Control valves

DN: 3.2, 4, 6 mm
Pressure: -100,000 Pa - 1,000,000 Pa
Temperature: -5 °C - 60 °C

2/3-Port Mechanical Valve with One-touch Fitting VM100F ・Built-in One-touch fitting reduced installation space and less piping work ・Space saving 　Built-in One-touch fitting Approx. 35% reduction (25.8 mm shorter) ・Lightweight 　With ...

DN: 15 mm - 200 mm
Pressure: 25, 16, 40 bar
Temperature: -10 °C - 450 °C

Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up ...

Pressure: 3.5, 1.5 bar
Temperature: -20 °C - 100 °C

• Made of stainless steel with large free cross section and sealed gate blade • For installation between two flanges in gravity pipes at up to 1.5 barg (FUS) and 3.5 barg (FUH) • Low construction height - Application Suitable ...

DN: 150 mm - 2,200 mm
Pressure: 10 bar - 25 bar
Temperature: -10 °C - 85 °C

Double-offset butterfly valve with epoxy coating. Perfect shut-off in either flow direction. Flanged ends to EN standards, body and valve disc made of nodular cast iron. Main Applications General ...

DN: 0.25 in - 1.375 in
Pressure: 450, 700 psi

... discharge bypass regulating valves have a brass body. The smaller capacity direct acting valves are available with SAE or ODF connections. The larger capacity pilot operated valves have ...

DN: 20 mm - 150 mm
Pressure: 52 bar
Temperature: -60 °C - 120 °C

... motor operated valves from Danfoss ICV Flexline™ series are quick and simple to handle, install and service due to their low weight and compact design. The valve is designed to regulate the expansion ...

DN: 3.35, 4 in
Pressure: 0 bar - 517.1 bar
Temperature: 0 °F - 250 °F

Rotary Systems’ timing valve is designed for applications that require automatic clamping and unclamping. This timing valve eliminates the need for a control valve or ...

DN: 0.25 in - 1.5 in
Pressure: 0 bar - 690 bar
Temperature: -40 °C - 74 °C

30 Series shut-off valves are high pressure, high flow applications up to 10000 psig / 690 bar and offer Cv = 0.28-20.0. The 30 Series offer globe and angle pattern bidirectional flow, soft seat and built-in metallic ...

DN: 0.75 in - 1 in
Pressure: 103, 10.3 bar
Temperature: -40 °C - 82 °C

... high-pressure shut-off valves serve to provide overpressure protection by containment. Type 634 shut-off valve with internal registration is installed between a pressure reducing regulator ...

DN: 0.125 in - 0.5 in
Pressure: 35 psi - 130 psi
Temperature: 0 °F - 160 °F

Soft-start valves allow pneumatic components to be pressurized slowly for safety and control. MGV series soft-start valves are available with port sizes from 1/8" NPT to 1/2" NPT and ...

Pressure: 0 bar - 8 bar
Flow rate: 1,600, 350 l/min

... self-heating) Control from 0 bar (vacuum version available) High pressure control stability The piezo-controlled proportional valves of the Tecno series are 3-way pressure valves ...

DN: 2, 3, 1 in
Pressure: 15,000 psi

... premium quality plug valves offering for a wide range of well drilling production&well-servicing applications. Available the range in size1”ro 3”&pressure rating upto 15000psi. Other valve products, such ...

DN: 0.75, 1 in
Pressure: 276 bar
Temperature: -54 °C - 177 °C

Parker's B12 Series Ball Valves are available to operate manually or pneumatically for large V and 1" tubing systems.. They provide quick on-off control of fluids utilized in process and instrumentation ...

DN: 40 mm - 900 mm
Pressure: 16, 25 bar
Temperature: 80 °C

The Model 757-66-U Level and Flow Control Valve with Bi-Level Vertical Float is a hydraulically operated, diaphragm actuated control valve that controls ...

DN: 40 mm - 100 mm
Pressure: 73, 145, 87, 116 psi
Temperature: 275, 284 °F

Valves / Mixproof Valves The DT4 tank outlet mixproof valve is used for the reliable separation between the tank and servicing pipeline. The DT4 tank outlet is an extension to ...

DN: 20 mm - 100 mm
Pressure: 12 bar - 40 bar
Temperature: 0 °C - 220 °C

2/3-Way Motorised Control Valves with Electric Actuator For Mixing or Diverting type(On-Off and Control Application). Fluid: Air, Water, Steam, Gas

DN: 15 mm - 65 mm
Pressure: 2 bar - 16 bar
Temperature: -10 °C - 180 °C

... analog position feedback signal 0-10 V / 4-20 mA (after automatic balance) Control_element: 2-port/2-way valve, NC (normally closed) as standard, as option 3-port/2-way valve ...

DN: 0.25 in - 0.5 in
Pressure: 0 bar - 210 bar
Flow rate: 0 l/min - 55 l/min

Variable Flow Control Valves maintain the flow rate of hydraulic fluid to a selected value. Applications include hydraulic cylinders requiring constant extension or retraction speeds and hydraulic motors ...

DN: 30, 25, 18 mm
Pressure: 6 bar - 420 bar
Temperature: -20 °C - 90 °C

... various manifold valve plate configurations Design characteristics directional control valves available as sub plate mounted valves nominal sizes 18, ...

Pressure: 1.5 bar - 8 bar
Temperature: -10 °C - 75 °C
Flow rate: 300, 110 l/min

Signal processing valves These valves suitable for power or control circuits allow to obtain an output signal provided there are both input signals (AND valve) or one ...

Model : MSC100 / 200 / 300 / 500 / 600, Medium : Air, Operating pressure range: 0~1 MPa, Proof pressure: 1.5 MPa.

DN: 0.125 in
Pressure: 0 bar - 34.5 bar
Temperature: 0 °C - 121 °C

... 90 degree flow patterns Valves are offered in straight (T) and 90 degree (L) flow patterns. All valves are supplied with 1/8” FNPT inlet and outlet ports. Valve cartridges are ...

DN: 20 mm - 150 mm
Pressure: 6 bar
Temperature: 2 °C - 110 °C

... working Areas of use Continuous control of the supply temperature in heating systems in which a certain loss through leakage is desired. Features MH32F: 3-way valves with nominal diameters DN 20...150 MH42F: ...

... customer-defined controls based on a unique combination of modern technologies, proven valve components and customer participation. It designs a unique product using CAD/CNC, based on the customer’s input ...

Pressure: 0 bar - 10 bar
Temperature: -25 °C - 85 °C

Certificates: Tested and Proven for Automative applications