Chemical pumps

Flow: 3 l/min - 56.8 l/min

HYDREX HYDRAULIC PAINT PUMPS HYDREX High performance fluid pumps are available in six models serving the construction and road marking industry. HYDREX robust hydraulic fluid pumps ...

Flow: 2,000 m³/h
Pressure: 2.5 MPa
Head: 35 m - 603 m

Sanlian AY/ASP5080 type oil pump is improved and developed based on the original Y type oil pump.The pump absorbs the advantages from the same products home and abroad,and it has the ...

Flow: 7 m³/h
Head: 7.5 m
Power: 130, 300 W

... additional shaft seal horizontal pressure outlet 1 ¼” MPT version 'A' with mounted float switch version 'KS' with mounted compact float switch (fits into pipes with an inner diameter larger than 250 mm) protection ...

... electronic industry, coating of conductive paint on solar panel, and laboratory chemicals; Precise injection, extraction, mixing and matching of medical agents Pump type: single head long lead, ...

Flow: 3 l/min - 360 l/min

Gear pump Type ZD with suction hose and rinsing valve. Pump can be used as discharge pump by reversing motor. Capacity 3 - 360 l/min Suction hight 2-3 m, pressure hight ...

Flow: 0 l/min - 0.38 l/min
Power: 20 W
Fluid temperature: 0 °C - 40 °C

is the upgraded model of BT100-2J pump. It is more relaible and stable with quality improvement. It meets the EU electromagnetic compatibility requirements and certified by TUV. Applications： Suitable for laboratorial ...

Flow: 681 m³/h - 1,703 m³/h
Head: 23 m - 125 m

The Magnum XP pump is single-stage, single-suction centrifugal mud pump. It is suitable for handling big capacity of abrasive, corrosive and plain tough slurries. The small footprint ...

Flow: 3.62 l/min
Pressure: 830 bar

The chemical reagent injection system can be used to inject special chemical reagents into the blocked production wellhead to unblock the production wellhead. The device uses compressed air as the driving ...

Pressure: 1,500, 107 psi

The Air Assist Airless pump from C.A.T. is an all stainless 14:1 ratio pump for production fine finish spraying of wood or other fine finish applications. The new 14:1 Peak Performance Series pump ...

Flow: 0.01 l/min - 2.4 l/min
Fluid temperature: 5 °C - 45 °C
Length: 275 mm

Smart pump • Multipurpose peristaltic pump • 2 versions: max. 800 ml/min - 2.4 l/min • Stainless steel housing • iP64 splash water protected • Low pulsation by 10-roller pump head • ...

Flow: 15, 11, 6 us gal/min
Pressure: 307, 207, 172 Pa
Weight: 14.8, 17.2, 15.9 kg

The Muncie Power S Series hoist pump was designed specifically for use on small single or tandem axle dump trucks. The S Series hoist pump features a roller bearing design and can ...

Flow: 40 l/min
Pressure: 0 bar - 7 bar

Twin Double Membrane Pump. Painting equipment for high productions. It has been designed and manufactured focusing on the needs of several trades: from small metal, plastic and wood-working factories ...

Flow: 4,500 us gal/min
Pressure: 150 psi - 300 psi
Head: 650'00"

... end-suction pump, OH1 with open impeller and back-pull-out design. Shaft sealing by mechanical seal or gland packing. Selection of the most suitable materials according to the fluid to be pumped. Dimensions according ...

Flow: 3 m³/h - 1,680 m³/h
Head: 4 m - 152 m
Power: 0.37 kW - 350 kW

• The pump shall be designed for clear, clean liquids which are non-aggressive to the wetted parts and non-explosive, without any solids or fibers • Water supply • Pressure boosting for high rise buildings, hotels ...

Flow: 5, 10.5 l/min
Power: 0.06 kW

- Working Pressure: 1 - 5 Kg/cm - Max. painting pressure: 5 Kg/cm - Max. pump speed: 160 times/min. - Air consumption: 11.5 CFM - Free speed: (1:1) 5 200 RPM - Agitation shaft: 8 mm - Proppeler: 60 mm -Diameter of ring: 318 mm

Flow: 2 m³/h - 75 m³/h
Pressure: 4.5 bar
Fluid temperature: 100 °C

progressive cavity pumps are used to transfer products of low and high viscosity as well as products containing soſt particles. These food-grade progressice cavity pumps are also recommended for use ...

... mode. Control is easy because all operations are automated. It operates normally in atmospheric pressure state. Emergency manual operation is available . (needs not by-pass line) Body:SCS13A, Ball:Durability is good ...

Flow: 0 m³/h - 200 m³/h
Pressure: 24 bar
Fluid temperature: 100 °C

Food-safe pumps with a large suction chamber. Made in polished AISI 304 and/or 316 stainless steel for transferring products of low/medium viscosity.

Pneumatic dosing pump made of stainless steel AISI 316 for doling out chemicals and fluids Main Features Stainless-steel in AISI316 (1.4408) Double- and single-acting versions Seals in PTFE and ...

Flow: 0.018 l/min
Power: 70 W

Our peristaltic pumps are used in all fields of analytical and preparative chemistry and in production operations. In particular, they are used in instrumental analysis, biotechnology, bioanalysis, ...

Flow: 1,500 l/min
Power: 65 W

... FEATURES Small foot print, bench top. Silent and free from vibrations. Pump tube held by a simple clamp Glass dosing tip “PECIPUMP” provides precise dispensing. Dispense rate: The pump ...

Flow: 0 us gal/min - 110 us gal/min
Head: 0'00" ft - 20'00"
Power: 0.03 ch

For neutralization and removal of acidic condensate produced by high-efficiency combustion equipment. When not neutralized, acidic condensate has the potential to harm the environment and any plumbing it comes in contact with due to its ...

Flow: 10 m³/h - 1,300 m³/h
Head: 7 m - 40 m
Power: 15 kW - 75 kW

... well. It can be used to pump water water containing alkali or acid, such as waste water from building, chemical plant, food factory or sea water treatment. WQ stainless steel sewage pump ...

Flow: 75, 160, 210, 245, 280 l/h
Head: 1, 2, 3, 4, 4.8 m
Power: 60 W

... condensing furnace and condensing boiler equipment. ■ External test/run lever ■ Slim footprint ■ Vertical centrifugal pump design ■ Stainless steel motor shaft ■ Automatic start and stop operation ■ Galvanized ...

Flow: 100 m³/h - 280 m³/h
Power: 3 kW - 37 kW
Fluid temperature: 80 °C

... made this pump the standard in the industry. The combination of different sized pumps, impeller trims and speed variations ensure that the correct capacity pump will be matched to the ...