designed. CONSTRUCTIONS AND MATERIALS: Is available Brass as well as Stainless Steel. ( Highly recommended for steam applications) The ...

SPRAY CHARACTERISTICS Wide flat spray of liquid with even distribution except for the edges which have heavier deposit. Wide spray angles, on water, for low pressure. Useful with steam or air for blow-off application. CONSTRUCTION ...

Delavon Spray Nozzle delivers a wide flat spray of liquid for blow-off applications with steam or air. This can also spray water in a wide angle at low pressure The device contains a 3 piece construction set. It has a body that can ...

Orifice diameter: 4, 8, 15 mm

The internationally patented Variacor® system enables you to assemble spraying systems quickly and easily as well as adjusting nozzle positions efficiently. Economy: You don't waste time calling a piping specialist or boiler-maker. Ease ...

Orifice diameter: 5 mm

Orifice diameter: 7.5 mm