Chemical pumps

Flow: 0.03 l/min - 0.3 l/min
Pressure: 0.17 MPa
Power: 3 W

Are you in search of a reliable peristaltic pump brand? LEFOO peristaltic pump is the right option. As a professional peristaltic pump manufacturer. LEFOO group retains a pump ...

Flow: 0.0005 l/min - 0.008 l/min
Pressure: 0.03 MPa
Fluid temperature: 0 °C - 60 °C

LEFOO DC Motor Peristaltic pump LFP101A/DB is a device for chemical fluid dosing or visible fluid transfer. The robust plastic housing the tube, roller, brushless motor, and bearing. For peristaltic pumps ...

Flow: 6.6 l/h
Pressure: 0.17 MPa
Power: 5 kW

LEFOO DC Motor Peristaltic pump LFP102/DB is a device for chemical fluid dosing or visible fluid transfer. The robust plastic housing the tube, roller, brushless motor, and bearing. For peristaltic pumps ...

Flow: 100 l/min
Pressure: 1.5 bar - 8 bar
Head: 7, 4.5 m

... This model is a fully groundable ATEX certified pump, for use in potentially explosive atmospheres (Ex II2 GD IIB/IIC 95 °C). This pump is good for chemicals compatible with stainless ...

Flow: 26.5 l/min - 1,000 l/min
Pressure: 1.5 bar - 8 bar
Head: 8 m

... advantages of our PIVOT Series AODD pumps are: • Air motor with exclusive frictionless pivot-shaft air valve resulting in: o Larger flow delivery o Smooth pump operation o Reduced flow pulsation ...

Flow: 31 l/min
Pressure: 1.5 bar - 7 bar
Head: 3 m - 7 m

... wide range of applications and fluid compatibility. These pumps are very suitable for aggressive chemicals with the presence of abrasives. UP03 3/8” AODD pumps make the difference ...

Flow: 0 m³/h - 250 m³/h
Pressure: 0.8, 0.5, 16 bar
Fluid temperature: 250 °C

The HD gear pump are specifically designed for difficult applications Heavy Duty - Internal gear pumps in cast iron, for a wide range of viscous, non-corrosive liquids. HD pumps ...

Flow: 0 m³/h - 90 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... coupled internal gear pump for ultimate protection against leakage ED is for Environmental Duty. As only minimal maintenance is necessary, ED pumps will be a very economical solution compared with ...

Flow: 0 m³/h - 250 m³/h
Pressure: 16, 0.5, 0.8 bar
Fluid temperature: 250 °C

... gear pump designed to handle corrosive liquids ROTAN® CD - Chemical Duty. Internal gear pumps in stainless steel, designed to handle corrosive liquids. CD pumps ...

Flow: 0.24 l/min - 8.2 l/min
Pressure: 15.5 bar - 517 bar
Power: 0.33 ch

... 125 psi (1.8 to 9 bar) • Pressures to 25000 psi (1724 bar) • All Hydraulic fluids, water (plain or DI), solvents, mild chemicals, liquefied gases

Flow: 0.6 l/min - 6.55 l/min
Pressure: 48 bar - 517 bar
Power: 0.75 ch

Key Features • One model available in 9 ratios • Output pressures to 15000 psi (1034 bar) • Flows to 1.5 gpm (5.7 l/min) • Choice of wetted materials • Single air head • Drive pressure 3 psi to 100 psi (.2 to 7 bar)

Flow: 0.15 l/min - 13.1 l/min
Pressure: 28 bar - 1,103 bar
Power: 2 ch

... pressure 3 to 100 psi (.2 to 7 bar) When using high pressure ratio pumps the reliability of the XH models (-452 through -1373) will be improved with an air driven supercharge pump, not only to simplify ...

Pressure: 0 bar - 0.772 bar

... tubing life. Each pump comprises a front panel with controls, a pump head, a safety cover, a motor, a rigid case with four rubber feet, and a handle. The handle is practical both to carry the pump ...

Pressure: 0 bar - 0.848 bar
Input diameter: 0.25 in - 0.5 in
Length: 165 mm

Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical Compact design for ...

Flow: 0 l/min - 1.3 l/min
Pressure: 0 bar - 0.869 bar
Input diameter: 0.25 in - 0.5 in

Variable speed peristaltic pump designed to handle liquids of low to high viscosity. Ideal for laboratory, processing, and OEM applications. Design Features Economical Compact design for ...

Flow: 112 l/min
Pressure: 1,500 bar
Power: 147 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 133 l/min
Pressure: 1,500 bar
Power: 175 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 319 l/min
Pressure: 1,500 bar
Power: 236 kW

... Z-series is a second shaft end which allows another pump to be connected and can double the performance if required. All gearboxes of WOMA pumps have an integral oil cooling system. Additionally, all ...

Flow: 17, 9, 13, 6 l/min
Pressure: 35 bar
Power: 1.5, 0.75, 1.1, 0.55 kW

Gear pumps from 6 to 17 litres flow rate and a maximum pumping pressure of 35 bar. This pump is designed for a base mount. ADVANTAGES - Economical through closed circuit - Environmentally friendly - ...

Flow: 0.01 l/min - 16.64 l/min
Pressure: 0 bar - 200 bar
Power: 0.02 kW - 2.53 kW

ZPD external gear dosing pump Our most flexible line of external gear pumps, the ZPD has been used in countless applications the world over. Various modifications can be optimised customer-specific to ...

Flow: 0 l/min - 5.2 l/min
Pressure: 0 bar - 200 bar
Fluid temperature: -20 °C - 150 °C

ZPDA external gear pump ZPDA pumps are specifically designed for start-stop dosings. The low pulsation gear design provides constant flow with very rapid pressure build-up. Internal clearances based ...

Flow: 0 l/min - 1.2 l/min
Pressure: 0 bar - 150 bar
Fluid temperature: -20 °C - 150 °C

External gear pump DARTec® The DARTec® gear pump was specifically designed for high precision dosing of thermally reactive fluids. Its protected sealed needle bearing system eliminates material contact ...

Flow: 4 m³/h - 150 m³/h
Pressure: 24, 18 bar

NEMO® progressing cavity pumps in the FSIP® (Full Service in Place) design allow you to save up to 66 percent on servicing time. Available in three variants, these pumps are versatile and can be utilized ...

Flow: 0.0024 m³/h - 300 m³/h
Pressure: 8, 24, 12, 18 bar

The NEMO® BY block pump, with its industrial design, is versatile and can be applied in environmental technology, the food and chemical industries, as well as in the oil & gas sector, both upstream and ...

Flow: 0.003 m³/h - 350 m³/h
Pressure: 72, 60, 48, 36, 24 bar

... ® SY progressing cavity pumps are employed in challenging applications for continuous, pressure-stable, gentle, and low-pulsation conveyance, as well as speed-proportional dosing, in almost every industry worldwide. These ...

Flow: 6.5 m³/h - 70 m³/h
Pressure: 10, 7 bar
Fluid temperature: 100 °C

Seal-Less Eccentric Disc Pumps are designed to provide premium performance and the ultimate in full containment and safety in chemical-processing and industrial applications, delivering high suction vacuum ...

Flow: 6.5 m³/h - 70 m³/h
Pressure: 10 bar
Fluid temperature: 100 °C

... Eccentric Disc Pumps have been designed for use in a wide range of pumping applications in the food, cosmetic and pharmaceutical industries, all of which require extremely hygienic operations. The H-FLO pump ...

Flow: 12, 30, 16, 20 m³/h
Pressure: 3.5 bar
Power: 1.1, 1.5, 1.8 kW

Tank Truck Eccentric Disc Pumps is a polyvalent heavy duty pump able to cover a wide range of applications. Depending on the construction, it can handle fuels, solvents, and waste products such oil, glycol ...

Flow: 1.8 m³/h - 150 m³/h
Pressure: 10.3 bar - 34.5 bar
Fluid temperature: -40 °C - 149 °C

Pumps / Positive Displacement Pumps Universal 2 Bio-Pharmaceutical positive displacement pumps are designed for pharmaceutical and biotech processes. FEATURES 316L stainless steel ...

Flow: 1.3 m³/h - 102 m³/h
Pressure: 13.8, 10.3 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS The durable Waukesha Clean-out-of-Place (COP) Positive Displacement "Can-Do Pump". Versatile in application, its reliability has made it the industry ...

Flow: 2.5 m³/h - 102 m³/h
Pressure: 250, 200, 300, 450 bar
Fluid temperature: -40 °C - 149 °C

PUMPS / POSITIVE DISPLACEMENT PUMPS This positive displacement pump is manufactured specifically for paint re-circulation in the automotive industry. FEATURES A modification of the ...

Flow: 0 l/s
Pressure: 0 bar
Head: 0.5 m - 75 m

ZUG V VORTEX Cast iron vortex impeller Full free passage Soiled biological liquids and non-strained wastewater Suitable for civil pumping stations and lifting wastewaters in livestock farms and industrial plants

Flow: 0.5 l/s - 1,600 l/s
Head: 1 m - 100 m
Power: 3 kW - 355 kW

Channel impeller in cast iron / Large free passage Liquids containing suspended solids Suitable for sewage and drainage systems and first rainfall tanks

Flow: 0.5 l/s - 11 l/s
Head: 1 m - 61 m
Power: 4 kW - 11 kW

Cast iron multi-channel open impeller / Grinding system with rotary knife Soiled liquids containing fibres and filaments Suitable for professional and heavy-duty applications

Flow: 2.85 l/min - 25.5 l/min
Pressure: 0 bar - 3 bar

... they are used in Chemical Injection applications for high flow of chemicals such as methanol, glycol and other related chemicals. GPD pumps will handle hydraulic oil, ...

Flow: 1,020, 850 m³/h
Head: 642 m
Power: 710, 900 kW

MULTI-STAGE HORIZONTAL PUMPS One of the most complete product ranges in the sector, with over 160 different versions available. TM (end-suction), TMB (double support and side suction). For applications requiring particularly ...

Flow: 300, 330 m³/h
Head: 403, 392 m
Power: 250, 280 kW

MULTI-STAGE VERTICAL PUMPS For applications requiring particularly high pressure, multi-stage vertical centrifugal pumps are designed for lifting stations, refrigeration or heating plants, artificial ...

Flow: 0 l/s - 200 l/s
Pressure: 0 bar - 30 bar
Head: 140 m

Turo® Vortex Pumps with a completely open spherical channel. Only 15% of the pumped fluid comes into contact with the impeller. Around the world, thousands of pumps have proven themselves with decades ...

Flow: 0 l/s - 1,500 l/s
Pressure: 45, 100 bar
Head: 0 m - 150 m

... reactor pump developed for high temperature and high pressure applications in the chemical and petrochemical industries. Since many years a reference to handle multiphase liquids such as chemical ...

Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m

The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation plants Vaporisation ...

Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW

... PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous fluids - ...

Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW

... ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely of ductile iron - Suitable for aggressive or viscous fluids - ...

Flow: 1.7 m³/s - 17.1 m³/s
Pressure: 7.6, 6.9, 3.4, 4.5 bar
Power: 0.18 kW

... predictive maintenance Several tube materials suitable for the huge majority of fluids, chemicals and applications Albin Pump KM Series cased-drive tubing pumps provide process confidence ...