Built-in pumps

Flow: 0.038 l/min
Pressure: 2 bar
Power: 5.6 W

The HRP series powered by 12VDC or 24VDC offers the best fit to the built-in application. Digitally-controlled stroke per minute range is 0-720 spm. The minimum flow of 0.055ml per shot offers a constant imperceptible injection. The ...

Flow: 30 l/h - 6,000 l/h
Pressure: 0 bar - 250 bar
Power: 1.5 kW - 5.5 kW

The CEREX D metering pump, its double diaphragm design, combined with built-in failure detection, delivers superior leak prevention performance compared to single diaphragm pumps with a similar price point. In addition, the CEREX D metering ...

Flow: 5.1 l/min - 70 l/min
Head: 4.1 m - 15 m
Power: 6 W - 72 W

NRD Series new control signal type of DC brushless motor drive canned centrifugal pumps have been added. Tachometer feedback (rotation speed pulse output Note 1) is possible at the same time as the pump variable input signal. It is compact, ...

Power: 58, 37 W
Fluid temperature: 0 °C - 100 °C
Length: 120 mm

DLX ph-Rx/MBB model consists of a series of microcontroller dosing pumps with pH or Rx (mV), control and regulation built-in instrument. The high reliability and the price competitiveness make the DLX series the best proposal in dosing ...

Flow: 0 m³/h - 5.4 m³/h
Pressure: 0 bar - 6 bar
Head: 0 m - 52 m

Self-Priming JET Pumps SGJW Model:SGJW SHIMGE Pump has been committed to technical researches, manufacturing Self-Priming JET Pumps , as well as providing first-class Self-Priming JET Pumps for the world. The following is about Self-Priming ...

Flow: 0 us gal/min - 6 us gal/min
Pressure: 0 psi - 150 psi
Head: 0'00" ft - 25'00"

No return line required Compact spherical motor design Energy efficient ECM motor Permanent Magnet Electronically Commutated Motor Silent operation Built-in temperature control Built-in 24 hour timer ...

Flow: 320 m³/h
Fluid temperature: 400 °C

The Frame A and LD17 Centrifugal Pumps are pioneering process pumps with the built-in technology to get the most from seal and bearing life. Designed around the seal where 90% of pump failures occur, these centrifugal pumps have a stiffer, ...

Flow: 2 l/min - 13 l/min
Pressure: 140, 100, 110, 120 bar
Power: 0.4 kW - 4 kW

Reciprocating plunger pump, 3 solid ceramic plungers, forged reinforced brass head, aluminum die cast crankcase with cataphoresis coating, double sealing system, hardened steel crankshaft, oversize roller/ball bearings. The pumps of ...

Flow: 0 m³/h - 55 m³/h
Head: 7 m - 375 m
Power: 2.2 kW - 18.5 kW

☆High head, Large flow, High efficiency, Energy saving ☆Ceramic anti-sand structure features, wear resistance, long life ☆Pumpand motor separate structure, easy to Disassembly and assembly ☆Motor in accordance with NEMA standards, ...

Flow: 4.8 m³/h - 31.2 m³/h
Head: 2.7 m - 23.8 m
Power: 0.33 kW - 2.2 kW

Horizontal self-priming centrifugal swimming pool pump with built-in prefilter. Perfect for ensuring water circulation in swimming pool filtration systems. Horizontal self-priming centrifugal swimming pool pump with built-in prefilter. Perfect ...

Flow: 20 us gal/min - 160 us gal/min
Head: 0'00" ft - 96'00"
Power: 3.2 kW

THE BEST SELLING VARIABLE SPEED PUMP IN THE WORLD IntelliFlo VSF pump is the first variable speed and flow pump that adjusts to changes in flow conditions to maintain its preprogrammed flow rate to run optimally throughout the entire ...

Flow: 30, 40 l/min
Pressure: 10 bar - 70 bar
Length: 162 mm

Variable Displacement Vane Pump, Variable Volume Vane Pump Variable Displacement Vane Pump with Built-in Check Valve is easy to be equipped with manifold block. The manifold block can be directly installed at the oil pump outlet, and ...

Flow: 0 m³/h - 25 m³/h
Head: 0 m - 400 m
Power: 0.5 ch - 10 ch

The Constructive Series S 4 “, are multicellular submerged centrifugal electric well pumps for domestic, industrial, irrigation and pressurized water installations by means of hydraulic accumulators. They are designed for the extraction ...

Flow: 32 l/h
Head: 15 m
Power: 30 kW

Item number: 9005401001 Application This compact unit with integrated float is intended for use with units that are only equipped with a condensate collection tray, such as: air conditioning convectors, air conditioning cabinets, ...

This Zinc model of the classic C7 is designed for use in underground mines. The C7-01 hand operated oil pump is suitable for use with a wide range of mineral oils. It is ideal for pumping gear oils and transmission fluids up to SAE 140. ...

Flow: 23 m³/h
Pressure: 50 bar
Head: 278 m

Borehole Pumps, slim and lightweight, multistage construction with a built-in check valve. EST : Pump with nonyl impeller Pump size : 4” Materials : SS304 Flange : RP/NPT threaded - female Applications : Potable Water ...

Flow: 0.0032 m³/h - 0.026 m³/h

Jaeco FRAM 511 diaphragm pumps are hydraulically actuated metering pumps designed for accurate, completely leak-proof metering of difficult-to-handle liquids. The Fram 511 simplex has flow rates from 0.86 GPH to 6.9 GPH with a maximum ...

Flow: 50 l/min

51113 Electric, selfpriming 12 VDC – rotary vane pump (on demand also available in 230 VAC) for the transfer of petrol, with painted body in cast iron with anticorrosive coating, anti-noise lter (electromagnetic compatibility EMC), ...

Flow: 40 us gal/min
Pressure: 10 psi

WSP33 (WSP33K1AA ) FEATURES 1/3hp 115V submersible pump Top discharge 40 gal./min capacity Lightweight durable stainless steel casing Automatic non-mercury float switch Rated for continuous use

Flow: 299 l/min
Head: 12.2 m
Power: 0.75 kW

This lightweight, compact submersible trash pump is ideal for moving water with debris (Maximum size - 1” solids). The Industrial grade cast iron housing and abrasion resistant Cast Iron Impeller with Neoprene Rubber overlay tackles tough ...

Flow: 20 l/min
Pressure: 20 bar
Power: 2.3 ch

Motor-driven pump assembly AR 20 bp BlueFlex™, Rato EHR 80-V cod. 45233, built-in recoil, motor base only. Semi-hydraulic three-diaphragm pump, for use in the gardening or semi-professional agricultural sectors. Reinforced polypropylene ...

Flow: 0 m³/h - 11 m³/h
Head: 0 m - 8 m
Power: 0.52, 0.38 kW

The big sister of the U3 K with more power 5-year warranty for plumbers when registered at www.hauptsachejung.de/en Made in Germany Cooling jacket for motor housing Low level pumping by detachable strainer base Flushing ...

Flow: 20 l/min - 250 l/min
Head: 5.7 m - 12.2 m
Fluid temperature: 0 °C - 40 °C

Drainage pumps made of corrosion-resistant material for emptying cesspits, cisterns and for gardening. The single-phase version with built-in capacitor and thermal protector can be equipped with a float switch.

Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch

For neutralization and removal of acidic condensate produced by high-efficiency combustion equipment. When not neutralized, acidic condensate has the potential to harm the environment and any plumbing it comes in contact with due to its ...

Flow: 70 l/h - 190 l/h
Pressure: 9 bar

The MGCF04S, and MGCF11S 12 and 24V brush DC drives are robust and built to provide great performance and reliability for intermittent duty applications. They include a pump-to-motor plastic adapter - which thermally separates the pump ...