Pressure: 0 bar - 40 bar
Voltage: 4, 5 V
... actually able to detect and reject the component being tested with the specified leak. LTC has been designed as pressure calibrator to verify and certify the equipment pressure and flow measurements. Through LTC ...
The BB976 Portable Blackbody Calibration Source is specially developed to calibrate non-contact infrared thermometers over the temperature range 30°C to 550°C. The device proves highly suitable as primary radiation source for infrared ...
Calex Electronics Limited
Noise level: 94 dB - 114 dB
... sound level calibrator. Also for calibration and verification of microphones in audio technology, you need a sound level calibrator, which is designed to produce several sound pressure levels at a fixed ...
Temperature: -24 °C - 140 °C
Voltage: 12 V
Portable calibrators have a quick response time and good accuracy and stability, which means that they can calibrate temperature sensors both in a lab and on the field in a short time. Liquid calibrators ...
GIUSSANI SRL
Frequency Laser Standard in new form factor. It is now available in rack mount to make your laboratory ergonomics even better. This automatic laboratory device is designed to calibrate and compare He-Ne (632,8nm wavelength) lasers. We ...
Temperature: 14 °F - 122 °F
Pressure: 50 psi - 10,000 psi
Speed through Calibration Tests With single button logging of both Device Under Test (DUT) and Reference readings, techs get completely digital logging of test points. Instant tolerance feedback at each point lets you know sooner ...
Ralston
A gas preparation device for calibration of a flow ratio mixing system for the purpose of using calibration of an atmospheric sulfur dioxide analyzer, a nitrogen oxide analyzer, and a carbon monoxide analyzer. A zero gas generator is ...
Pressure: 0 psi - 40 psi
Voltage: 120 V
The CleanAir 5 CHANNEL CALIBRATOR is designed to interface EMC analysers with five individual calibration gases. The gases can be controlled manually or remotely to pass through one of the two calibration ports. Designed ...
Temperature: -100 °C - 40 °C
Calsys -100/40 offers easy to use portable low temperature calibrator with temperature range from -100 to 40°C. It is a highly stable standard furnace for calibrating RTD. This calibrator can be used ...
TEMPSENS
Temperature: 50 °C - 650 °C
CALsys 650 offers easy to use portable temperature calibrator with medium temperature range from 50 to 650°C. It is a highly stable standard furnace for calibrating thermocouples / RTD. This calibrator ...
TEMPSENS
Temperature: -80 °C - 50 °C
Calsys -80/50 offers easy to use liquid temperature calibrator with high temperature range from -80 to 50°C. It is a highly stable standard furnace for calibrating thermocouples / RTD. It provide superior thermal environment ...
TEMPSENS
Temperature: 0 °C - 1,200 °C
Weldotherm® recommends this robust precision measurement and calibration device for use on construction sites. Through the use of a toggle, temperatures can be simulated or measured precisely. The measurement device has a built-in reference ...
* Professional, 125 Hz/94 dB sound source. * Die casting aluminum alloy housing case. * DC 9V batteries x 2 PCs. * Size : round 50 mm Dia. x 145 mm ( length ).
Lutron
Temperature: -45 °C - 85 °C
The VC-01 Handheld Calibrator is a low cost reference accelerometer device that allows the user to quickly check the response of accelerometers at a known fixed frequency and level. Ideal for use in the field or in a ...
M2710 is the new digital portable calibrator of ForTest® M series. Enclosed in a container of anodized aluminium with shatterproof plexiglass front, we find a completely new circuit board and a mass flow meter sensor, ...
... testing programme parameters used is normally carried out with the aid of two accessories, calibrated leak devices or leak calibrators. Calibrated leak devices are used to simulate the maximum leakage value of the ...
Temperature: -10 °C - 50 °C
Noise level: 114, 94 dB
• Accurate and Simple to use • Fits 1’, 1/2” or 1/4” diameter microphone
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: -3 V - 220 V
• Unique mapping function let you calibrate temperature (300 °C) or voltage (220V) directly. • iCal is a multifunction calibrator and an arbitrary function generator. • Source: mA (4 to 2OmA), V (0 to 15V, 0 to 7OmV), ...
TES Electrical Electronic Corp.
Temperature: -200 °C - 2,310 °C
Voltage: 0 V - 600 V
• Source 4’’20mA loop current. • 4»2OmA (1KÇ load, 24V loop supply). • Source: 0’.’lOOmV, 0’4.000V, 0» 12.000V. • Measure: DC mA, mV, V, Q, Frequency (duty cycle), Diode, Continuity and temperature (°C, °F) • Measure: AC (Tnie RMS) ...
TES Electrical Electronic Corp.
Voltage: 0 V - 5 V
VIR GENERATOR UNIT U8794 Generation unit can be used for various simulation tests instead of sensor output Overview Key Features • - As an inspection device of the ECU, it is ideal for generating simulation signals of various sensors, ...
Temperature: 0 °C - 45 °C
... Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator ...
Temperature: 0 °C - 45 °C
... Detective™ is an easy to use all-in-one airflow calibrator that is suitable for all types of air sampling pumps and other applications for flows up to 5L/min. It is a rugged, compact lab or field portable calibrator ...
Noise level: 94 dB - 114 dB
The field calibration of Sound Level Meters is an essential procedure when carrying out any type of noise survey both before and after each measurement sequence. This ensures that instruments are providing consistently accurate readings ...
Portable vibration calibrator allowing the periodic field checking of accelerometer sensitivity.
Temperature: -10 °C - 50 °C
SV 111 vibration calibrator is the State of the Art instrument designed for human vibration measurements according to ISO 8041. The design of the calibrator is based on the triaxial reference accelerometer ...
SVANTEK Sp. z o.o.
Temperature: -200 °C - 2,300 °C
Voltage: 100 mV
... LCD backlight, auto power off, bi-color injection case and 1m drop proof. Features of UT701 Single Function Temperature Calibrator Certifications: CE, UKCA ● Up to 0.05% output accuracy ● 6-digit display ● ...
Temperature: -20 °C - 60 °C
Voltage: -100 V - 100 V
... 334 milliamp loop calibrators from other manufacturers include better longer term stability, accuracy, reliability & ruggedness plus improved battery life. PIE Model 334 is the perfect replacement for your worn out milliamp ...
PIE - Pratical Instrument Electronics, Inc
Pressure: 2,000 bar
AEP transducers
Universal instrument for monitoring and calibration of signal converters and process data Supplies or monitors current- and voltage signals Analogue adjustment and digital display Supplied from battery or line via adaptor Made in accordance ...
Temperature: 23 °C
Noise level: 94 dB
• 94dB Sound Calibrator At 125Hz And 250Hz • Accurate And Simple To Use • Fits 1inch And 1/2inch Microphones • Low Battery Indicator • IEC 60942(2003) Class 2, Ans1.40-1984 Total Harmonic Distortion: < 4% Reference ...
Temperature: 23 °C
Noise level: 94 dB - 114 dB
• 94dB And 114dB Sound Calibrator At 1KHz • Accurate And Simple To Use • Fits 1inch And 1/2inch Microphones • Low Battery Indicator • IEC 60942(2003) Class 2, Ans1.40-1984 Output Frequency: 1000Hz ±2% Total Harmonic ...
Temperature: -10 °C - 60 °C
Pressure: -0.85 bar - 700 bar
... pressure on a test object that is fitted to the calibrator can be built up quickly, and tracking is made easy thanks to the integrated display. Test objects are connected to the low-pressure calibrator ...
Temperature: -10 °C - 60 °C
Pressure: -0.85 bar - 31 bar
... pressure on a test object that is fitted to the calibrator can be built up quickly, and tracking is made easy thanks to the integrated display. Test objects are connected to the medium-pressure calibrator ...
Temperature: 0 °C
Pressure: 0 bar - 840 bar
The high-pressure calibrator (HPX) is used to generate pressure in order to check and calibrate mechanical and electronic pressure measurement devices with the help of comparative measurements. The pressure generator ...
Temperature: -10 °C - 50 °C
Voltage: 50 V
The Beamex MC5 Multifunction Calibrator was discontinued in 2014. The Beamex MC5 was an all-in-one documenting multifunction calibrator for calibrating pressure, temperature, electrical and frequency ...
Beamex
Please specify:
Help us improve:
remaining