Compact cylinders

Stroke : 5 mm - 500 mm
Pressure: 1 bar - 10 bar
Speed: 10 mm/s - 1,000 mm/s

... 21287 » Compact design » Wide range of models available in different diameters Series 32 cylinders, thanks to their compactness, are suitable for installation in confined spaces. Being in compliance ...

Stroke : 5 mm - 500 mm
Speed: 10 mm/s - 1,000 mm/s

This magnetic, double acting, compact Doppio effetto, magnetici ø 25, 40, 63, 100 mm has a body and end-blocks made up of anodized AL rod, a rolled stainless steel AISI 303 piston, an anodized AL rod seal. This is also ...

Stroke : 4 mm - 25 mm
Pressure: 2 bar - 10 bar
Ambient temperature: 0 °C - 80 °C

Series QN single-acting short-stroke cylinders have been designed so that they can be installed in very small spaces. Due to the compactness and sturdiness of these cylinders, they are ...

Stroke : 5 mm - 80 mm
Ambient temperature: -30 °C - 120 °C

This series of cylinders is available in two versions with different threaded fixing holes. The first one includes cylinders from Ø 32 to Ø 100 called “ISO” with fixing holes same as cylinders ...

Stroke : 20 µm - 100,000 µm
Ambient temperature: -5 °C - 150 °C

... _. A complete range of clamps makes them easy to install under any conditions. It is interesting to note that as these cylinders (from Ø 32 to Ø 100) have anchoring holes with the same lead and thread as those of series ...

Stroke : 5 mm - 500 mm
Bore: 32 mm - 63 mm
Force: 20 N - 93 N

Based on the ECOMPACT series with piston rods and centring diameters according to ISO 15552 standard.

Stroke : 50 mm - 300 mm
Force: 40 N - 500 N
Speed: 150, 300, 600 mm/s

Electric cylinders with absolute encoder for AC and DC power supply EAC series Features: Battery-free absolute sensor No external sensors required Low heat generation EtherCAT, EtherNet/IP, Profinet, Modbus ...

Stroke : 10 mm - 200 mm
Pressure: 1.5 bar - 10 bar
Force: 30.2 N - 294.5 N

... shorter than ever before. Ideal for tight spaces. Extremely robust thanks to its durable materials. • Compact variant of standards-based cylinder DSNU • Quick and easy installation, even in tight ...

Stroke : 1 mm - 500 mm
Pressure: 1 bar - 10 bar
Force: 51 N - 7,363 N

ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. • ISO 21287 • Up to 50% less installation space than comparable ISO cylinders to ISO 15552 • Piston rod with internal ...

Stroke : 2.5 mm - 25 mm
Pressure: 2.5 bar - 8 bar
Force: 5.7 N - 4,712 N

Fast acting cylinder with outstanding tensile force ratio and hole pattern for fastening to VDMA 24562. • Very short overall length • High forces in a compact size • Piston rod with internal or external ...

Stroke : 0 mm - 500 mm
Force: 138 N - 4,418 N
Speed: 0.01 m/s - 0.77 m/s

... 21287 compact cylinder for standard temperature -20°C to +80°C with high and low temperature options suitable for processing, packaging and handling applications. Product Overview The P1P Series is ...

Stroke : 0 mm - 3,000 mm

... Hydraulic Integral Feedback Cylinders conforming to ISO6020/2 and DIN24554. The tie rod construction sets the standard for performance, durability & trouble-free operation with superior design and quality for long cylinder ...

Stroke : 20 mm - 1,000 mm
Force: 2,000 N
Speed: 0 mm/s - 3.5 mm/s

... applications where up to IP69K dust and liquid ingress protection is necessary. It is best suited for applications with visual or compact installation dimension requirements. Hall sensors are optional for the JP3 which ...

Stroke : 20 mm - 1,000 mm
Force: 1,000 N
Speed: 0 mm/s - 7.6 mm/s

TiMOTION’s TA2 series linear actuator is compact, robust and capable of performing well in certain outdoor environments. This linear actuator is perfect for use in small spaces where force or capability ...

Stroke : 20 mm - 1,000 mm
Force: 2,000, 3,500 N
Speed: 0 mm/s - 2.4 mm/s

... the TA2 and the TA2P are compact, robust, and capable of performing well in certain outdoor environments. A more powerful motor makes the TA2P capable of handling load ratings up to 3500N (787 pounds) while retaining ...

This cylinder barrel has high resistance to impact, is sturdy with high load bearing. It is light weight with superior piston rod bushing and captive head in the cylinder. Equipped with non-metallic ...

The Premair Pneumatic Square Compact cylinder is an ISO 9001 certified, lightweight, compact cylinder which converts compressed air to linear motion. It is widely used ...

Stroke : 25 mm
Pressure: 2 bar - 10 bar
Force: 445 N

... in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - G1/8 Cylinder diameter: - 32 mm

Stroke : 4 mm
Pressure: 2 bar - 10 bar
Force: 55 N

... achieved in restricted space Neat, clean appearance One-piece body construction Medium: - Compressed Air Port size: - M5 Cylinder diameter: - 12 mm

Stroke : 50 mm
Pressure: 1 bar - 10 bar
Force: 482 N

SO compact double acting cylinder, 32mm diameter, 50mm stroke Medium: - Compressed Air Standard: - ISO 21287 Port Size: - G1/8 Cylinder diameter: - 32 mm

Stroke : 5 mm - 500 mm
Bore: 32 mm - 100 mm
Pressure: 10 bar

... with trade cylinders. The special profile and outer heads locked onto the barrel by screws ensure optimal guiding of the cylinder and multiple fixing options with a wide range ofmountings. To determine ...

Stroke : 1 mm - 500 mm
Bore: 32, 40, 50, 63, 80 mm
Pressure: 10 bar

... torques within the specified limits. The piston rod in Two-Flat cylinders has two opposing longitudinal surfaces and is mode entirely of stainless steel. The front head of the cylinder includes a sintered ...

Stroke : 5 mm - 500 mm
Bore: 20 mm - 100 mm
Pressure: 10 bar

Com pod cylinder to ISO 21287, UNER series, available in different versions to meet all possible requirements: • With or without magnet • Polyurethane or FKM/FPM gaskets (for high temperatures) also available • Dimensions ...

Stroke : 22 mm - 39 mm
Pressure: 250 bar
Rod diameter: 20, 25, 36, 42 mm

• total travel = rotation travel + clamping travel • right or left helical rotation, 90°±2° • bleeder near clamping (HL12, HL21, HL 31 & HL 41) • additional bleeder near release (HL31 & HL 41) • rod indexing • maximum service pressure: ...

Pressure: 350 bar
Rod diameter: 22, 28, 36 mm
Force: 8.7 kN - 31.1 kN

This range is derived from the BDS but is more COMPACT (ø40 & 63). There are 4 sizes available (80, 120, 160 & 200mm) for 3 diameters (40, 50, 63mm). Strokes can be set on demand by means of a stroke-limiting ring. The ...

Force: 50 kN
Motor power: 1 kW
Speed: 0 m/s

... newly developed electric cylinder ELZP is an ideal extension of the comprehensive program of gear of the company Enzfelder. With the special construction, motor receives parallel to the cylinder tube, ...

Stroke : 25 mm - 150 mm
Pressure: 3 bar - 8 bar
Rod diameter: 12, 16, 20, 25 mm

... Double plate on guided pneumatic cylinder The back plate, identical to the front plate, makes it possible to fix this cylinder by the two plates and thus to have the body in motion. Anti-corrosion ...

Stroke : 60 mm - 1,200 mm
Pressure: 0 bar - 200 bar
Force: 9.8 kN - 100.5 kN

... valve function for unthrottled cylinder start ● Fixing thread and centring spigot at both cylinder heads allow mounting of non standard accessories ● Particularly suitable for fixture building by direct ...

Stroke : 50 mm - 200 mm
Force: 12.3 kN - 196.4 kN
Speed: 0.5 m/s

B1.7385 RS hydraulic slides B1.7385 RS hydraulic slides double acting with 4 guide rods with optional stroke end control max. operating pressure 250 bar piston diameter: 25 .. 100 mm rod diameter: 16 .. 60 mm stroke: 50 .. 200 mm max. ...

Stroke : 1 mm - 100 mm
Force: 500 N
Speed: 38 mm/s

... features are responsible for the electric cylinder BGR 010's success: These drives have been specially designed for confined spaces and harsh operating conditions; thus, they are compact and robust. ...

Stroke : 20 mm - 130 mm
Force: 750 N
Speed: 50 mm/s

... little harm as the jet of a high-pressure cleaner or the strong vibrations of a construction machine. Thanks to its robust, compact housing and customization options, the LD75 can be used for a wide range of applications ...

Stroke : 15 mm - 300 mm
Force: 1,000 N
Speed: 100 mm/s

The electric cylinders of the 015 series can be flexibly configured, which makes them perfect for a variety of industrial applications. Infinitely variable stroke lengths up to 300 mm, various overall lengths and a ...

Stroke : 5 mm - 250 mm
Bore: 12 mm - 100 mm
Pressure: 0 bar - 10 bar

... rod - High resistance polyurethane seals - Competitive price CM series compact cylinders made by Airwork comply the ISO 21287 norm. They are particularly suitable for small spaces ...

Stroke : 5, 10, 15 mm
Pressure: 0 bar - 6 bar

... Threaded or smooth rod Cartridge cylinders CH series have extremely reduced dimensions. Secondly, thanks to the threaded body it can be installed in any part of the machine. The air sealing between threaded hole ...

Stroke : 5 mm - 200 mm

... sealing's longer lifetime Newest compact guide cylinders are Airwork’s top of the range. This linear actuator offers a very high robustness combined with very small dimension. It ...

Stroke : 100 mm - 1,000 mm
Force: 15,000, 10,000 N
Speed: 0 mm/s - 1,250 mm/s

New electric cylinder for heavy-duty applications RK Rose+Krieger has expanded its range of electric cylinders with the introduction of an additional electromechanical heavy-duty cylinder: ...

Stroke : 50 mm
Force: 0 N - 300 N
Speed: 0.55 in/s

The electric cylinders of the component M9 are low-cost linear drives for small powers and feature compactness and space-saving dimensions.

Stroke : 40 mm - 100 mm
Force: 50 N - 500 N
Speed: 0.8 in/s

010 Electric cylinder The compact electric cylinders of the component 010 are especially designed for demanding situations. They are equipped with high-quality, non-ferrous motors, withstand ...

Stroke : 50 mm
Force: 111.3 kN - 929.1 kN

... splined and removable head. • Custom made Hydraulic cylinders high pressure can be manufactured on customer request. Compact hydraulic cylinders - Low Height Cylinders Compact ...

Stroke : 6, 10, 14, 15 mm
Force: 43.1 kN - 1,496.8 kN

... extra flat hydraulic cylinders for lifting operations with extremely reduced closed height, ideal for working in narrow spaces where it would be impossible to use other cylinders. • Thanks to its ...

Stroke : 25 mm - 300 mm
Pressure: 700 bar

... High-strength removable head. • Custom made hydraulic cylinders high pressure can be manufactured on customer request up to 3000 ton. High tonnage cylinders, oil return High tonnage hydraulic cylinders ...