Centrifugal blowers

Model 8299 Gen4 Ionizing Point In some situations, even the smallest amount of airflow can disturb the product. This is especially true for lightweight materials. EXAIR manufactures the Gen4 Ionizing Point to be effective for spot neutralization ...

Flow: 400 m³/h
Operating pressure: 470 Pa

Ensure reliable air flow across the thermal system even at low speeds: Bosch blowers and fans have been developed to achieve the lowest possible noise level. They are available worldwide in single and bulk packaging and ...

Flow: 300 l/h
Operating pressure: 1.85 Pa
Nominal power: 128.7 W

Ensure reliable air flow across the thermal system even at low speeds: Bosch blowers and fans have been developed to achieve the lowest possible noise level. They are available worldwide in single and bulk packaging and ...

Flow: 390 m³/h
Operating pressure: 470 Pa

Ensure reliable air flow across the thermal system even at low speeds: Bosch blowers and fans have been developed to achieve the lowest possible noise level. They are available worldwide in single and bulk packaging and ...

Flow: 3 m³/min - 160 m³/min
Operating pressure: 300 mbar - 1,100 mbar
Nominal power: 7.5 kW - 250 kW

When it comes to KAESER rotary screw blowers with the SIGMA Profile, efficiency is more than just a promise. As operation-ready, “Plug-and-play” complete solutions, low-maintenance blower systems offer ...

Flow: 5 m³/min - 156 m³/min
Operating pressure: 1,000, 800 mbar
Nominal power: 10 kW - 250 kW

Our single-block blowers provide maximum flexibility. The OMEGA series blowers with their three-lobe rotors minimise pulsation and include a wide range of rotary lobe blowers for stationary ...

The Oval-G hot air blower is a powerful heat gun with an output of up to 3400W. This hot air device can be heated to up to 700 °C with a continuously variable temperature setting. The powerful hot air blower ...

Flow: 300 l/min
Nominal power: 3,000, 3,400, 2,200 W
Sound level: 70 dB

The Grand-S-electronic hot air blower is used wherever hot air flows are required for the purpose of heating, warming up, deforming, shrinking and activating. The heating power of either 3000 W or 3400 W 230 V is infinitely ...

Blower equipped with Smartwave technology capable of reducing higher frequencies, thus generating a more uniform sound emission with less acoustic impact on humans.

Flow: 0 m³/h - 2,382 m³/h
Operating pressure: 0 mbar - 375 mbar
Nominal power: 3 kW - 26 kW

... single stage blowers are equivalent to 2 MS blowers in parallel with a single electric motor. This allows an increase in the fluid volume, reaching flow rates up to 2400m3/h-60hz. Characterized by a high ...

Flow: 0 m³/h - 1,216 m³/h
Operating pressure: 0 mbar - 650 mbar
Nominal power: 2.2 kW - 26 kW

... side channel blower can cover a wide range of flow/pressure combinations. The maximum flow rate that can be treated is 2.400 m3/h while the relative pressure range goes from -450 mbar (vacuum) to +650 mbar (pressure). ...

Flow: 265 ft³/min - 620 ft³/min
Nominal power: 420 W

... locking stand, fan speed control, optional airflow heater and separate balance and fan stall alarm LEDs with optional audible alarm. These features, plus its stylish design, make the Aerostat XC2 the ...

Flow: 660 m³/h
Nominal power: 140 W

The VolumION is a very robust ionizing air blower with an effective ionising width of 500 mm. The VolumION consists of a motor, two fans and an ionisation unit. Ambient air is drawn on two sides and blown off along three ...

Nominal power: 120 W

The HP-N-Ex ionizing air blower consists of a motor and a fan. The ambient air is drawn on one side and blown off along an anti-static bar. The effective ionizing width is 500 mm. This ionisation blower ...

Flow: 60, 50 m³/h
Operating pressure: 120, 100 mbar
Nominal power: 0.23, 0.2 kW

The Smooth-Running Vacuum and Overpressure Generator Reliable Robust and light-weight construction, effective air cooling, long lifetime, nearly maintenance-free, dry and contact-free operating principle Flexible Vacuum or overpressure ...

Flow: 80, 96 m³/h
Operating pressure: 100 mbar - 160 mbar
Nominal power: 0.25 kW - 0.5 kW

The Smooth-Running Vacuum and Overpressure Generator Reliable Robust and light-weight construction, effective air cooling, long lifetime, nearly maintenance-free, dry and contact-free operating principle Flexible Vacuum or overpressure ...

Flow: 175, 140 m³/h
Operating pressure: 130, 120 mbar
Nominal power: 0.83, 0.7 kW

The Smooth-Running Vacuum and Overpressure Generator Reliable Robust and light-weight construction, effective air cooling, long lifetime, nearly maintenance-free, dry and contact-free operating principle Flexible Vacuum or overpressure ...

Flow: 1 m³/min - 148 m³/min
Operating pressure: 9,800 Pa - 58,800 Pa

The RS-series rotary air blowers are equipped with a 3-lobe rotor. These blowers have helical structure at the intake and the outlet. This makes the air virtually pass through a gradually closing suction ...

Flow: 500 l/min
Operating pressure: 3,000 Pa
Nominal power: 2,700 W - 3,400,000 W

High-performance – ergonomic – flexible Ideal for: Shrinking Drying Soldering Heating Activating Bending Continuous temperature setting to 650°C. High-performance with ergonomic grip, for differing applications and extensive ...

Flow: min 1.3 m³/min
Operating pressure: 15,000 Pa - 20,000 Pa
Nominal power: 0.55 kW - 0.65 kW

... high-pressure blower: Low noise level Maintenance-free Compact design Completely oil-free The operating temperature of the high-pressure blower may not exceed 60°C. Specail version also available ...

Flow: 5 m³/min - 6 m³/min
Operating pressure: 1,000 Pa - 1,600 Pa
Nominal power: 0.08 kW - 0.14 kW

... temperature of the standard medium-pressure blower may not exceed 80°C. Special Version are heat resistand up to 180°C or 230°C Special version also available with UL certification On request, the blowers ...

Flow: 5 l/min - 298 l/min
Operating pressure: 5,300 Pa
Nominal power: 36 W

Maximum continuous operation state - Unit - Data Rated current - A - 1.5 No-load speed - rpm - 37000 Rotation speed at maximum wind pressure - rpm - 42000 Maximum flow (wind pressure = 0) - L/min - 298 Speed at maximum flow - rpm - 37500

Flow: 5 l/min - 300 l/min
Operating pressure: 5,200 Pa
Nominal power: 40.8 W

Maximum continuous operation state - Unit - Data Rated current - A - 1.7 No-load speed - rpm - 37000 Maximum wind pressure (flow = 0) - kpa - 5.2 Rotation speed at maximum wind pressure - rpm - 42500 Speed at maximum flow - rpm - 38500

Flow: 12 l/min - 293 l/min
Operating pressure: 7,500 Pa
Nominal power: 57.6 W

Maximum continuous operating state - Unit - Data Rate current - A - 4.8 Free blowing speed - rpm - 38600 Max air pressure (Flow=0) - kpa - 7.5 Power @maximum pressure - W - 20.4 Speed @maximum pressure - rpm ...

Flow: 1.13 m³/min - 16.06 m³/min
Operating pressure: 10,000 Pa - 60,000 Pa
Nominal power: 0.75 kW - 90 kW

... the best energy saving! Comparison with SSR Series: Saving more than 30% as maximum, 10% as average in each model.Rotary blower transfer the gas into the cavities between casing and impeller. There is some backflow ...

Special Gas Roots Blower talks about its Description: RR series Roots type blowers are designed and produced with the advanced technology from Takio KIKAI INDUSTRIES CO.,LTD of Japan. Special Gas Roots ...

Flow: 20 m³/min - 800 m³/min
Operating pressure: 19,600 Pa - 98,000 Pa
Nominal power: 11 kW - 1,800 kW

... the blower performance and improve the stage efficiency to above 78%. 　　Applying 3D Flow Impellers to some models of C blowers. 　　Applying strict dynamic balance to get low vibration, low noise, and ...

Flow: 1,010 m³/h
Operating pressure: 13,070 Pa
Nominal power: 2.2 kW

Type: Plus centrifugal ventilator Applications: clean, dry Green Blow is the new FM centrifugal blower that can be used in many industrial sectors when it is necessary to cool, clean ...

Flow: 660 m³/h
Operating pressure: 1,300 Pa
Nominal power: 0.37 kW

Type: Standard centrifugal blower Applications: cooling, drying, cleaning Green Blow is the new FM centrifugal blower that can be used in many industrial sectors ...

Flow: 810 m³/h
Operating pressure: 1,990 Pa
Nominal power: 0.37 kW

Type: Standard centrifugal ventilator Applications: cool, clean, dry Green Blow is the new FM centrifugal blower that can be used in many industrial sectors when it is necessary ...

... of four compact turbo blowers Models: 3.5kW, 4kW, 5.5kW and 7.5kW - Performance: Flow rates up to 12.5m³/min (750m3/hr), operating at speeds of 80,000 RPM. - Energy Efficiency: Over 50% energy savings versus traditional ...

Flow: 2,220 m³/h
Operating pressure: 0.15 bar - 1 bar
Nominal power: 37, 25 kW

... Jet Blower Series: - Models: 25kW and 37kW - Performance: Max flow rates of 25 m³/min to 37 m³/min, and a consistent max speed of 100,000 RPM. - Enhanced Efficiency: Up to 20% more energy efficiency compared to industry-standard ...

Flow: 0 m³/h - 150 m³/h
Nominal power: 30 W
Weight: 3.3 kg

The IF-01 ionizing fan has been designed to break down antistatic charges very quickly and bring the balance to +/- 3V. Its emitters are connected via high voltage resistors and encapsulated with epoxy resin to have the ...

The ionizing rotating jet IRJ-120 with compressed air has a double function; to clean the affected surface and to remove the electrostatic charges. Our highly effective ionizing rotating jet guarantees the complete coverage of the surface ...

The rotary ionizing jet IRJ-170 with compressed air has a double function, to clean the affected surface and at the same time eliminate the electrostatic charges present. The rotating ionizing jet guarantees complete coverage of the area ...

Flow: 550 m³/h
Operating pressure: 300 mbar
Nominal power: 6.3 kW

Premium side channel blowers are powered by Siemens IE3 motors, featuring the highest possible energy efficiency. They are the most reliable and durable blowers on the market and are granted 20.000 hours ...

Flow: 1,090 m³/h
Operating pressure: 270 mbar
Nominal power: 12.6 kW

Premium side channel blowers are powered by Siemens IE3 motors, featuring the highest possible energy efficiency. They are the most reliable and durable blowers on the market and are granted 20.000 hours ...

Flow: 510 m³/h
Operating pressure: 280 mbar
Nominal power: 5.5 kW

The Standard blowers offer an economical alternative compared to premium blowers. The energy efficiency is lower as well as the overall performance which is 10% less. Although, if price matters, standard ...

Flow: 20 l/min - 60 l/min
Operating pressure: 30 mbar - 150 mbar
Nominal power: 26 W

Pressure Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation. Applications • Fuel cell system

Flow: 0 l/min - 4 l/min
Operating pressure: 50 mbar - 200 mbar
Nominal power: 5.5 W

Pressure Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation Applications • Fuel cell system

Flow: 0 l/min - 4 l/min
Operating pressure: 50 mbar - 250 mbar
Nominal power: 4 W

Pressure Type Built-in use *No power plug included because it is designed for built-in use. *Rubber-made legs are sharp-pointed. Not for self-standing installation Applications • Fuel cell system

Flow: 48 m³/h
Operating pressure: 195 mbar
Nominal power: 0.41 kW

... VARIAIR frequency inverter that offers high performance with 100% free of oil and contact during operation. These side channel blowers are low-maintenance, highly efficient, and require only minimal maintenance. ...

Flow: 1,570 m³/h
Operating pressure: -290 mbar
Nominal power: 11 kW - 22 kW

Radial vacuum pumps Becker VATP 1600 is a turbo dynamic pump designed for delivering high volume flow. The flow of the radial blower can be precisely adapted to customer requirements ...

Flow: 1,570 m³/h
Operating pressure: -290 mbar
Nominal power: 11.3 kW

RADIAL VACUUM PUMPS Becker VARIAIR RV 2.1944/10 is a turbo dynamic pump designed for delivering high volume flow. The flow of the radial blower can be precisely adapted to customer requirements ...

Flow: 2.4 m³/min - 4.2 m³/min
Operating pressure: 150 mbar - 220 mbar
Nominal power: 0.8 kW - 1.75 kW

Flow: 460 l/min
Operating pressure: 4,500 Pa
Nominal power: 32 W

Micronel AG has expanded the U51 blower series with the "U51DL-Integrated." It is 8mm larger than a golf ball and its miniature blower (θ50mm) reaches static pressures exceeding 4,800Pa, and free blows ...

Flow: 500 l/min
Operating pressure: 5,400 Pa
Nominal power: min 41.0 W

The U51DL-4 series is a radial blower manufactured by Micronel. This compact blower can be used in medical applications. Its housing is made of the PC material with its impeller of PA ...

Flow: 440 l/min
Operating pressure: 5,000 Pa
Nominal power: 41 W

The Radial Blower of the U51DX Series is specifically designed with a brushless three-phase motor with hall sensors. It is built without an integrated motor controller and requires an external driver. ...