Diameter: 50 mm
End cap Ø 50mm Galvanised steel end cap 50 mm diameter
baromax end caps are suitable for two applications: 1. To close open ends of tubing. 2. As a basis for manufacturing individual connections. The end caps are equipped with one high-pressure connection.
SS304 end cap for polymer pipes hydrostatic pressure testing. there are two type, first is 3pcs cap second is 4 pcs cap. In 3 pcs end caps for bigger sizes than 63mm ...
Diameter: 1 in
Air breathers and filler plugs, oil dipstick, antisplash to avoid fluid coming out through the tank Small sizes for mini power packs. Available features: antisplash, oil dipstick, air breather
MP Filtri
Model SP131 is a cap assembly with threaded cap and wide fill opening for easy filling, inspection and cleaning for the Haws gravity fed eyewashes.
End caps for additional protection of sharp objects • prevents the content from penetrating • made from impact resistant ABS • end caps can be clipped on the bottom of the BlockPack outer and inner ...
rose plastic
The IP68 Solution offering dust and moisture protection which is ideal interconnect solution for heavyduty and harsh-environment applications. RJ45 connector is the most common used interface in data communications and the 4PPoE compliant ...
EmCom Technology Inc.
Thc IP68 Solution offering dust and moisture protection which is ideal interconnect solution for heavyduty and harsh-environment applications. RJ45 connector is the most common used interface in data communications and the 4PPoE compliant ...
EmCom Technology Inc.
The IP68 Solution offering dust and moisture protection which is ideal interconnect solution for heavyduty and harsh-environment applications. RJ45 connector is the most common used interface in data communications and the 4PPoE compliant ...
EmCom Technology Inc.
... 2.35 & 3.00 MM Pre-formed, seamless abrasive caps can be used over the entire tool surface while working. They are available in three abrasive grades and with a choice of conventional or quick-change cap ...
The OxyGuard Anti-fouling Cap is a cap that inhibits growths on the membrane of OxyGuard Standard Probes, especially probes used in sea water. The cap is essentially the same as the normal ...
Square glass white canvas sandblasting cap/curved glass green canvas sandblasting cap Square glass white canvas sandblasting caps and curved glass green canvas sandblasting caps ...
DP01 protects the dome of the pyranometer during transport, installation and removal. Its purpose is to reduce the risk of accidental damage to the pyranometer domes. Our service records show that replacement of scratched and broken domes ...
STOPPER, CAP DESIGN Joint 29/42 For apparatus having an inner opening. Joint：29/42
Composition is dolomite, purity and strength is high, heat preservation and insulation is good.
Diameter: 14 mm - 90 mm
Dust caps for self sealing couplings, thru type couplings as well as dust caps for self sealing adaptors and thru type adaptors The dust caps consist of a soft PUR plastic (blue) that ...
... plant, storage, and trailer floors. The 40″ x 48″ StakCap is a single-sheet thermoformed (HMWPE) top cap. The geometry of the StakCap allows the top cap to be used with ORBIS 24″ x 20″ and 24″x 16″ totes. ...
Diameter: 20 mm - 225 mm
Cap MV SDR 11 Gas, water and H2 Safety technology DVGW test mark: DV-8601AU2248 and DV-8606AU2249 Areas of Application The FRIALEN-End Caps MV are used to close HD-PE pipe ends. Also recommended ...
Aliaxis
Operating temperature: -30 °C - 80 °C
Properties Material - PE Color - Black General Information Type - RJ11 Packaging Properties Packaging - Bag
- Optimale protection against the peel off of the magnetic tape / cover tape - Reduce the hazard of injury by sharp edges
Diameter: 25 mm - 630 mm
... plastic injection pipe cap is 1.25MPa; when dn≥400mm, the maximum nominal pressure of PE plastic injection pipe cap is 1.0MPa; the gas distribution pressure can reach 0.4mpa. Executive standards: for ...
- protection caps compatible with socket and plug of series VT1800 and VT1811 - Material polyethylene (PE)
Diameter: 50 mm - 1,200 mm
Reinert-Ritz end caps are characterised by their sophisticated design. For full pressure resistance, these fittings have a relieving groove that evenly spreads pressure forces over the ground. The compact end cap ...
Reinert-Ritz GmbH
Diameter: 16 mm - 160 mm
Operating temperature: 0 °C - 60 °C
Series of fittings designed for conveying fluids under pressure with a metric solvent weld jointing system Standards: EN ISO 1452, EN ISO 15493, EN 727, DIN 8063
Effast
Diameter: 140 mm - 1,600 mm
... following types of end caps: CS/CSL end caps are made with negative tolerance and are inserted inside a round duct. They are also produced with a handle enabling frequent opening of an access eye as ...
Electrical Insulating End Cups cover uninsulated conductor parts
Please specify:
Help us improve:
remaining