Power: 0.94 kW - 3.6 kW
Maximum temperature: 25, 15 °C
Mono-block refrigerators for internal installation, supplied with pump and tank, designed for water or glycolate cooling systems. Especially designed for cooling welders, inductors, smelters for the golden industry, packages, blisters, ...
OMI Officine Meccaniche Industriali
Power: 250 W
Maximum temperature: -10 °C - 40 °C
Flow rate: 9 l/min
The compact design fits effortlessly on a laboratory bench and comes with a cooling capacity of 250 W* • Clearly arranged control elements, large LED display, membrane keypad, and window for monitoring the tempering liquid level • ...
Heidolph Instruments GmbH & Co. KG
Power: 1.7 kW - 4.4 kW
The chillers of TAE N Mini series, developed based on TAEevo TECH Mini range, are the ecological and natural turning point of MTA, towards solutions aimed to reduce the environmental impact through the refrigerant R290 ...
MTA S.p.A
Maximum temperature: -90 °C - 100 °C
Flow rate: 7 l/min - 56 l/min
Pressure: 45 psi - 100 psi
... to provide varied sample temperature control for NMR, EPR and cold airflow applications. This versatile and accurate sample cooler with acute temperature stability ensures you never have to worry about the reliability ...
SP Scientific Products
Power: 6,000, 16,400 W
Maximum temperature: -5 °C - 45 °C
SCI immersion coil chillers were developed to maintain temperature of contaminated fluids. This cooling solution does not require any pump and prevent the clogging risks from the heat exchanger. Compatible with water, ...
EURODIFROID
Power: 6,500, 9,200, 12,000 W
The immerged coolers RCS were been developed to maintain fluid (low viscosity) in temperature. They are dedicated to cooling in bath. This cooling solution don't use hydraulic's components (pump), and avoids leakage. There ...
EURODIFROID
Power: 1,500 W - 17,500 W
Maximum temperature: 10 °C - 40 °C
Flow rate: 5 l/min - 64 l/min
Oil Chillers approved by RCF and FRI are used to cool process and machines using soluble or full oils with Module Froid technology. The modularity and available options make it suitable for electro spindles, hydraulic ...
EURODIFROID
Charge air coolers For decades we have been a leader in the development and manufacture of charge air coolers for combustion engines. Installed on thousands of diesel and gas engines these coolers ...
Kelvion Holding GmbH
BLAST FREEZER If a commercial product does not meet the market demands, our Customized Air Cooler product line offers a design-to order process, with your application needs as the starting point. We optimize the ...
Kelvion Holding GmbH
... offical approvals and certifications allow us to design and manufacture closed circuit coolers for many and various applications. Our standard range of closed circuit cooler models is designed to satisfy ...
Kelvion Holding GmbH
Power: 0 BTU/h - 85.3 BTU/h
Maximum temperature: 5 °C - 45 °C
Flow rate: 1 l/h - 260 l/h
The RCI 700 gas cooler ensures reliable cooling and drying of the sample gas to effectively remove moisture. This helps protect measurement devices and ensures precise gas analysis. Ideal for applications in the chemical ...
Power: 0 BTU/h - 85.3 BTU/h
Maximum temperature: 5 °C - 45 °C
Flow rate: 1 l/h - 90 l/h
The RCI 500 gas cooler offers reliable cooling and drying of sample gases, perfectly integrated into a compact 19" rack-mountable enclosure. This space-saving design allows for easy integration into your existing cabinets ...
Power: 0 BTU/h - 85.3 BTU/h
Maximum temperature: 5 °C - 45 °C
Flow rate: 1 l/h - 260 l/h
The RCI 100 gas cooler comes in a wall-mounted or free-standing enclosure, providing a reliable solution for cooling and drying gas samples. Its compact housing makes it especially versatile, allowing for easy integration ...
... can increase the water temperature within the tank shower to levels which may scald a user upon activation. This flameproof chiller is suitable for use in hazardous environments, ATEX Zone 1, and will maintain the water ...
Maximum temperature: 16 °C - 38 °C
... should be tepid. In extreme hot climates solar radiation can heat water within the tank to dangerous levels. The Zero Power Cooler, designed and developed in collaboration with Celantel, uses the night time ambient temperature ...
Power: 0.75 kW
Flow rate: 12 m³/h
AXIAL COOLER AC-22 portable evaporative air conditioners are ideal equipment for naturally cooling and ventilating all types of industrial premises up to 150 m2. Its basic operating principle is to suck the air from ...
Cooling system to be connected to the undevacuum homogenizer or to the tube filling and closing machine. Dimensions and capacity following to the custoner needs.
Maximum temperature: -100 °C
The Asia Cryo Controller high performance, ultra cold cooling module for flow chemistry reactions. This compact module requires only mains power to rapidly cool a selection of fluoropolymer or stainless steel tube reactors to -70°C ...
Maximum temperature: 0 °C - 200 °C
Pressure: 36, 8 bar
BOILER CHECK POINT Boiler Check Point is designed for checking quality of water in industrial boilers. Boiler Check Point is destined to cool the boiler water in order to reduce temperature before the analysis. Depending on the different ...
Maximum temperature: 5 °C - 50 °C
... The ECP 1000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Maximum temperature: 5 °C - 50 °C
... The ECP 2000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Maximum temperature: 5 °C - 50 °C
... The ECP 3000C gas cooler is used in gas analysis to lower the dew point of humid to avoid condensation in the analyser. An extremly stable gas dew point avoids water vapour crosssensitivity and volumetric errors. Electric ...
M&C TechGroup Germany GmbH
Mobile Cooling Units You might have a malfunction in your air conditioning system and the system has not been designed with any redundancy scenario. Or, your current setup does not satisfy you from efficiency point of view. Besides, ...
TMS Industrial Refrigeration
Power: 5 kW - 1,600 kW
... printing, machinery, energy, shipbuilding, marine, aviation, composite and defense industries. Fully customized water chillers beyond the traditional limits!
TMS Industrial Refrigeration
Power: 5 kW - 1,600 kW
... printing, machinery, energy, shipbuilding, marine, aviation, composite and defense industries. Fully customized water chillers beyond the traditional limits!
TMS Industrial Refrigeration
Power: 160 W
Maximum temperature: 10 °C
Flow rate: 7 l/min
This instrument allows cooling a water bath (via a thermostat) at temperatures below ambient temperature. This is made possible by reducing the temperature by 10%, thus allowing to perform the test without having to resort to more expensive ...
... obtains better heat transfer parameters and thus smaller overall dimensions. Evaporator It is possible to use shell-and-tube or plate evaporators. If required, the evaporator can be made of stainless ...
Power: 40 W
Flow rate: 600 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Power: 41 W
Flow rate: 720 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Power: 41 W
Flow rate: 800 m³/h
The air forced fan cooling system allows the transformer to withstand higher powers than rated ones and to maintain an optimal temperature increasing the safety of the machine. The installation of the fans on machines ...
TECSYSTEM srl
Power: 335 W
Flow rate: 4,500 m³/h
It is an adiabatic cooler capable of reducing temperatures in small rooms. It is an environmentally friendly solution with low operating costs. Main features Low cost and easy installation Low power consumption Ecological Suitable ...
... motors, other components. Heat Exchangers radiators (HT, LT) oil coolers (engine, hydraulic, transmission, etc.) charge air coolers compressed air coolers fuel coolers condensers Constructive ...
... brazed oil coolers using the following constructive solutions: plate&bar, shell, brazed plates and in-tank, tube&fin. Oil coolers Hydraulic Oil Cooler Transmission Oil Cooler Engine ...
RAAL designs and manufactures aluminum brazed air coolers using the following constructive solutions: plate& bar, shell, tube&fin. Applications - Agricultural and forestry equipment Construction and mining equipment Automotive Commercial ...
Power: 0.16 kW - 0.43 kW
Flow rate: 1,675 m³/h - 2,500 m³/h
... the coolant ambient air that passes over the radiant by means of a fan operated by an electric or hydraulic motor. The cooler element, in high resistance aluminium alloy, is obtained by means of a braze-welding process carried ...
Emmegi Heat Exchangers
GVF Impianti's cooler series consist of a range of product well-structured in type and flow rate that adapts to all plant needs using the fluid bed technology; Air to Air, Air to Water and Ait to Oil Coolers, ...
The air cooling line transports through the conveyer belt and completes the product cooling under the functions of upper cooler. It is especially suitable for the cooling of frying food and the rapid cooling of products ...
Flow rate: 4,000, 2,000 l/min
The C 072 model, and the C 076 model are manufactured by Acf, and are air coolers that have a rated purification capacity that ranges from 2,000 l/min up to 4,000 l/min. They are equipped with a pressure gauge, and features ...
To quickly reduce the temperature of the product with cold air circulation through a cooling coil. The cooling tunnel is in stainless steel, with insulation panels that can be opened for cleaning. The treatment parameters (temperature ...
COOLING SYSTEMS Complete solutions for compact applications. Customisable to your technical requirements. Economical thanks to standardised individual components. Of course, natural convection can also be used ...
Please specify:
Help us improve:
remaining