Brass clamps for copper lightning protection down conductors.
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 11 bar
... coupling even in the presence of pipes with diagonal cuts Made with virgin material Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 16 mm
Operating pressure: 1 bar - 16 bar
Push-in fittings are so defined as they allow to connect the tube to the fitting in a “instantaneous” way without using tools. The tightness of the tube takes place through an elastic clamp which holds ...
Airwork Pneumatic Equipment
Diameter: 4 mm - 15 mm
Operating pressure: 1 bar - 20 bar
Touch fittings are mainly used during “plastic” tubes assembly for pneumatic installation especially in case of vibrations or extreme climatic conditions (that involve changes on tube features by passing time). The fitting ...
Airwork Pneumatic Equipment
Diameter: 10, 15 mm
Operating pressure: 5, 10 bar
... push-fit fitting for the connection of plastic or copper pipes to fixtures or appliances with a MBSP connection point (horizontal pipe runs). The tap connector comes complete with brass swivel nut and ...
JOHN GUEST
Diameter: 10 mm - 32 mm
Operating pressure: 10 bar
HALF EXPRESS COUPLING, MALE BSPP THREADED - STAINLESS STEEL 316 - BRASS Inox 316 - Laiton
Diameter: 4 mm - 16 mm
Operating pressure: -0.99 bar - 20 bar
STRAIGHT MALE ADAPTOR “UNIVERSAL SHORT” For over 40 years Aignep has developed and manufactured fittings for compressed air and fluidtechnology. The 50.000 serie is the first line launched on the market from Aignep. ...
AIGNEP
Diameter: 0.5, 0.75 in
Wall bearing elbows WALL BEARING ELBOW WITH FEMALE THREADED BRASS Wall bearing elbow with male/female threaded brass
OMI Officine Meccaniche Industriali
Diameter: 5.5, 5.3, 7.5 mm
Operating pressure: 16, 12 bar
The high flow enhances your tool performance for increased productivity. The secret behind this innovative and patented safety coupling is the highest flow on the market combined with a low pressure drop. During disconnection eSafe ...
CEJN
Diameter: 3 mm - 50 mm
Operating pressure: 6,000,000 Pa - 22,000,000 Pa
Connection by pulling back the sleeve Disconnection by pulling back the female sleeve Shut off by poppet valve Connection under pressure not allowed Disconnection under pressure not allowed Interchangeability according to ISO 7241-1 Part B
FASTER S.p.A.
Operating pressure: 16 bar
Cam locking couplings rank among the most popular fittings in the industry, being used as quick connectors for hoses and pipe systems. In recent years, there has been a market trend towards ever worsening qualities. Elaflex ...
Elaflex Hiby GmbH & Co. KG
... on road and rail tankers, loading arms, manifolds and IBC containers. Mann Tek brand (a subsidiary of ELAFLEX). Materials: Brass, aluminium, stainless steel. Special materials on request. All DDC are also available with ...
Elaflex Hiby GmbH & Co. KG
... or two-piece construction, with SPANNFIX or SPANNLOC clamps. Accessories: MB dust caps, VB dust plugs, chains. Material: brass, aluminium, stainless steel, with Teflon PFA coating. Type MK TW coupler with female ...
Elaflex Hiby GmbH & Co. KG
Diameter: 10 mm - 56 mm
... outer thread metric or PG incl. ferrule [brass/plastic], sealing [TPE] or brass thrust collar and O-ring [NBR] Material: nickel-plated brass Temperature range: -40°C ... +125°C -40°C ...
flexa
Diameter: 10 mm - 56 mm
... safety-type straight, metric outer thread, strain relief, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring Material: nickel-plated brass Temperature range: -40°C ... +100°C Prot. ...
flexa
Diameter: 17 mm - 27 mm
... thread, strain relief for application in EX-Area, incl. ferrule, sealing made of TPE or brass thrust collar [MSD] and O-ring made of NBR Material: nickel-plated brass Temperature range: -40°C ... ...
flexa
Diameter: 4 mm - 12 mm
Operating pressure: 0 bar - 10 bar
... of nylon (KNYT), polyurethane (KPUT), or copolymer (FLEX) Materials: - Body (straight fitting): nickel-plated brass - Body (elbow fitting): nickel-plated brass and ...
Diameter: 4 mm - 16 mm
Operating pressure: -0.1 MPa - 1 MPa
... . Various sizes of unequal union type makes it possible to handle with just one fitting, although two or more fittings are used before. It reduces the amount of fitting used and enables ...
NIHON PISCO CO., Ltd.
Diameter: 3, 10, 2, 1.8, 6 mm
Operating pressure: -0.1 MPa - 1 MPa
Mini-type fitting is 40% smaller than the standard type fitting. Even the ultra-small size, tube can be easily connected or disconnected. The elliptical, ultra-small release ring is employed. Easy ...
NIHON PISCO CO., Ltd.
Diameter: 3 mm - 6 mm
Operating pressure: -0.1 MPa - 0.5 MPa
Barb joint best suitable for space-saving piping. They are optimal for piping vacuum equipment. (Use with vacuum tube.) As for compression type, tube can be tightening by hands. Clean-room Package, best suitable for compact piping ...
NIHON PISCO CO., Ltd.
The stainless steel barrel screw joint with a R 2" steel fine outer thread for tubes with a diameter of 32 mm.
Operating pressure: 25 bar
Operating pressure: 25, 80, 200, 250, 390 bar
... are available in 1/2”, 3/4” and 1” and many thread types, so they can connect any combination of threads and pipes . The fittings are suitable for low and high pressure work. Compatible with plastic garden connector.
NITO high pressure quick coupling Optimal solution for high pressure cleaners and fixed installations. NITO high pressure fittings are manufactured from materials with an exceptionally strong and secure locking mechanism ...
Diameter: 3 mm - 14 mm
Operating pressure: 0.5 bar - 12 bar
Series of push-in fittings with reduced dimensions and new collet and release collar. They are for connecting nylon and polyurethane tubes. Available in various configurations (studs, elbows, T, Y) and with threads Gas ...
Diameter: 2.5 mm - 15 mm
Operating pressure: 0.5 bar - 12 bar
Series of rapid fittings for connecting nylon and polyurethane tubes. They should be used in all those applications where a safer tube-fitting connection is required. Available in various configurations ...
Diameter: 0.125 in - 1 in
Operating pressure: 0.5 bar - 12 bar
Series of standard fittings available in various configurations to adapt the connections of every installation according to one’s requirements. With threads Gas taper (BSPT) and Gas parallel (BSP).
Diameter: 4, 6, 8, 10, 12 mm
Operating pressure: 0 bar - 10 bar
Flow Control with acetal push-in fitting and handwheel regulation Push to Lock flow controllers represent the state of the art in terms of user friendliness and reliability. Push-to-Lock technology makes flow adjustment ...
C.Matic S.p.A.
Operating pressure: 0 bar - 10 bar
The new generation of flow regulators Push to Lock flow controllers represent the state of the art in terms of user friendliness and reliability. Push-to-Lock technology makes flow adjustment by hand much faster with no need for tools. The ...
C.Matic S.p.A.
Diameter: 3 mm - 14 mm
Operating pressure: 20 bar
... circuits The push-in fittings of the MA line are com-pletely made of brass and they are suitable for quick connections in different industrial applications, they are robust. compact and guarantee high ...
C.Matic S.p.A.
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to ...
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries ...
Compression fittings are used for connecting metal tubes useful for high and low temperature applications ad compatibility with aggressive fluids these can be seen in systems varying from gas lines in refineries , to ...
Diameter: 3 mm - 16.002 mm
Temperature Technology Ltd offers a wide range of compression fittings that provide a low cost alternative to stainless steel. This is done by manufacturing fittings with nickel plated brass ...
Diameter: 1.5 mm - 7.95 mm
The Temperature Technology Ltd offers these compression fittings intended to be utilized for temperature sensor systems. This component is made in brass to deliver minimal running cost as an alternative ...
Operating pressure: 350, 700 bar
Connect 2 Quick-test XT 10,000 psi hoses together quickly and easily • Quick-test XT connection makes connecting two high pressure hoses together quick and easy • Note that these are not compatible with QT or QS hoses. Please ...
Ralston
Diameter: 3 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature : -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum : max 98% Materials ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 4 mm - 14 mm
Operating pressure: 16 bar
... structure – Hexagon socket for easy assembly Operating temperature -20°C bis +70°C -20°C bis +80°C For fittings with PVC seal For fittings with NBR O-rings Vacuum max 98% Materials NBR ...
ITV
Diameter: 16 mm - 63 mm
90° Tee with threaded female take off DeltaPress brass press fittings
Unidelta S.p.A.
Ideal for pressure gauges with outlet on the back This horizontal output is very useful for connecting pressure gauges with an output on the back.
Diameter: 0.25, 0.13 in
SWIVELS These have single or double outlet connections for use with standard flanged nozzles and filters to enable positioning of sprays.
Diameter: 8, 10, 12, 4, 6 mm
Operating pressure: 0 bar - 16 bar
The technopolymer Aircomp push-in fittings allow a fast connections of different flexible hoses types. These fittings are available in different tread versions: conical with teflon, cylindrical and ...
Aircomp by Stampotecnica
Please specify:
Help us improve:
remaining