Brass valves

DN: 0.5 in - 3 in
Pressure: 40, 16, 25 bar
Temperature: -20 °C - 160 °C

Full bore · ISO-5211 mounting pad for actuators Characteristics •General industry application. •Blow-out proof stem design. •Triple system of sealing in the stem: 2 virgin PTFE joints and Fluoroelastomer O-Ring. •ISO-5211 mounting ...

... all the components and parts of knife gate valves since 1983. This type of valve is our most traditional product and the one for which we began to receive recognition in the high-quality and high-performance ...

DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar

STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 25 bar
Temperature: -10 °C - 200 °C

... which eliminates the danger of water hammering to the piping system. Series PVS100 angle seat valves are more cost effective than equivalent actuated ball valves, while providing a significantly longer ...

Ball Valves Ball Valves with unresticted flow Ball valves or nickel-lated brass with a chomium-plated ball. Seals fo Teflon (PTFE and NBR). Metal lever (alu alloy). ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -10 °C - 130 °C

Brass butterfly valve full bore, F/F threaded with throttling.

DN: 0.5 in
Pressure: 25 bar
Temperature: 70 °C

Pressure gauge push-button valves with DVGW approval, PN 25 / gas max. PN 4 bar SKU MXT-341MSPB Body material Brass-nickel-plated

DN: 1.25 in

... maintains a secure sealing during the tapping saddles lifetime Quick and easy to install Can be delivered with different valves and pipe thread solutions

Pressure: 16 bar

... hardening technology, and its service lifetime is more than three times that of conventional metal-sealed ball valves. The wear-resistant ball valves are commonly used in working conditions such as silicon ...

DN: 0.25 in - 2.5 in
Pressure: -0.9 bar - 16 bar
Temperature: -20 °C - 80 °C

FARBO, ever following the best performances, renews a new pneumatic globe valves series. Cheaper and compact, they allow to reduce encumbrances and costs. Available with brass body, as standard they ...

DN: 15, 22 mm
Pressure: 25, 16 bar
Temperature: -10 °C - 130 °C

Fixed orifice DZR brass double regulating valveDiameters from DN015 - ½" to DN050 - 2"Threaded F/F (ISO 228/1 for DN15 and DN20, ISO 7/1 Rp above)Olive & nut kit (O/N) for European copper tubing (EN1057) on request: ● ...

DN: 15 mm - 50 mm
Pressure: 40 bar
Temperature: 196 °C

Nitrogen - Oxygen - Argon MATERIALS: Body: AISI 304 L/A 351 CF3 Stem-Extension: AISI 304/Brass Disc: Brass or AISI 304 Disc-Gasket: PTFE

DN: 0.25 in - 2.5 in
Pressure: 25 bar - 63 bar
Temperature: -20 °C - 150 °C

The Siral V2000 is a brass ball valve which features its capacity to make a full flow stream in conveying general steam of water, air, vacuum oils and non-corrosive liquids. It comes with a nominal pressure ...

DN: 0.25 in - 4 in
Pressure: 0 bar - 255 bar
Temperature: -269 °C - 230 °C

... Benefits Redfluid needle valves are designed to offer high performance. The closing by mobile obturation makes both the opening and the closing of the valve smooth, avoiding the seizure of the sealing ...

DN: 12 mm - 44.3 mm
Pressure: 3 bar
Temperature: -5 °C - 100 °C

... cylinder) valve, also known as B-type valve, the cylinder directly drives the valve plate, seal material Viton or Teflon-PTFE selections. Long life, high flow, resistant to air pollution, ...

Push-fit Hep2O includes unique features that enable quick and easy installation with a secure fitting. It is the only push-fit plumbing system with joint recognition, secure demounting and a 50 year guarantee.

DN: 32 mm
Pressure: 40 bar
Temperature: -20 °C - 170 °C

ball valve made of brass DN32 - 1 1/4" inch full port design seal made of 2xO-ring FKM for liquid and gaseous media Seal steam: - 2xO-ring FKM body material: - CW617N chrome plated ball material: ...

DN: 8 mm - 100 mm
Pressure: 16, 25, 30, 64 bar
Temperature: -20 °C - 130 °C

Reduced bore ball valve, F/F threaded, with pressed steel handle.

... Strainer (10K. 20K) 1) Sizes: 1/2 - 20" 2) Rating: 150LB~600LB, 10K~20K 3) Material: Stainless Steel, Carbon Steel, Brass, Cast Iron 4) Connect ending: Flange, Screw, Weld 5) Applicable medium: Water, Oil, Gas 6)Structure: ...

DN: 0.25, 0.125 in

Made of extruded brass (CLA-360) and forged brass (CLA-377). Ideal for compressed air, oil, water and vacuum systems. Allows the control of ideal flow according to the requirement of the system.

DN: 0.125, 0.25 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 80 °C

Throttle valve, both directions throttling (B) quick connector Hose 5/3, G 1/8, For throttling flow rates and regulating the piston speed of cylinders. Small dimensions, ideal for tight spaces. To be screwed directly ...

DN: 0.25 in - 2.5 in
Pressure: 400,000 Pa - 1,600,000 Pa

... glycol. Brass valves are lighter weighted than stainless steel valves but have better corrosion resistance. While because brass valves are more expensive ...

DN: 0.25 in - 4 in
Pressure: 64 bar
Temperature: -20 °C - 180 °C

Flapcon® BA212 Series Two-piece threaded ball valves are manufactured from brass, cast iron, steel casting and stainless steel casting varieties. The ball is manufactured from solid material. Since it ...

DN: 0.5 in - 2 in
Pressure: 0 bar - 7 bar
Temperature: -10 °C - 80 °C

Description 2/3-way valve Impulse without differential pressure Body Stainless Steel, Red brass

DN: 50 mm - 600 mm
Pressure: 0 bar - 8 bar
Temperature: -20 °C - 100 °C

... makes casual contact with the seat during valve opening and closing. When the valve disc reaches the fully closed position, the seat expands against it using pneumatic pressure, providing a tight seal. ...