- Hydraulics - Pneumatics >
- Pump >
- Centrifugal pump
Centrifugal pumps
Flow: 10 l/min - 150 l/min
Pressure: 7 bar
Head: 15 m - 62 m
Self-priming horizontal multistage stainless steel pump suitable for domestic use, also in combination with autoclave tanks. Suitable for irrigation, drinking water or glycol distribution, water treatment, heating and ...
Pentax Pumps
Flow: 0 us gal/h - 137 us gal/h
Head: 0 in - 22 in
Fluid temperature: 140, 160 °F
Designed for removal of condensate from air conditioning, refrigeration, and dehumidification equipment installed in air-handling and plenum applications having limited space. The LCU-PR meets UL Standard 2043 for plenum applications. Features Plenum ...
Liberty Pumps
Flow: 9 m³/h - 2,500 m³/h
Head: 12 m - 465 m
Power: 7.5 kW - 410 kW
... has simple structure with motor and pump integrated, easy to install, maintain or disassemble, covers little floor space. It works safely and reliably, causes no pollution to water source. QJ Deep Well Submersible Pump ...
Shanghai Weihu Pump Industry
Flow: 5, 3 m³/h
Pressure: 10 bar
Head: 14 m - 80.5 m
... reservoir and wells COMPACT CLOSE-COUPLED DESIGN ◘ Easy installation: the single-phase version have internal capacitor and thermic motor-protection thus is not necessary to connect the electric pump ...
Franklin Electric
Flow: 3, 1.5, 4 m³/h
Pressure: 20 bar - 124 bar
Power: 1, 5, 1.5, 0.5 ch
The EL series of pumps are low volume medium pressure hydrostatic test pumps designed for testing fire sprinkler systems, small diameter pipes and complete installations. Key Features Adjustable ...
Flow: 4 m³/h - 400 m³/h
Pressure: 1.6 MPa
Head: 20 m - 125 m
... with a high specific gravity. The YQMPS type pump is a YONJOU standard pump for all the applications listed. The YQMPS type pump can be customized with a heating cavity (heating ...
Zhejiang Yonjou Technology Co., Ltd.
Flow: 9 us gal/min - 215 us gal/min
Head: 15 m - 92 m
Power: 0.08 ch - 5 ch
The T-Mag AM Series Mag Drive Pump consists of three sizes of a Mag Drive Pump, the 1/12, 1/4 and 1/3 HP. The fractional sizes are for low flow applications looking for a compact and ...
Flow: 3.2, 3.7, 4.3 m³/h
Power: 0.37, 0.55, 0.75 kW
... Waiter Pumps Suction lift up to 9m with foot valve. - Maximum operating pressure: 8 bar. - Maximum ambient temperature: +40℃ . - Liquid temperature up to +60℃. - Maximum altitude +1000m. Introduction Selfpriming ...
FUDING BROTHERS POWER COMPANY
Flow: 93, 74 l/min
Head: 11, 26 m
Power: 640 W
... galvanic industry beside JP-280. This handy, very robust and powerful motor can be used to drive the suction tubes of drum pumps. In this combination it is suitable for many thin liquid and slightly viscous, neutral, ...
Dr. Jessberger GmbH
DFEG-High Efficient inline circulating pump(Basic type)
Shanghai East Pump (Group) Co., Ltd
Flow: 0.5 m³/h - 80 m³/h
Pressure: 12 bar
Head: 4 m - 240 m
CDM(F)E sériés vertical multistage intelligent variable frequency pump (Hereafter as CDME/CDMFE sériés or pump) is equipped with intelligent variable frequency controller. It can realize constant pressure, ...
Nanfang Pump joint stock limited company
Flow: 7 m³/h - 342 m³/h
Pressure: 6 bar - 24 bar
Inexpensive pumps for large flow rates The ED series is the first choice for applications with normal demands on energy efficiency, wear protection and high flow rates. The ED series is a further development of ...
Flow: 2.5 l/min
Pressure: 6,000 bar
Power: 27 kW
... is the innovative High Efficiency (90%) 100% ELECTRIC Servo Intensifier Pump able to generate a pressure up to 6.000 Bar. The Numerical Control synchronizes the working pump cycles of the double ...
Waterjet Corporation s.r.l.
Flow: 1.3 m³/min - 2.1 m³/min
Pressure: 43.4 MPa - 98.8 MPa
... (AMS) controls the density accurately, leading the slurry mixing technology of the industry; Seamless switching between MANUAL and AUTO control modes changes the operation habits of customers and improves working efficiency, ...
Yantai Jereh
Power: 17.6 kW
Length: 1,130 mm
Width: 740 mm
... rate, high-quality seals and an automatic low-oil shut-off system. All of our ENDRESS motorised pumps are self-feeding suction pumps based on the centrifugal pump principle ...
Flow: max 1200.0 us gal/min
Pressure: max 8.0 bar
Head: 310'00"
QC Series Centrifugal pumps are built and designed in compliance with 3A Standards, with the following characteristics: Open Impeller Volute casing with central suction Fittings: Clamp (standard), ...
Q-Pumps
Power: 0.55 kW - 1.5 kW
Input diameter: 50, 34, 40 mm
Our centrifugal milk pumps are built entirely in AISI 304L stainless steel, and electropolished. Made entirely within the company, they have only certified made in Italy finishing accessories. This ...
... Wireless Rechargeable Water Dispenser -Model: AP-006 -Pure ABS -The battery is 1200 mah -Dimension: 14*7cm -Automatic water pump -Packing size: 56.5*39.5*32.8 cm (60pcs/CTN)
Ningbo Jewin Electrical Appliances Co., Ltd.
Flow: 66 l/min
Pressure: 1.5 bar - 2.8 bar
Head: 34, 45, 53 m
Self-priming centrifugal multi-stage pump For pumping rainwater out of storage tanks Rubber feet to suppress pump vibration and noises Integrated stainless-steel dirt trap Suction ...
Flow: max 240.0 m³/h
Head: max 130.0 m
Power: 0.75 kW - 45 kW
Centrifugal pumps of the TP series GEA Tuchenhagen®-VARIFLOW have been developed in order to meet today`s requirements of cleanability, gentle product handling, efficiency and easy maintenance. The ...
GEA Tuchenhagen
... could reach 300 m³/hr Maximum Total Solid content allowed could reach 10% Structural design for M-Ovas® series Grinding Pump: 1,Cavity The housing is equipped with a sandstone settling chamber in accordance with ...
Hunan Along New Energy Technologies Co., Ltd.
... multitude of pumping duties. Pump features include: Dri-prime automatic self-priming 50 cfm pump capable of a 6m suction lift Spark arrestor Chalwyn valve Battery isolator Overpressure switch ...
Pressure: 7 bar
Compact High flow Can be mounted in any position Zero pressure drop in any position Unique inline design Compatible with B100 bio-diesel
Flow: 1 m³/h - 66 m³/h
Head: 3.5 m - 114 m
Power: 0.37 kW - 9.2 kW
... with pump casing and lanter bracket in cast iron. B-NM, B-NMD: version with pump casing and lanter bracket in bronze (the pumps are supplied fully painted). Applications - For clean ...
Calpeda
The TOP-FLO® TF-C100 centrifugal pump is ideal for use in small and medium size process applications in the dairy, food, beverage, pharmaceutical and other sanitary process industries.
Top Line Process Equipment Company
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining