Butterfly valves

DN: 50 mm - 200 mm
Pressure: 10 bar

BUTTERFLY VALVES AISI 316 BODY, DISC AND SHAFT,FLANGES PN10 AND ANSI 150 Butterfly valves type Wafer : - AISI316 body, disc and shaft - PTFE body seat over EPDM ...

DN: 25 mm - 100 mm

Valves by Velo Acciai include ball valves, butterfly valves, two-way valves for nitrogen and non-return valves. Technical features Sizes ...

DN: 250 mm - 1,000 mm

Use : For general applications, fluids, gas and water treatment. Body shape : Double flanged Type : 2314 Tightness: Elastomer (EPDM/NBR/VITON/HYPALON/NEOPRENE/SILICONE) Face to Face : EN 558-1/20 Max working pressure : ...

DN: 20 mm - 354 mm

A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, ...

DN: 100 mm - 400 mm

Aluminum butterfly valve for handling powders available from Ø100 to Ø400 mm. The valve can be supplied for hot materials with manual lever or pneumatic drive.

DN: 50 mm - 300 mm
Pressure: 10 bar

The BYV butterfly valves are available in various materials of construction for bodies and discs like PVC, CPVC, and GFPP. The liners and seals are available in various materials like VITON, EPDM or Nitrile ...

DN: 150 mm - 300 mm

The Pharmalite is an eccentric butterfly valve designed for various industrial application. It is created out of stainless steel EN 1.4404 with 0.5 microns inner and 1.2 mm outside dimensions. Its inflatable ...

DN: min 3.0 in

... offers wide array of Butterfly valves that measure from 3"to 8". These valves are offered in different construction made of nickel-plated disc with cast-iron framework, nylon-coated disc ...

DN: 80 mm - 3,600 mm
Pressure: 75 psi - 250 psi
Temperature: 143 °C

Design Features:DeZURIK AWWA Butterfly Valves meet the requirements of AWWA C504 and C516 standards. They are used for shutoff on clean water and gases. Offset disc design, corrosion resistant shaft, ...

DN: 150 mm - 400 mm
Pressure: 50, 25 bar

INTER-TECH valve is equipped with métal to métal sealing, for severe applications where a plastomer seat is not viable. TECHNOLOGY Plate standardisée) in accordance with EN-ISO 5211 Adjustable stuffing box Graphite ...

DN: 150 mm - 1,500 mm
Pressure: 0.2 bar - 3 bar
Temperature: 200 °C

Max Leakage Class III (FCI 70-2) End Connections: Wafer, Flanged Material: Carbon Steel, AISI 304, AISI316 General Characteristics - ON/OFF or MODULATING Service or according to Customer Drawing - Outside Bearing - Tightness ...

... , cost-effective, valve to modulate or open/close the flow of the fluid. Butterfly valves are available in concentric or eccentric design (double/triple), have a compact shape and are ...

Pneumatic butterfly valve has good two-way sealing function, it is used in pipelines of different media in petroleum, chemical industry, metallurgy, electricity, food, medicine, water supply and drainage, ...

DN: 40 mm - 800 mm
Pressure: 10, 16 bar
Temperature: -40 °C - 200 °C

Soft seated elastomeric Butterfly Valves SBE are available in either wafer or lug design for on/off, throttling or control applications for dilute acids and lyes, powdery media or gaseous service. Main ...

DN: 2 in - 12 in
Pressure: 300 psi
Temperature: 120 °C

1.Maximum Working Pressure: 300PSI (Max. Test Pressure: 600PSI) 2.Maximum Working Temperature: 250ºF (120ºC) 3.Application: Indoor and Outdoor Use 4.Double-Seal Disc: Resilient EPDM Coated 5.Factory Installed Supervisory Tamper Switch Assembly

... required by butterfly valves. Gearboxes are designed to enable butterfly valves to be opened by one person manually by turning the handwheel under rated pressure acting ...

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...

DN: 200 mm - 4,000 mm
Pressure: 25, 10, 40, 16 bar
Temperature: 0 °C - 80 °C

... to be removed with the valve remaining in service in the open or closed position. Operated with gearbox + handwheel and with ISO 5210 top flange to be coupled with an electric actuator, if required at a later date. Valve ...

DN: 0.5 in - 16 in

From the body to the cap. At Bidegain we manufacture all the components of butterfly valves to high standards to guarantee the quality and performance of all our valves. Seat ring ...

The “singold” Flap Shutter is used for all kinds of bulk material and solid-liquid mixtures, when the container is to be completely emptied. Examples: Container scales, container, primary and secondary vessels in mixing plants, wagons, ...

DN: 100 mm - 3,000 mm
Pressure: 10, 16, 25, 40 bar

... eccentric valves used for their strength and resistance even at high pressure. Made in high quality ductile cast iron with stainless steel shafts and a welded-on seat ring. STANDARDS OF MANUFACTURE EN 593 METALLIC ...

DN: 50 mm - 600 mm

Ductile Iron Full Lug Butterfly Valves Size: 2 to 24 in. (50 to 600mm) Description: These soft-seated butterfly valves are designed for a variety of general applications ...

DN: 1 in - 6 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 95 °C

... /BS4825-1/AS1528-1 End connections butt weld(std) for inch tubing(O.D.tubes) STAINLESS STEEL HYGIENIC BUTTERFLY VALVE

DN: 3,600 mm
Pressure: 10 bar

Type: Ductile Iron Butterfly Valve. Body Material: Ductile Iron. Seat Material: EPDM. Operator: Gear.

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -10 °C - 130 °C

Brass butterfly valve full bore, F/F threaded with throttling.