Stroke : 0 mm - 4,000 mm
Pressure: 5 bar - 250 bar
Force: 0 kN
Hydraulik cylinder with simple outline The EHZ is a hydraulic cylinder, which can be operated at an operating pressure of up to 250 bar. The EHZ standard cylinder is characterised by ...
Eckart
Stroke : 20 mm - 30 mm
... manufactured by Bansbach, is a pneumatic cylinder, has a compact design and features a disappearing piston rod. The piston rod has a measurement that ranges from 30 mm and up to 50 mm while the diameter ...
BANSBACH easylift
Stroke : 5 mm - 80 mm
Bore: 16 mm - 100 mm
CU series short stroke cylinders. According to project U.N.I.T.O.P. - RUP/7 Bores from 16 to 100mm, with magnetic piston single and double acting with end stroke elastic cushions.
Force: 190 N - 1,200 N
Speed: 15 mm/s - 90 mm/s
Ambient temperature: -10 °C - 60 °C
Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C Encoder on ...
MecVel srl
Force: 1,200 N - 2,500 N
Speed: 0.9 mm/s - 16.5 mm/s
Ambient temperature: -10 °C - 60 °C
Permanent magnet motor 12 - 24 Vdc Worm gearbox ACME lead screw Aluminum push rod (Stainless steel on request) Permanent grease lubrication IP 65 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C Encoder on ...
MecVel srl
Force: 450 N - 2,500 N
Motor power: 90, 60 W
Speed: 5 mm/s - 110 mm/s
Permanent magnet motor CE Worm gearbox Acme lead screw Chrome plated steel push rod Permanent grease lubrication IP 65, tested according to rule CEI EN 60529 Working temperature range -10°C +60°C Intermittent duty S3 30% (5 min) a 30°C* Limit ...
MecVel srl
Stroke : 10 mm - 1,200 mm
Rod diameter: 16 mm
Force: 2.55, 1.28 kN
Electric Cylinder DGREC65 is one of the economical model of cylinder; It features potentiometer position feedback which allows for positioning control in synchronized motion. The model is installed with ...
Bore: 16 mm - 125 mm
... Hydraulic Cylinder, Hydraulic Cylinder for metallurgical equipment, Hydraulic Cylinder For Industry and Thin Hydraulic Cylinder, etc. The DGR JOB series hydraulic cylinder ...
... light mechanical equipment and small engineering projects, usually composed of piston, cylinder barrel, oil seal, piston rod, connecting parts, etc. Features 1. Small size: Small ...
HIDRACAR oleo-pneumatic suspension cylinders are the ideal oleo-pneumatic suspension system for application in truck and tractor towed load trailers, tanker trailers for the transport of liquids and slurries and fumigation ...
Stroke : 32 mm - 63 mm
The round cylinder line 222 is characterized by essential design and very compact size. The products range includes bore sizes 32, 40 and 63 mm. so this completes the cylinder line 220 ...
Aircomp by Stampotecnica
Speed: 0.5 m/s
Double acting cylinders constructed in compliance with ISO 6020-2 and DIN 24554. The compact design of the square ends with tie rods plus the high quality material and seals render these cylinders ...
Stroke : 0 mm - 6,000 mm
Double acting hydraulic cylinders, realized in high resistance aluminum with wear-resistant coating. Suitable for industrial automation applications, not in heavy duty conditions, when a light, compact ...
Stroke : 38 mm - 62 mm
• Capacity from 10-100 ton. • Compact universal cylinders with return spring.
Stroke : 150, 75, 50, 30 mm
Force: 9 N - 200 N
Torque: 3.3 Nm - 30.5 Nm
The MCE series is a miniature electric table type cylinder independently developed and manufactured by DH-Robotics,with high energy density, heavy load capacity, and compact design. It ...
Stroke : 500 mm
... though compact, that can transport up to 65 kg, rod type with stroke, compact and highly rigid slide table type, compact rotary type used for rotational axes, gripper type with a wide ...
Yamaha Motor Co.,Ltd.
Stroke : 0.125 in - 16 in
Bore: 0.56 in - 4 in
Pressure: 200 psi
If your application is tight on space, a Bimba Flat-1® is the answer. With 19 recent design enhancements this compact and reliable cylinder is now “Blue and Improved” in each of the eight available bore ...
Stroke : 5 mm - 300 mm
Bore: 12 mm - 200 mm
Pressure: 7.3 psi - 145 psi
The NCQ2 compact cylinder is the inch version of the world's best selling pneumatic cylinder and can be supported globally. The NCQ2 is available in 13 bore sizes from 12mm to 160mm. ...
SMC Corporation of America
Stroke : 70, 100, 160, 260, 40 mm
Force: 3.1, 0.34, 2.1, 1.7, 0.7 kN
Torque: 0.54 Nm - 2.1 Nm
Compact and efficient The SEZ is a ready-to-install system with the rotor pressed directly onto the spindle. This means fewer interfaces, greater efficiency and more precise positioning. By integrating the spindle bearing ...
Stroke : 0.312 in
Pressure: 5,000 psi
These "Pull" cylinders retract when hydraulically pressurized. They were created to permit the user to design a cylinder into a fixture while maintaining the replaceability and long life of a heat treated, ...
... Pressure (psi) 2350 Maximum Pressure (bar) 160 Features Confirms to ISO:6020 Part II/III Choice of 18 Mounting Styles Compact Tie-Rod Design Piston and Rod Seals Options: NBR for 0-80˚C / FKM (VITON) for 0-180˚C/ V ...
Stroke : 1.6 mm - 101.6 mm
Bore: 0.5 in - 4 in
Pressure: 500, 250 psi
... strength, appearance and longevity have made us the leader in compact air cylinders. Pancake cylinders offer novel features and durable construction to ensure greater reliability. We ...
FABCO-AIR
Stroke : 40 mm - 153 mm
Pressure: 700 bar
Force: 123, 221, 308, 589, 1,037 kN
The extremely compact and robust hollow piston cylinders made of heat-treated steel are ideal for moving heavy loads or safely tensioning steel cables. With their great strength, they can handle the largest ...
LUKAS Hydraulik GmbH
Stroke : 15 mm - 350 mm
Force: 50 kN - 1,000 kN
... convenient to use with only one quick-release coupler hose connection and a spring return. Universal cylinders are designed for all jobs where high forces but compact dimensions are required: e.g. straightening ...
Stroke : 20 mm - 250 mm
Bore: 50 mm - 200 mm
Pressure: 140 bar - 215 bar
... temperatures up to 150°C. These components allow the cylinder sealing system to last over long periods of time. These hydraulic cylinders are compatible with water-glycol mixtures. The cylinder ...
VEGA SRL
Force: 70.5 daN - 62,830 daN
For long stroke, it Is necessary to equip the cylinder with a brace ring. Its length must be added to the overall di- mension of the cylinder. SWIVELS TYPE The standard swivels are of type GE... DO from ...
Stroke : 2.5, 2, 4.88, 3 in
Pressure: 9,915 psi - 10,395 psi
Force: 18, 30, 50, 100 tf
... Double-Acting Power Team cylinder, ideal for pulling and pressing. A proven design; used throughout industry for over 45 years. The RT Series cylinders are compactly designed to withstand full “dead-end” ...
Torque: 1.7 Nm - 51 Nm
Speed: 0.05 m/s - 0.5 m/s
Overview The PHD Optimax® Series OCQ Pneumatic Compact Cylinder features a compact design for applications where cylinder length is critical. The Series OCQ features ...
PHD, Inc.
Stroke : 5 mm - 500 mm
Force: 11.8 N - 90 N
Torque: 0.5 Nm - 8 Nm
Cylinders 16-63 mm with compact overall dimensions in accordance with UNITOP recommendations (RP/ RO series) and with ISO inter-axes (RM/RN series) are available also in non-rotating version and with ...
UNIVER Group
Please specify:
Help us improve:
remaining