Control valves

DN: 1 in - 24 in

... Balancing Valves are designed specifically for heating/air conditioning systems in multi-story commercial buildings. Balancing Valves provide a means of adjusting and reading the flow in condenser and ...

DN: 0.25 in - 0.5 in
Pressure: 10.3 bar
Temperature: 165 °C

Type Biopure Material Bonnet: 316 Stainless Steel Handwheel: Polyethersulfone (PES) Bio-Pure is the compact solution for the most demanding applications in the biopharmaceutical industry. Due to its standardized sizes and a wide range ...

DN: 10 mm
Pressure: 0 bar - 6 bar
Temperature: 0 °C - 110 °C

Electronic control valve with ceramic technology and integrated ultrasonic flow measurement, temperature measurement and pressure measurement and integrated PID control. Features Integrated ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -60 °C - 200 °C

... PVDF, PP; UHMW-PE Options - 5mm lining, monitoring and flushing connection, limit switch, stem extension, heating jacket, control ball

Plug valve features a cylindrical or conic disc that controls the flow of the fluid, opening and closing the passageway between the opposite ports. The lever to control ...

DN: 25 mm

Valve 25 of sphere with demultiplier. Thread of 1 “female-female, male-TC female or male-female.

DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C

This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate.

... that has clumped together in storage, dust formation, ensuring exact/calibrated quantities etc. Product range ■Flat slide valves ■Chutes ■2-way switches Properties/variants Applications For flowing or pourable bulk ...

DN: 15 mm - 150 mm
Pressure: 40 bar
Temperature: -40 °C - 300 °C

The valve is fitted directly in the process line or on a by-pass. A constant flow through the valve guarantees a directly representative sample

DN: 10 mm - 50 mm
Pressure: 10 bar - 16 bar
Flow rate: 51,000 l/h

Proportional ball valve based on the C 200 Patented ball geometry with proportional characteristic curve (linearised connection of flow quantity and opening angle) Simple automation using electric variable speed actuators Reproducible ...

DN: 0.75 in
Pressure: 250 bar
Temperature: -54 °C - 204 °C

... flow restrictor hydraulic valve. Operation The NV08-P0 allows the orifice to change from fully closed to fully open with counterclockwise adjustment rotation. Feature Adjustment cannot be backed out of ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

DN: 10 mm
Pressure: 10 bar
Temperature: 65 °C

Front control valve, inlet and outlet copper tube 10x1mm, for water TECHNICAL FEATURES Media: Water Maximum pressure: 10 bar Maximum temperature: 65° C Fluid identification: EN 13792 Design: ...

DN: 8, 10 mm
Pressure: 16 bar
Temperature: 0 °C - 90 °C

... triangular key against unauthorised removal of water valve body and sampling pipe can be rotated 360° PTFE seat gasket can be attached to all Kemper valves with test/drain-port valve ...

DN: 0.125, 0.25, 0.375, 0.063 in
Pressure: 10,000, 15,000 psi
Temperature: 650, 450, 350, 200 °F

... Materials include high tensile type 316 stainless steel for the valve body and hardened 17-4PH stainless steel lower section stem. Air operators for remote control operation are available for all valves. ...

DN: 0.25 in - 2 in
Pressure: 63 bar
Temperature: -20 °C - 200 °C

AISI-316 · BSPP ISO-5211 mounting pad to mount directly actuators Characteristics •General industry application. •Blow-out proof stem design. •100% tested with air & water (Open/Close). Specifications •Ends: BSPP threaded ...

The Model DGV Deluge Valve is designed for use in controlling water flow to deluge, pre-action or foam-water type fire protection sprinkler systems. This valve is UL Listed in Special Systems Water Control ...

DN: 6 mm
Pressure: 700 bar
Temperature: -20 °C - 60 °C

Our manual valve is designed for reliable use with single or double acting hydraulic systems. If desired, it is available with a lock function for secure load holding. Technical data Mounting face Cetop C DIN ...

DN: 3 in - 16 in

Production of complete plug valves or independent components for plug valves. In-house manufacture of the different components for plug valves: caps, bodies, sleeves, etc. Wide experience ...

... and secondary vessels in mixing plants, wagons, reservoirs under filters and separators, cone worm mixers By means of the lever system, the flap is vertically moved down and swivelled laterally by the side of the discharge ...

DN: 40 mm - 1,200 mm
Pressure: 40, 10, 16, 25 bar

STANDARDS OF MANUFACTURE Metal seat gate valves EN 1171 (ISO 1083) DUCTILE IRON GATE VALVES EN 1074-2 ISOLATING VALVES EN 558 (ISO 5752) FACE TO FACE EN 1092-2 (ISO 7005-2) DRILLING ...

DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min

The FPSB series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow control ...

Pressure: 10.3 bar
Temperature: 0 °C - 40 °C

The ISQBF series control valve is an electronic pressure regulator designed to precisely and proportionally control the pressure of gases based on an electronic signal. The ISQBF is ...

DN: 0.25 in - 4 in
Pressure: 1,000, 800, 600 psi
Temperature: -20 °F - 450 °F

... psi W.O.G; 4" 600 psi Temperature range -20° to 450°F End types threaded with Locking device Locking lever handle