CE power supplies

Input voltage: 100 V - 240 V
Output voltage: 24 V
Current: 2.5, 5, 10, 20 A

... connection to a wide range of single-phase supply systems. Reliable primary switched-mode regulator for limited budgets The regulated 24 V power supplies are designed for standard ...

Input voltage: 90 V - 264 V
Output voltage: 12, 5, 3.3 V
Current: 0 A - 100 A

... very high efficiency 1200 watt, power factor corrected front end supply with a 12V main output and a 5V or 3.3V (3A) standby. They have active current sharing and up to 8 supplies may ...

Input voltage: 240, 120 V
Output voltage: 43 V - 57.5 V
Power: 1,100 W - 4,000 W

... an integral DC distribution panel with easy to fit push-in circuit breakers and low voltage disconnect contractor. All these contribute to system solutions to suit your requirements. System - System ...

Input voltage: 90 V - 264 V
Output voltage: 3.3 V - 48 V
Current: 1.7 A - 16 A

• Universal AC input • Built-in EMI filter • Optional Cover

Input voltage: 94 V - 264 V
Output voltage: 5, 24, 12, 15, 21 V
Current: 0.63, 5, 2.5, 2, 1.25 A

■ DIN-rail mounting ■ Output permanent short-circuit proof and SELV according to EN 60950 ■ Overtemperature protection ■ Mains buffering 40 ms

Input voltage: 208 V

Space-saving DIN-rail switching power supplies.Can be installed in six mounting directions. Optional mounting bracket is available for panel mounting. CE marked (LVD, EMCD) EN61204-3 ...

Output voltage: 12 V
Current: 8.5 A
Power: 102 W

Switched power supply from Mean Well with wide input range. Output voltage 12VDC and power 102W. With its in-built potentiometer, the output voltage can be fine-tuned for your application. ...

Power: 20 W - 240 W

General Purpose Power Supplies IEC 60297 Eurocard Pluggable DIN H15 connector UL, CSA and CE approved 20 – 240W versions

Input voltage: 190 V - 240 V
Output voltage: 13.5 V
Current: 2 A

Reliable and strong stabilized power supply, analog technology, good performances and good price. Features: • interference less • duty cycle 70% • lightning damage protection • no fan Applications: ...

Input voltage: 85 V - 264 V
Output voltage: 12 V - 48 V
Current: 0 A - 12.5 A

This series AC-DC switching power supply is Class-I design which is with Protected Earth. The units are constructed on a printed circuit board in a 2.95 x 6.3 x 0.988 inches form factor low profile. Input ...

Input voltage: 90 V - 370 V
Output voltage: 24 V

• Operating ambient temperature from -40°C to +70°C • High power density • High peak current (150% of the rated current) • High I/O insulation test voltage of 3000 VAC • SELV components design

Input voltage: 115 V - 230 V
Output voltage: 24, 48 V
Current: 0 A - 21 A

... suitable for distribution board that supplying power source for PLC, HMI and I/O devices. Long life aluminum electrolytic capacitor, 100% burn-in testing and moisture proof coating to let the industrial ...

Input voltage: 85 V - 264 V
Output voltage: 12, 24 V
Current: 0 A - 12.5 A

Mains switching power supplies | Power supplies | Products Technical Data AC input range selectable by switch Protections : Short circuit / Over load / Over voltage CE ...

Input voltage: 85 V - 265 V
Output voltage: 5 V - 36 V
Current: 0 A - 1.2 A

Standby Power: ≤0.1W Efficiency Level: COC V5 Protection: Short Circuit, OCP, OVP Dimension: 60*39*64mm

Input voltage: 100 V - 240 V
Output voltage: 19 V
Current: 3.42 A

... operation Country specific AC input cables available LED for status indication Input Input current - 1.70A max. Stand by power - < 0.21W @ no load Output Ripple & noise - <0.30V pk-pk Over current protection Over ...

Input voltage: 90 V - 264 V
Output voltage: 12, 24 V
Current: 1.67, 0.83 A

-Slimline design with fully sealed aluminum housing -With the newest topological structure,efficiency up to 85% -100% fuii load burn-in test

Input voltage: 220, 380, 400, 420 V
Output voltage: 24, 48, 110, 220 V

... yoktur. NECRON’s rectifier series with wide range of power and application provides the best solutions for extended supply requirement NECRON’s rectifiers such as battery chargers, DC power ...

Input voltage: 220 V
Output voltage: 12 V
Power: 700 W

Rated power:700W Rated capacity:692.64Wh Standard capacity:3.7V187200mAh Overload protection:730±20W AC output：110V±10%/60HZ Output Wavie: Sine Wave USB output:QC3.0/18W Type-C output:PD60W Cigarret lighter output:14V/8A DC ...

Input voltage: 400, 230, 115 V
Output voltage: 24 V - 349 V
Power: 15,000, 50,000 W

... carry out maintenance or to power test benches. In marine applications, this power supply range is used to create on-board emergency networks to power automats and ...

Input voltage: 90 V - 264 V
Output voltage: 13.8 V
Current: 1.9 A

DRC-40A is a 40.02W 13.8V 1.9A DIN Rail Power Supply with secondary 13.8V 1A battery output, designed to be used with an external battery (not included), and security systems with DC ...

Input voltage: 90 V - 264 V
Output voltage: 5 V - 24 V
Current: 0.01 A - 2.4 A

... VI COC V5 Tier2 • Input type : fixed plug type & detachable plug type • Output type: direct USB output & fixed DC cable type KEY APPLICATIONS Mobile phone Tablet PC Modem Monitor ...

Input voltage: 220, 110 V
Output voltage: 25 kV
Current: 3 A

... control the laser power. • The Laser power supply has output open circuit protection. Under the condition of good protective earthing, the power supply ...

Input voltage: 180 V - 576 V
Output voltage: 12, 24, 48 V
Current: 1.2, 2.4 A

The SQ series from RECOM sister company PCS comprises high-efficiency DIN-RAIL power supplies with ratings from 60W to 1500W and single trimmable DC outputs of alternatively +12V, +24V ...