Current connectors

Primary current: 16 A
Voltage: 500 V
Operating temperature: -40 °C - 100 °C

Primary current: 40 A
Voltage: 1,000 V

... output and power management in a simple package - Multiple power contacts provide efficient current distribution of multi-voltage outputs - Multiple output contacts can be paralleled ...

Primary current: 680 A
Voltage: 1,500, 1,000 V

SPeX is a safe, reliable single pole connector for high power applications with a high capacity to absorb frequent overcurrents up to 10*In. It is designed for use in potentially explosive atmospheres (zones 1, 2, 21, ...

Primary current: 3 A
Voltage: 60 V
Pitch: 2 mm

... rates up to 10 GB/s • Additional power transmission up to 50 W via Power over Data Line (PoDL) possible • Mating faces of sub-standards IEC 63171-2 /-5 /-6 /-7 with IP20 or IP6X solutions available • ...

Primary current: 10, 8.5 A
Voltage: 600, 250, 2.5 V
Operating temperature: 125 °C

Crimping insert Pin; Number of contacts: 24+PE; Design size: 6B; 600 V AC rms / DC after CSA; 10 A after IEC; For cross-section (min./max.): 0.14mm² - 2.5mm²; Polycarbonate The H-DD series with machined ...

Primary current: 16 A
Voltage: 250 V

The small and thin HA series can be used wherever space is limited. The wire connection level is designed as a crimp contact. The established crimp connection has been used as a standard for decades. Crimp contacts are not delivered ...

Primary current: 50 A
Voltage: 400, 250 V

... RST® POWER series comprises high-current connectors for large cross-sections and is specifically aimed at equipment engineering. PLUG & POWER With a current-carrying ...

Primary current: 1 A
Pitch: 2.54 mm
Operating temperature: -55 °C - 125 °C

... Contact rows 5 Contact spacing (termination side) 2.54 mm Contact spacing (mating side) 2.54 mm Rated current ‌ 1 A Rated current Rated current measured at 20 °C, see derating ...

Primary current: 0.5 A - 10 A
Voltage: 60 V - 250 V
Operating temperature: -40 °C - 60 °C

... Profiled Spigot and connector body prevent cable rotation, eliminating cable damage. The 4-way and the 9-way options will accept cores ranging between 0.5mm² and 2.5mm² and can operate up to a maximum current ...

Primary current: 1.5, 0.35 A
Voltage: 30, 42 V

... tested, the Standard Buccaneer is one of our most popular waterproof circular connectors in the industry today. IP67, IP68 and IP69K rated, these waterproof circular RJ45 connectors are ideal for harsh ...

Primary current: 160 A
Voltage: 750 V
Operating temperature: -40 °C - 80 °C

Mainly used for current transmission between battery box and vehicle, battery line and charging end, and is suitable for vibration environment of electric vehicle during driving. Straight plug non-locking connector, ...

With the hermaphroditic MicroStac connectors, the plug and mating plug are identical. The connectors are available in single-row and double-row variants. They offer economical solutions for connectors ...

Primary current: 160, 80, 320 A
Voltage: 150 V
Operating temperature: -20 °C - 90 °C

Including the versions 80 A, 160 A, 320 A, this range is in accordance with the current Norms DIN VDE 0623-589, defining unified distances between centres and representing the evolution of the previous DIN Norms. The ...

Primary current: 32 A
Voltage: 250 V

The 32 A powerCON is an extremely robust and reliable locking single phase AC appliance cable connector for high current capacity (32 A rated). It is conceived as a non-standardized 3 ...

Primary current: 1,000 A

Single-piece Power Elements are used for the supply and distribution of high currents in connection with circuit board based systems. Depending on the pin arrangement and the layout, currents ...

Primary current: 0 A - 3 A
Voltage: 150, 600 V

Harsh environments Axon’ rectangular micro-D connectors are designed for harsh environments. With 1.27 mm (.050?) contact spacing, micro-D connectors, half the size of D-Sub connectors, ...

Primary current: 0.5 A
Voltage: 50, 60 V
Operating temperature: -40 °C - 85 °C

... 40 °C/85 °C is this shieldable M16-X female panel mount connector designed for both severe cold and severe heat. Due to the qualified rated voltage of 50 V (AC ) / 60 V (DC) and the rated current of 0,5 ...

Operating temperature: -25 °C - 105 °C

The DW07 Series connector is used to easily connect power busbars in high-current equipment. The DW07 Series is an innovative connector solution that uses no screws, ...

Primary current: 2 A
Voltage: 800 V
Operating temperature: -25 °C - 85 °C

Mating: Packing:Bag Delivery time:7~15 Day UL: Yes ROHS Compliant Contact resistance: 20mΩ Max Insulation resistance: 1000mΩ Min Contact material: Brass Contact plating: Au or Sn over Ni Insulator material: PA6T

Primary current: 3 A
Voltage: 14 V
Pitch: 2.54 mm

Application - Automotive Connector - Wire to Board Smt - no Number of circuits - 32 0.64 unsealed surface mounting type connector with Auto Coplanarity Technology. This technology achieves stable ...

Adam Tech ADC Series DC Power Jacks are a complete line of miniature and sub-miniature power jacks primarily used for the transmission of wall current transformed to DC ...

Primary current: 500 mA

... design and the use of a ceramic PCB guarantees an extremely low attenuation with very good RF matching. The corresponding connector is included and will be deliverd together with the product. Frequency range - 10 ...

Impedance: 100 Ohm
Voltage: 100, 250 V

... Internet and mobile communications 1.7 Next Generation Local Area Network (Wireless Gigabit) Frequency range(depends on cable) - DC to 6GHz Return loss - ≥20dB，DC to 1GHz ≥17dB,1GHz to 2GHz Insertion loss - ≤0.1dB，DC ...

Primary current: 0.5 A
Voltage: 30 V
Pitch: 0.8 mm

Designs are based on the industry standard SFP Multi-Source Agreement (MSA).The SFP board mount connector is 20 position and 0.8mm pitch.High Speed Contact Design.High temp and IR reflow compatible versions are available. ...

Primary current: 1 A
Voltage: 250 V

Micro match male straight type Technical specifications Current rating : 1.0 A Voltage rating : 250 Volts AC, DC Dielectric withstanding voltage : 500 Volts AC during 1 mn Insulation ...