Climate chambers

Length: 260 cm
Depth: 150 cm

Full Automatic Computer Controlled 960 Prism Molds 24 Steel Molds The humidity cabin with pool system is a conditioning system developed to perform both prism curing pools and the operations of the humidity panel together. The humidity ...

Capacity: 613, 1,200, 2,730 l
Temperature: -70 °C - 150 °C
Length: 1,100, 1,200, 1,500 mm

The chamber can simulate temperature, humidity and vibration simultaneously to conduct a combined test by matching up with a vibration shaker. Fast temperature changing rate with maximum mechanical refrigeration rate ...

Temperature: -100 °C - 30 °C
Length: 800 mm
Width: 510 mm

DWC Series Temperature Chamber is designed according to the standard of 'Charpy Notch Impact Test Method for Metal Materials' and adopts compressor cooling technology, which is made up of two sections (Low temperature ...

Capacity: 100 l - 200 l

... Humidity Cabinets are designed to reproduce test conditions of high humidity at constant or cycling temperatures. The test chamber environment is created by water being heated to precise temperatures to generate water ...

Temperature: -70 °C - 150 °C
Length: 500, 600, 1,000 mm
Width: 750, 850, 1,000 mm

ISO Factory Provide Combined Environmental Test Chamber For Environment Simulation Introduction The Integrated Environmental Test System is a combination of test chamber and vibration test system,whereby ...

Capacity: 50, 100, 150 l
Temperature: -10 °C - 150 °C

Climatic desktop chamber for thermal tests of Ineltec has been designed to perform temperature tests ( cool - heat) on samples of reduced size. Touch screen Observation windows 50mm access hole WIFI / ETHERNET / ...

Capacity: 150 l - 3,000 l
Temperature: -70 °C - 180 °C

ET-Series Environmental Test Chambers are designed with uncompromised features included in the system to meet your changing application needs of simulation of wide range of temperature, relative humidity etc., conditions ...

Capacity: 1,000 l
Temperature: -70 °C - 150 °C

The temperature cycle tester is used to simulate the ability of the battery pack/battery system/battery module/cell sample to adapt to the environment under different temperature and humidity conditions. Product features and functionality 1 ...

Capacity: 408, 800 l
Temperature: -40 °C - 150 °C
Length: 1,900, 1,950 mm

... high humidity or moisture condensation test) by simulatable products, low humidity and constant temperature-humidity test chamber can also test whether the crazing and breakage of the product would happen under the conditions ...

The 519 FA Humidity cabinet from Erichsen are fitted with an additonal PLC for applications that are concerned with manual heating controls, acid feeding and draining, water filling and draining, and air draining and filling. The automatic ...

Temperature: -1 °C - 20 °C

For mortar prisms in three-gang moulds and cubes EN 196-1, ASTM C109 Made of stainless steel Electronic adjustable control for temperature and humidity 6 telescopic cabinet racks Technical data Curing temperature: +20°C +/- 1°C Humidity: ...

High and Low Temperature Humidity Chamber is according to IEC60068-2-1 (GB/T2423.1) and IEC60068-2-2 (GB/T2423.2), IEC60068-2-78, IEC60598-1, GB/T2423.17, GB/T5170.2, GB/T5170.5. The climate chamber ...

... temperature:120℃, relative humidity:85%), and evaluates the light output degradation in a short period. A combination of the HAST chamber and LED life evaluation system enables the highly accelerated life evaluation of ...

The ETM Series by Wance provides different types of environmental chambers for addressing the demands of non-ambient tensile, compression and bending tests. The GDW200 is especially manufactured for ETM Type B and C series, ...

Temperature: 40 °C - 70 °C

... water vapor generator controls chamber humidification by injecting saturated water vapor into the recirculating air duct. This process is preferable to steam generation because steam introduces additional heat to the ...

Capacity: 708 l
Temperature: 5 °C - 70 °C

The 6020 series is a humidity and temperature test chamber developed by Caron. It is mainly used for ultra-reliable stability testing. The unit features accuracy, depedability, and ease of use. It is assemble with accordance ...

Temperature: -70 °C - 200 °C

... Vertical-down airflow assures consistent conditions Temperature alarm and shutdown circuit for additional protection against chamber and product over/under temperature Features Vapor-tight interior liners of ...

... environmental chambers are designed for use with Thwing-Albert Vantage Series single or dual-column testing machines. A climate controlled environmental chamber can be configured for ...

... is ideal for reliability growth processes where temperature changing rate of 5 Degrees a minute are required. All of the chambers in the “ES” range are equipped with air condensers, except for the 340 l model ...

Temperature: -70 °C - 180 °C

... RH Chamber size: 4 cubic feet Fully programmable with Watlow F4 controller The four cubic foot workspace is the largest to be found in a benchtop unit, while requiring less footprint than even smaller comparable ...

The T line of products from CTS are fitted with a multicolor touch panel and an RS 232 interface. Their handles are lockable units that are single handedly operated, and their displays show errors in plain text. Their shelves are forged ...

Temperature: -30 °C - 45 °C
Length: 9 m
Width: 3,500 mm

... sheet (PDF, 980 ko) GREENMOT developed and has operated since 2011, an innovative automotive climatic test cell. This test cell has been designed to provide OEMs and Tier 1 suppliers, large and highly repeatable testing ...

Capacity: 1 m³
Temperature: 15 °C - 40 °C
Length: 1,460 mm

1 cubic formaldehyde climate box / LT-JJ39 formaldehyde climatic chamber The product description This machine is suitable for the determination of formaldehyde emission of various wood-based panels, ...

Temperature: -40 °C - 150 °C

Our ISN Series climatic test chambers are creates multi functional testing environment by adjusting temperature between -40°C to +150°C and setting humidity between 10%-99% DETAIL™ climatic test chamber ...

Capacity: 33 ft³
Temperature: 2 °C - 70 °C
Length: 40 in

... demanding requirements, our chambers are trusted by pharmaceutical, automotive, and cosmetic industries to test the resilience of product samples under controlled temperature and humidity conditions. SP Hotpack’s ...