Force: 98 daN - 157,079 daN
Speed: 0.5 m/s
Bloc cylinder Power supplies and possible fasteners on each side of the cylinder Operating pressure 500 bar Bore Ø16 to Ø200 mm Seals Iso Double seal on rod Race on request every 5 mm
HPS International
Stroke : 50 mm - 1,500 mm
Force: 60 kN
Torque: 35 Nm - 45 Nm
Servo electric cylinder working principle:Servo electric cylinder is a modular product designed by integrating servo motor and ball screw, which converts the rotary motion of servo motor into linear motion, ...
Suzhou Fengda Automoation Equipment Co., Ltd
Stroke : 50 mm - 600 mm
... ELECTRICAL CYLINDERS – FOR HIGH PERFORMANCES AND LONG LIFETIMES Electrical cylinders (old designation: FlexLine) are intended for industrial use, therefore they are particularly robust and equipped with ...
Stroke : 20,000 mm
Force: 5,000 kN
Cylinders for intake gates, with central flange and surge tank •Traction force: up to 5,000 kN (500 t) •Rated pressure: 250 bar •Stroke: up to 20.000 mm •Complete with manifolds, sensors, and pipework •Various coating ...
Montanhydraulik
Stroke : 0 mm - 500 mm
COVERS Ø25 Anodized aluminium Ø32-40 Painted die-casted aluminium TUBE Ø25 AISI 304 Stainless steel Ø32-40 Anodized aluminium PISTON Ø25 Brass Ø32-40 NBR + Steel SEALS Polyurethane - NBR GUIDE BUSH Sintered bronze PISTON ...
Cy.Pag. S.p.A.
Stroke : 13, 14 mm
Force: 0.85, 1.4 kN
... swing clamp cylinder with integrated work support. These cylinders stand out for compact design, unparalleled clamping stability, smooth running and minor effects on the clamped workpiece. The ...
HYDROBLOCK
Force: 90 N
The available bores are from Ø 20 to Ø 100. Product is available in TANDEM execution, either by double thrust, multi position or front and rear opposed. The unit comes with an aluminum profile that contains slots for magnetic sensors.
ARTEC SRL
Stroke : 10 mm - 300 mm
Force: 452 N
Airpel Plus, Single-Acting Air extend, Front Stud Mount – Bore Size (mm): 24
1. Installed directly, without any accessories 2. Suitable for molds, machining fixture or install machinery where space is limited 3. Another type of sensor type and does not rotate.
Jufan Industrial Co., Ltd.
Stroke : 6,000, 1,000 mm
Force: 0.18 kN - 785.4 kN
Speed: 500 mm/s
Hydraulic cylinders in accordance with ISO 6020/2 The range of hydraulic double-acting CMB A3 series cylinders and servo-cylinders has been developed to meet the most demanding drive ...
CMB S.r.l. Cilindri oleodinamici
Double acting hydraulic cylinders, realized in high resistance aluminum with wear-resistente coating. Suitable for industrial automation applications, not in heavy duty conditions, when a light, compact ...
Stroke : 0.75 in - 3.75 in
These 1 inch square cylinders are available with a standard inch bore size(s) of 3/4" to 3" bore. They are available in stocked lengths ranging from 3/4" to 3-3/4". Longer or shorter strokes are available by contacting ...
Compact Automation Products
Stroke : 5 mm - 165 mm
Force: 1.12 kN - 294.19 kN
... FEATURES • High PERFORMANCE - SIZE ratio • Highly EFFICIENT • Optimum SPEED • Extremely RELIABLE • Testing report • Compact unit • No outside tank • Covered by INTERNATIONAL LICENCE GENERAL INFORMATION Such ...
LDP Italia - Thrust Technology srl
Stroke : 8 mm - 200 mm
Force: 1.2 kN - 392 kN
Block cylinders are popular design elements in all areas where very powerful short strokes are required. Block cylinders have internal piston rod threads for secure screw-in contact bolts. Their compact ...
HYDROKOMP
Stroke : 200 mm
Bore: 12 mm - 50 mm
Pressure: 0.1 MPa - 1 MPa
Compact Guide Cylinder - MGPK Space efficient rigidity Optimise your space - Compact and lightweigh design Achieve high performance and rigidity - ±0.03° of non-rotating accuracy Get ...
Stroke : 1,500, 1,000, 2,000, 500 mm
Force: 6,000 kgf - 32,000 kgf
Torque: 124 Nm - 1,109 Nm
... Power Cylinder with more than 6 tons rated thrust. Power cylinder that succeeds in providing a smaller, lighter unit with better cost performance while maintaining the same performance of the previous ...
DIN ISO 21287 pneumatic compact cylinder double-acting with magnetic piston Description Material: Cylinder tube: aluminium. End cover: die-cast aluminium. Piston rod: stainless steel ...
Stroke : 7 mm - 50 mm
Force: 100, 170 N
Stroke : 25, 50 mm
Force: 100 N
Torque: 0.38, 0.8, 2.25 Nm
Vane rotary units Compatct Rotation 180° or 90° Special angle on request Push-rod to adjust the angle Shock absorbers
Stroke : 25 mm - 200 mm
Force: 38 N - 961 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Cheaper Sliding on linear bearing or bushes Push up to 1200 N Stroke up to 200 mm
Stroke : 20 mm - 150 mm
Force: 400 N - 6,230 N
Speed: 0.1 m/s - 0.5 m/s
Pneumatic linear unit Fluid feed-through the shafts Rigid 4 shafts Pneumatic or hydraulic Push up to 1550 N Stroke up to 150 mm
Stroke : 0 mm - 6,000 mm
Force: 0 N - 3,000 N
Torque: 0 Nm - 45 Nm
Stroke : 10 mm - 400 mm
Force: 40 N - 7,500 N
Speed: 0 m/s - 1 m/s
Stroke : 419 mm - 515 mm
Pressure: 420 bar
Force: 20.7 kN - 46.9 kN
... overvoltage, single and double-acting cylinder drives in the transport: small hydraulic cranes, trucks, cab tilting, concrete mixers. Hydraulic cylinders for IVECO cab tilting system: ...
Stroke : 5 mm - 48 mm
Bore: 12 mm - 116 mm
Torque: 2 Nm - 2.95 Nm
Compact size and strong force absorption Very efficient energy guzzlers: The TA profile dampers from the ACE TUBUS-Series are maintenance-free and ready to install. They're made of co-polyester elastomer; a material ...
ACE
Stroke : 1, 0.5 in
Force: 8,850, 15,700 N
Block Heavy Duty Double Acting Cylinders Picture for category Block Heavy Duty Double Acting Cylinders Simple Mounting Compact Design High Output Forces
Stroke : 25 mm - 800 mm
Bore: 32 mm - 125 mm
Pressure: 0.1 bar - 10 bar
Standard cylinder, ISO 15552, double-acting, Piston Ø 32, Stroke 25, G 1/8, Working pressure max. 10 bar, Temp. -10 °C to 80 °C These cylinders are ideal for a wide range of applications owing to their ...
RIEGLER & Co.KG
Force: 0.25 kN
... Clamping Tehcnology Pneumatic cylinders with a flat design & construction, multi-force cylinder with mechanic power transmission. guiding cylinders. Retract cylinder ...
Please specify:
Help us improve:
remaining