Column type presses

Force: 1,000, 3,000, 2,000 kN
Rate (strokes/min): 150 p/min - 400 p/min
Stroke: 1,200, 1,300, 1,500 mm

... tilting-table - mighty fast and quiet! In the last few years, die casting has developed rapidly - this means that the trimming press in the cell is becoming increasingly important. While in the past the die casting process ...

Force: 3,000, 1,000, 2,000, 500 kN
Rate (strokes/min): 150 p/min - 400 p/min
Stroke: 1,500 mm

... and parts with large volume • Loading and removal possibilities from four sides • Robust, strongly dimensioned guiding columns • All possibilites of flash removal by variable space beneath base platen • Ideal flash ...

... numerous customers around the world deposit their trust in our 4-post hydraulic presses. PH4C Series | Four Columns Hydraulic Press: - 4 columns construction; - All sides tooling ...

Force: 300 kN
Stroke: 450 mm
Table width: 1,000 mm

This 300 ton 4-column press is manufactured with 4 cylindrical columns to ensure a perfect parallelism of the upper table. We recommend this type of hydraulic press ...

Force: 50 tf
Stroke: 450 mm
Table width: 620 mm

This 50 ton 4 column hydraulic press is manufactured with 4 cylindrical columns to ensure a perfect parallelism of the upper table. We recommend this type of hydraulic ...

Force: 100 kN
Stroke: 450 mm
Table width: 950 mm

This 100 ton four column press is manufactured with 4 cylindrical columns to ensure a perfect parallelism of the upper table. We recommend this type of hydraulic press ...

Force: 0.5 kN - 120 kN
Opening: 66 mm - 220 mm
Stroke: 80 mm - 400 mm

Unit Type Higher Speed, Greater Precision, Enhanced Interfacing Next Generation Servo Press Easy Installation Ethernet port included as standard equipment Choose from 6 different Field Network types Low ...

Force: 1,992.8 kN
Opening: 900 mm

Power (tons) - 200 Columns Ø (mm) - 100 Lower and upper plate (mm) - 1500x1300 Engine power (HP) - 20 Approximation speed (mm/s) - 130

Force: 797.1 kN
Opening: 1,300 mm

Press MECAMAQ for production in the sector of the car, It has a power of 80 Tm. Dimensions of tables between columns of 1.400 x 1.400 mm, with an opening of 1.700 mm, and course of the top table of 500 ...

Opening: 1,500 mm
Stroke: 1,100 mm
Max. pressure: 310 bar

... cylinders for the fast speed. Upper and lower plates dimensions 1.400 x 1.400 mm. Upper plate guided by means of 4 cylindrical columns Ø100 with bronze fittings. Main hydraulic system with hydraulic pump with variable ...

Force: 150, 200, 300, 400, 500 tf
Working speed: 3, 2 mm/s
Approaching speed: 20, 18 mm/s

... the workbench. The stroke of the hydraulic cylinder is 500mm and the PMM hydraulic press is available in models from 150 to 600 tons. The movement of the gantry and of the cylinder (up and down, ...

Force: 150, 70, 100, 40 tf
Stroke: 500 mm
Table width: 900, 1,500, 1,050 mm

Hydraulic press suitable for straightening sheet metal, assembling and dismantling electric motors and more generally for any assembly operation. The PBM hydraulic workshop press is equipped with a ...

Force: 100 tf
Opening: 500 mm
Stroke: 500 mm

H-Frame hydraulic stamping press for sheet metal deformation and assembly. The PST press is made with a monolithic frame, assembled and TIG welded with internal reinforcements. The mobile upper plane ...

Force: 0 kN - 3,200 kN
Opening: 130 mm - 2,230 mm

... main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press elements. The shift-out rail of lower mold plate adopts wear resistant rail with intensified ...

Force: 0 N - 1,200 N
Opening: 170 mm - 1,470 mm

... of configuration ensures the excellent performance of press, and all the main components for mechanical processing are manufactured by imported machining center, to ensure machining precision of press ...

Force: 0 kN - 1,200 kN
Opening: 200 mm - 1,500 mm

• - Four Column design • - Four Hydraulic Cylinders • - One-touch Operation • - Considerable Clamping Force • - Outstanding Precision • - Good Ergonomics • - Parallelism Measuring Function Why Die Spotting Press • ...

Force: 1 kN - 300 kN
Stroke: 280 mm
Working speed: 250 mm/s

... For the management of the movement and the containment of waste, they are controlled by a dedicated electronic instrument (Press-Right). A ready-to-use, safe and certified solution. The Advantages of the Electromechanical ...

Force: 850, 630, 500, 400, 250 kN
Opening: 270 mm - 330 mm
Rate (strokes/min): 70 p/min - 600 p/min

OMPSA four columns presses mod. 4CN, were developed since the half of the Sixties with specific experience on this field. They are particularly suggested for workings that use progressive dies, requiring middle and high ...

Force: 400, 450, 750 kN
Opening: 265 mm - 315 mm
Rate (strokes/min): 50 p/min - 250 p/min

Our four-column presses with double knuckle-joint mod. 2G, developed since the half of the Eighties with specific experience on this field, are specially designed for using dies for progressive pressing and coining at ...

Force: 250 kN
Weight: 1,600 kg

The OMPSA four columns presses mod. 4CL, developed since the half of the Sixties with specific experience on this field, are particularly suggested for that kind of workings that use dies of progressive working kind requiring ...

Force: 500, 400, 3,000, 2,000, 600 kN
Stroke: 300, 150 mm
Table width: 600 mm

1. Adopt the whole welded frame type fuselage, the overall rigidity is good, high compressive strength 2. The use of imported servo motor, hydraulic control system, movable table up speed, high production efficiency 3. ...

Force: 2,000, 4,000, 6,000 kN
Stroke: 650, 900, 1,200 mm
Max. pressure: 21, 22, 24 MPa

... use of advanced hydraulic system, hydraulic system failure less, high reliability and small reversing impact. 2. The four columns are made of high strength alloy steel, with hard chrome plating on the surface and good ...

Force: 650, 1,200, 1,000, 800 tf
Stroke: 500 mm
Table width: 1,300, 1,200, 1,000 mm

... according to the pressing process requirements, the table empty stroke speed is fast, high production efficiency. 3. The four columns are made of high strength material with hard chrome plating and good wear resistance. 4. ...

Force: 300 tf
Table width: 1,400 mm
Table length: 1,500 mm

Clearance between columns on operator side: 1500 mm Light between side columns: 1100 mm Fixed top height from ground: 850 mm Mould support surface dimensions: 1500 x 1400 mm Vertical clearance between ...

Force: 3,000 tf
Opening: 2,400 mm
Max. pressure: 315 bar

Ton Maximum Pull Strength: 100 Ton Maximum opening between floors: 2,400 mm Clearance between columns at the front: 3,200 mm Lateral passage between columns: 1,300 mm Dimensions of the tops: 3,200 ...

Force: 5,000, 120 tf
Opening: 2,000 mm
Stroke: 1,000 mm

MAXIMUM OPENING BETWEEN FLOORS: 2000 mm PASSAGE BETWEEN COLUMNS FRONTLY: 2400 mm PASSAGE BETWEEN COLUMNS SIDEWARDS: 1500 mm EXTRACTOR PISTONS DETACHMENT FORCE: 90 Ton/cp PIT DEPTH (BENCH FLUSH TO FLOOR): 2250 mm

Force: 50 kN - 5,000 kN
Opening: 100 mm - 1,000 mm
Stroke: 100 mm - 1,000 mm

... 30-40 mbar), floating upper platen for lower press range (1-10 kN), higher temperatures up to 700°C, cassette cooling system,… •2 column press frame: extraordinarily high parallelism ...

Force: 200 tf

... and so on. Zhengxi SMC hydraulic press, engineered with great care for details, is a high-quality machine tool. There are four-column and H-frame types for you to choose from. No ...

Force: 4,000, 800, 500 tf

... hydraulic press is a machine equipment used to process metal coffins. Usually, metal coffins are made of metal materials such as iron or steel, so certain processing techniques are required to form the shape and structure ...

Force: 10 tf - 200 tf
Stroke: 50 mm - 1,000 mm

The H-frame press is a smaller type of press, which is more convenient to carry and use. It adopts a double-column structure, which is simple, economical, and practical. ...

Force: 5 tf - 35 tf
Opening: 520 mm
Stroke: 520 mm

E-FORM X2 is the most flexible of the range. As compact as a single automation allows you to deal with large and small production series. Each working station is independent, but supervised by a single controller. The use of electric ...

Force: 5 tf - 35 tf
Opening: 0 mm - 520 mm
Table width: 500 mm - 500 mm

E-FORM X1 is an agile solution with a compact design for forming small series, excellent for prototyping. Its dimensions allow for easy placement within the production area. The silence, derived from the exclusive use of the electric ...

Force: 2,000 kN
Opening: 800 mm
Table width: 1,500 mm - 1,500 mm

... mm) the E-FORM XL1-250 pushes electric technology to reach up to 250 tonnes of force. All the advantages of an electric press with high tonnages for mass production or large parts.

Force: 100 tf - 400 tf
Opening: 400 mm - 600 mm
Stroke: 400 mm - 600 mm

These type of presses are manufactured for shaping process wıth hot molds. It provides for rubber-like materials to be placed in hot molds and to be pressed for target shapes. For the mold-forms to be faultless; setting ...

Force: 1,250 kN
Rate (strokes/min): 120 p/min
Stroke: 250 mm

The Servo Spindle Press, used as a progressive press, offers all the advantages of spindle drive technology with top-mounted motors. Specifically designed for complex processes, such as in transfer or ...

Force: 10 kN - 2,941.8 kN
Opening: 0 mm - 1,000 mm

Our polymer hot press consists of a hydraulic press with automatically operated and two heated platens. The temperatures of heated platens are controlled by PLC. Water cooling jackets are installed at ...

Force: 19.6 kN
Opening: 80 mm

The column-style ultra-sensitive press which offers a pressing capacity up to 2000 kg is suited to a wide range of applications where an excellent sensitivity is crucial. Features Pressing force adjustment ...

H Type Automatic PLC Presses for Different Tonnage and Features in our Production

Force: 600 tf

Automatic Press 4 Cylinder Special Hydraulic Press PRODUCT EXPLANATION Standart Equipments Chrome Plated Cylinder Steel Welded Frame Automatic Control Unit Safety Cover and Light Barrier Two ...

Force: 880 kN
Opening: 196 mm
Max. pressure: 250 bar

... punch, a very high speed, and the option to produce up to 3 parts per stroke. V1.32 is the more specific model for a determined type of parts, with fast die changeover and the robustness of the Neotecman models. PUNCHES ...

Force: 980 kN
Opening: 500 mm
Max. pressure: 250 bar

... by using additional cylinders to reduce weight. The H205 series is built on Neotecman’s signature double structure for both press and furnace, incorporating a robot for versatile billet positioning. This enables multiple ...

Force: 996 kN
Opening: 500 mm
Rate (strokes/min): 4,000 p/h

... weight. Moreover, Neotecman’s design is based in a double structure for press and furnace, that includes the assembly of a robot to offer a multiple billet positioning in the press, symmetric billets, ...

... The equipment supplied includes: Blanks loading area. Heating furnace. Robot for loading of the press. Hydraulic press. Robot for unloading of the press.

Force: 200, 100, 150 kN

... that can be adjusted throughout the cycle. The press can be used alone, also communicating with other devices on the line via common data bus systems. in this way it is possible to control more than one press ...