Control valves

... using an arrangement of ball valves and/or needle valves in the same valve body. For applications with liquid or dirty media, ball valves are recommended due to easy ...

DN: 5, 10 mm
Pressure: 138 bar - 690 bar

... integrates two shut-off valves to separate the process from the instrument side. The modular monoblock design allows using an arrangement of ball valves and/or needle valves. Injection ...

DN: 15 mm - 400 mm

Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control ...

DN: 40 mm - 250 mm

Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and ...

DN: 15 mm - 20 mm

Threaded valves with 500 N actuator Valves from DN15 to DN20 -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model

DN: 1.96 in
Pressure: 60 psi

Single passage rotary timing valve designed to supply peracetic acid (PAA) for a PET bottle washing application. Features include a custom timing valve design to supply PAA media to 36 nozzles under a ...

DN: 0.2 mm - 1.5 mm
Pressure: 35 bar

... grease and oil The spray valve is a special kind of valve designed for full-surface application of greases and oils. It is suitable for both intermittent and continuous material applications. A unique ...

DN: 8 mm - 14 mm

... Ball Valves Provide manual dispense control to a paint station or dispense point. Eliminating the nagging “dirt in paint” problems starts with having the paint drops comprised of Hosco smooth-bore, cavity-free, ...

Pressure: 2.5 bar - 15 bar

Elcometer AGV Automatic General Valve ensures precision abrasive control and fail-safe shut down of both the blast stream and media flow. • Media flow indicator and rubber liner wear indicator • Tested ...

... converts an Elcometer GV general valve into an automatic general valve, giving you precision abrasive control and fail-safe shut down of both the blast stream and media flow. • Easy ...

The RCV4000+ Remote Control Valve incorporates two valves in one unit, the lower unit controls the compressed air inlet and the upper unit controls the ...

Flow rate: 12, 60 l/min

Braking valve Free flow in one way, adjustable flow in the other way RD11 : G1/4’’ oil ports, maximum oil flow 12l/min RD31 : G1/2’’ oil ports, maximum oil flow 60l/min

Flow rate: 5 l/min - 2,400 l/min

... require specific control characteristics. For applications such as Damper testing where both high velocities and low speed precision control are necessary, it’s possible to install both 3 stage and ...

DN: 6.35 mm
Pressure: 10 bar

SOLENOID VALVE FOR COMPRESSED AIR, PUMP CONTROL. NO, Solenoid valve for compressed air. Brass and NBR. 24 V DC. Normally open type N.O. 1

DN: 0.5 mm - 2 mm
Pressure: 30, 40, 65 bar

The RKE electric ball valve automatically opens or closes the compressed air tank via the control unit or connects and closes areas of the network from the compressed air supply as required. This prevents ...

DN: 0.75 in - 1.5 in
Pressure: 0.3 bar - 8.6 bar
Temperature: -20 °C - 85 °C

... Diaphragm Valve BRD and BDV series are dust collector valves used specifically in dust collector and baghouse systems. The two chambers of the dust collector valves are connected together ...

... speed. Besides the proportional control valves we also offer standard control valves. You can choose between a hand control valve (HCV) ...

FLUSHING VALVE Flushing valve FLX constructed in cast iron, to be installed directly on the pump casing by means of a threaded coupling. This type of valve operates on the "Venturi" principle ...

Pressure: 350 bar

C2.940 Flow control valve with locking screw C2.940 Flow control valve with locking screw max. operating pressure 350 bar nominal diameter: ND 4 .. 12 ports: G1/8 .. G1/2

Pressure: 100, 500, 1,000 bar

... purpose, Poppe + Potthoff Maschinenbau GmbH develops and manufactures high-pressure valves for the control and regulation of volume flows in hydraulic applications. The valves are pneumatically ...

DN: 0 mm - 0 mm
Pressure: 0 bar - 420 bar
Temperature: -20 °C - 200 °C

Drain valve has been developed for manual discharging of condensate or any other non-aggressive fluid from compressed air(1) system. In order to prevent condensate from becoming re-entrained in the airstream we recommend ...

DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C

... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm ...

... Sample Valve (5157A Model): Ideal for general sampling, the standard sample valve can be quickly installed on the pipe line or container. The valve clamps into position. This enables ...

DN: 10 mm - 260 mm

... resistance. Whether in medical devices, industrial fluid control, or laboratory systems, PEEK valves deliver precise and reliable flow control. With the ability to withstand extreme temperatures ...

The Model 472A Spray Valve is an air-open/spring-closed spray valve available in brass or stainless steel. The valve features metering adjustment of output volume and a choice of air-cap ...