Cutting ring fittings

- Combination of cutting ring screw joint and plug connector - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature ...

Operating pressure: 0 psi - 150 psi

COMPACT PUSH IN FITTINGS PC-C Compact push in fittings PC-C are ideal for small type of pneumatic piping. Compact push in fittings is 40% smaller volume ratio in comparison to the ...

Diameter: 0.25 in - 2 in

... diameter in most sizes. The reusable metal-to-metal sealing components further enhance the seal as temperature and pressure changes are encountered. The safety ring ensures safe venting of residual pressure. ...

Diameter: 6 mm - 500 mm
Operating pressure: 6, 10, 12.5, 16, 20 bar

Atoxic UPVC fittings for the construction of pipeline systems for fluids under pressure. The different types of connection are: rubber ring socket, solvent socket , plain ends or threaded ends. They ...

Diameter: 8 mm - 28 mm

Goodridge 236 fittings are reusable fittings designed for use with our 200 series hose. The triple seal/double O-ring nitrile, cutter design ensures a secure leak ...

Diameter: 4 mm - 25 mm

... production of fittings. They are manufactured in three types of materials: 316 grade stainless steel, carbon steel and brass. In installations with plastic tubing, the rings will be ...

Diameter: 3 mm - 38 mm

Connection - Pipe connection for cutting ring coupling L series Standard - ISO 8434-1 Application - TE / SN / SC / SN-K / PTFE flexible tubes Material - Steel Surface protection - Zinc-electroplated

Diameter: 21.3 mm - 88.9 mm
Operating pressure: 4 bar - 16 bar

Model: - Compression pipe coupling - Material body: - malleable iron galvanised Connection: - Conical clamping ring - Material seal: - NBR Temperature: - +80 °C - Bending angle: - 3 degrees Pressure: - 16 bars (water) ...

Diameter: 63, 75, 90, 110, 160 mm
Operating pressure: 12.5 bar

- PVC-U = Unplasticised Polyvinylchloride Gaskets - EPDM Manufacture - Injection moulded

Diameter: 2 mm - 40 mm
Operating pressure: 100 bar - 700 bar

... one compression ring, a ferrule, and a tightening nut. The hermetic union between the tube and the body of the fitting is made thanks to the pressure exerted by both rings on the tube ...

Diameter: 6 mm - 32 mm

BSP Male O-Ring Seal JIC / BSP / Metric Fittings Name：BSP Male O-Ring Seal

Diameter: 0.5 in - 2 in

Straight male fitting with fastening ring made in POM.

Diameter: 6 mm - 150 mm
Operating pressure: 25 bar

BSP Pipe Fittings Union Taper Seat Maximum Pressure: - 25 BAR (363PSI) (2.5MPA) CLASS 150 Maximum Temperature: - 200°C (392°F) Tensile Strength: - 350MPA Suitable Applications: - Water, Oil, Gas, Petro-Chemical Product ...

Diameter: 4 mm - 16 mm
Operating pressure: 0 MPa - 1 MPa

... use of fittings either in hot places, or with sparks or fire; c. it is prohibited the use of them if the water temperature exceeds 60ºC. The resin can decompose; d. it is ...

Diameter: 15 mm
Operating pressure: 20 bar

... sharkbite«, G 1/2, for pipe exterior Material Brass CW602N O-Ring Nitrile Cartridge ring Stainless steel 304 Grab ring Stainless steel 316 Alignment ring Acetal ...

Diameter: 3 mm - 38 mm
Operating pressure: 104 bar - 1,030 bar

Bulk's double ferrule compression fittings are ideal for applications that need a reliable tube connection with pressure tight sealing. The layout of the fittings complemented each other as they are made ...

Diameter: 4 mm - 42 mm
Operating pressure: 100 bar - 500 bar

Banjo Tees With Stainless Steel Sealing Ring for DIN 3852 (small) Banjo Bolt must be greased prior to assembly (see General Information Category 1) Thread G: BSP - Parallel

Diameter: 20 mm - 630 mm

Steel Plastic Fittings Coating With Epoxy For Higher Pressure Request Material：Steel and epoxy Product：Fittings Size：20~630 mm or as your request Color：White,black,blue,gray or as special request Standard：DIN ...

Diameter: 0.13 in - 0.5 in
Operating pressure: 400, 630, 315 bar

T-male stud coupling, male thread BSPT, light and heavy duty series

Fittings are brass-made, highly resistant and long lasting. The production is constantly subjected to rigorous tests, to guarantee high quality levels.

Diameter: 105 mm - 300 mm

Diameter: 4 mm - 22 mm
Operating pressure: 0 bar - 150 bar

Universal double cone fittings - 5200 series Areas of application : compressed air, oil, water. Technical features - fittings in brass (no treatment) - maximum working pressure : 150 bar - ...

Diameter: 3 mm - 64 mm

... Hose Fitting Fiat Seal 24° Cone ORing Seal L.T. 24* Cône ORing Seal HT. 60° Cone Seal 74° Cone Seal 90° ...

Diameter: 2 mm - 15 mm
Operating pressure: 0 bar - 60 bar

Material: Nickel-plated brass Fittings with a cutting ring are designed to connect copper pipes and hoses made of plastic. It is recommended to use an internal bush (B 12) if the fitting ...