DN: 32 mm - 900 mm
Pressure: 6, 2.5, 16 bar
Temperature: -20 °C - 200 °C
... extremely versatile and reliable butterfly valve is available with a ductile iron body and a stainless steel body as wafer, lug or U-section body type. Thanks to the range of conductive disc and liner ...
InterApp AG
DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C
... the request of customers . The gate valve body is made of cast steel and it is suitably dimensioned to assure a high safety factor. The thicknesses are always higher than the mini-mum ones established ...
Di Nicola Infinam Srl
DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C
Di Nicola manufactures butterfly valves in single , double and triple offset in alloys of ductile iron EN GJS 400 to EN GJS 500 , malleable cast iron GJL 250 and high- ...
Di Nicola Infinam Srl
DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar
... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...
Di Nicola Infinam Srl
DN: 20 mm - 200 mm
Pressure: 0 mbar - 500 mbar
Temperature: -20 °C - 450 °C
VF VFT VFH Butterfly valves for air and gas VF, VFT and VFH butterfly valves are designed for regulation and control of air and gas flow. Valves can be operated manually using ...
DN: 25 mm - 450 mm
Pressure: 3, 4, 2 bar
... operated pinch valves of the RVA series can be made with a flange connection complying with ANSI B 16.5- 150lbs, if required. Structure of RVA series The RVA series air operated pinch valves consist ...
AKO ARMATUREN
DN: 50 mm - 1,200 mm
Pressure: 10, 6, 5, 4, 2 bar
... unidirectional Knife Gate Valves encompasses a so-called wafer style cast monoblock body, with raised face and reinforced ribs for larger nominal diameters for extra body strength. The monoblock body ...
AKO ARMATUREN
DN: 50 mm - 600 mm
Pressure: 10, 4, 6, 5 bar
The AKO type B knife gate valve is a bi-directional wafer valve for media of high consistency. It is predominantly used in the paper and pulp and chemical industries, in water treatment, ...
AKO ARMATUREN
DN: 100, 32, 80, 40, 65 mm
Pressure: 28, 27.6 bar
Temperature: -50 °C - 105 °C
... Suction Stop Valves are used on low temperature applications to positively close suction lines and both liquid legs and gas returns on flooded evaporators. These piston type, gas pressure powered, normally open, heavy ...
Pressure: 0 bar - 350 bar
Temperature: -20 °C - 50 °C
Flow rate: 320 l/min - 1,900 l/min
The pilot operated 2-way high response valves series TDP provide a precise control of high flows at maximum dynamics. Typical applications for these slip-in cartridge proportional throttle valves are ...
DN: 15 mm - 200 mm
Pressure: 9.6 bar - 16 bar
Temperature: -10 °C - 300 °C
Streamlined flow valves, Streamlined flow valves bellows type, Streamlined flow valves bellows type on cast iron PN 16 (EN-GJL-250) Inside screw streamlined ...
Mival
DN: 50 mm - 1,200 mm
Pressure: 10 bar
Temperature: -10 °C - 120 °C
Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of nodular cast iron, bi-directional, with gland packing, non-rising stem, corrosion-protected by epoxy ...
KSB
DN: 15 mm - 350 mm
Pressure: 25 bar
Temperature: -10 °C - 350 °C
Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable valve ...
KSB S.A.S. - France
DN: 1.31, 1 in
Pressure: 5 psi - 400 psi
... Type DDR differential pressure regulating valves have a cast iron painted body with copper connections and the (O)LDR) differential pressure regulating valves have a ...
DN: 10, 6.4, 4.8 mm
Pressure: 690 bar
Temperature: 538 °C
... suit each application. -Heavy duty needle type globe valve ensures bubble-tight shut-off on venting or isolation service. -Outside screw and yoke (OS&Y) needle type globe valve with investment cast ...
Emerson Automation Solutions - TESCOM
... and YS three-way cage-guided valves are designed for throttling or on/off service, and are available in balanced and unbalanced constructions. The YD valve is used in general converging and diverging ...
DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -15 °C - 200 °C
Special features • - Consisting of single-seated globe valve and actuator • - Flanges or male thread connection and welding or threaded ends or female thread connection Accessories • - Type 2 NI Strainer Options ...
SAMSON
DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C
... MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: 4-way valves with nominal diameters DN 32...50 Can be combined with the AR30 and ASM 105, 115, 124 motorised actuators Manual adjustment ...
DN: 20 mm - 150 mm
Pressure: 3.5 bar - 6 bar
Temperature: 135 °C - 180 °C
For control of air, water, gas, steam in textile, power generator, paper & pulp, chemical, petrochemical industries, PSA nitrogen system, air dryers, gas generators & others. Upto 50 mm 300 cy/hr.,(tested on air,on other fluids this figure ...
DN: 16 in - 24 in
... 24” Bodies: PDCPD Discs: PP or PVDF Seats & Seals: EPDM, Nitrile and FKM Operators: Plasgear™ (16”) Epoxy Coated Cast Iron Gear (18” – 24”) Stems: 403 SS (Standard) 316 SS, Titanium, Hastelloy-C® - Optional
Asahi/America, Inc.
DN: 0.5 in - 56 in
... forged steel gate valves. Its gate valve iron gate are resilient or metal-made with metal-seated, PN10 to PN16 or ANSI 150, sizes ½” to 40”. It also provides an ANSI 150, 300, 600, 1500, ...
DN: 2 in - 12 in
Pressure: 200 psi
Temperature: 225, 250 °F
... information. Choose NIBCO® cast iron butterfly valves for versatile and economical valve applications in commercial, mechanical and industrial applications. NIBCO® butterfly ...
NIBCO
DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C
Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...
VAG-Group
DN: 2 in - 3 in
Pressure: 80 psi
... etc. The valves are used in combination with a complete AMOT control system using AMOT sensors for monitoring the condition of the engine. Features and Benefits Compact Design No Adjustments Required ...
DN: 2 in - 10 in
The cast iron/epoxy coated, Class 125 Apollo InternationalTM 6PLF Series Lead Free* Ball Valves offer unobstructed turbulence-free flow that gate and butterfly valves ...
DN: 2 in - 10 in
Pressure: 13.8 bar
2 to 10 in. (50 to 250mm) Description: Series G4000-FDA 2-Piece, Full Port, Cast Iron FDA Approved Flanged Ball Valves are used in commercial, industrial, and process applications requiring a non-corrosive ...
DN: 40 mm - 125 mm
Pressure: 6, 16 bar
Temperature: -20 °C - 80 °C
The asa butterfly valve with SAE and DIN flange connections allows the combination with an elastic element (rubber compensator expansion joint) to make a short compensating and economical connection with the pump port. ...
DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -60 °C - 180 °C
Features •High reliability due to thick-walled PFA lining: universal resistance and maximum permeation resistance •Safety also at high pressures and temperatures due to heavy-duty bellows •Easy to maintain: seat and plug individually ...
Richter Chemie Technik
Pressure: 250 bar
Flow rate: 120 l/min
... connect valves in series using a HPCO coupling. If a HPCO (fitted to T1) is installed for the use of downstream valves, a second pressure relief valve is required to control the pressure ...
Please specify:
Help us improve:
remaining