DIN rail I/O modules

Low cost compact Digital I/O modules with DIN rail mounting 2 wire RS 485 port provided on the pluggable terminal block User-definable Address, Baud rate and Parity through DIP Switch High-Speed Modbus RTU (Slave) communication ...

I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 ...

Input Output Module – 4 inputs Input Output module for home automation, parking systems, access control, … Specifications Power in: 12-24Vdc Main Network: RS485 4 digital-analog inputs 4 single pole relays with common contact ...

The AMRIO series input/output extension modules are used to easily extend I/O signals of control systems. Modules from this series feature both ARION and MODBUS RTU communication protocols – the selection of the required protocol is done ...

16-channel Isolated Digital I/O Module with Timer Main Features - Channels: 16 - I/O Type: 12DI/2DO/2 Timer - Digital Input: Dry Contact: Logic Level 0: GND Logic Level 1: Open Wet Contact: Logic Level 0: +3V (max) ...

IBM Bluemix Ready Analog Input Remote I/O Module Remote analog input module with web RESTful API and MQTT 1 x 10/100Mbps Ethernet port 8 x 16-bit A/D Isolation up to 2500Vrms 1 x relay output Form A or form B relay with contact ...

Multi-Function I/O Module ● 4 Channels Analog input ● 2 Channels Analog output ● 4 Channels Digital input ● 4 Channels Digital output ● All Digital input channels can be used as 32 bit counters ● Support over voltage protection ● ...

The IA-2116-U is a tiny and intelligent 16 Relays module, powered and controlled by any USB port. The IA-2116-U provides both NO and NC (Normally Open and Normally Close) channels, while the relays common line is shared between 8 or 16 ...

> Inputs: 8 PNP, 24V 20mA > Outputs: 4 PNP, 24V 0.8A > Temperatures: the correct functionality of the node has been verified in a temperature range between 0 and 70 ° C > Power supply: 24V (18-36V) - 0.5Adc > Electrical Insulation: ...

Distributed units are I/O peripherals specialized in a single function Connected to the Z-Link bus via optical fiber Enclosed in a IP20 stainless steel container Mounting on DIN. EN 50022 rails (Omega rails) Maximum ...

Power-Supply 9..24 V DC Size 35 x 68 x 82 mm (W x H x T), equals 2 TE Ethernet LAN port TFTP firmware update The LyconSys I/O modules are the optimal solution for controlling analog and digital I/O signals in a network. Our I/O ...

The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog ...

• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output ...

The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, ...

Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ...

FEATURES - 16 optocoupler inputs (3..32V) - 16 semiconductor switches with high-side drivers (5..32V) - 2 counters (32 bit) for pulse, incremental encoder, or pulse-time measurement - supply 7..32V (external) or 5V (internal) - USB ...

Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point ...

-Ethernet 10/100 RJ45 connector for interfacing to CPU or network -48 or 24 channel high-current TTL digital I/O lines -Compatible with industry standard I/O racks such as Grayhill, Opto 22, Western Reserve Controls, etc. ...

I/O remote extension modules can provide customers with more choices and more topology.

The NA2000 digital output expansion module can be used to connect devices such as solenoid valves, contactors, low-power motors, lights, and motor starters. Technical performance index Up to 16 output channels. The output mode ...

The module has a compact aluminium housing and offers the possibility for top hat rail mounting. The interfaces are quickly and con­ve­nien­tly avail­able on the front panel. Using the 3-wire connection technology, all sensors can be ...

The M500DMR provides supervision of two input circuits respectively from external switch devices and also provides two unmonitored single pole volt-free changeover contacts for external devices. Input channels are capable of both latched ...