Direct-operated solenoid valves

DN: 2.3, 0.8, 1.6 mm
Voltage: 24 V
Temperature: 0 °F - 149 °F

... -DP: All body ports are M5. • A-DG: G 1/8 male output port for mounting directly to suction cups, air cylinder, or the pilot port of a larger valve. Ports 1 and 3 are M5.

DN: 0.125 in
Voltage: 230, 24, 115, 48 V
Temperature: -10 °C - 130 °C

Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 0.25, 0.125 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 130 °C

Seals: NBR, EPDM, FPM, PTFE Ambient temperature: +55°C max Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 0.125, 0.25 in
Voltage: 115, 230, 24 V
Temperature: -10 °C - 130 °C

Internal parts: stainless steel Seals: NBR, EPDM, FPM, PTFE Viscosity: 21 mm2/s max. Response time: 10 to 20 ms Duty cycle: continuous (ED100%) Cycling rate: 1000 cycles/min max Electrical protection: IP65 (with plug to ISO 6952 ...

DN: 1.8 mm - 6 mm
Voltage: 12 V - 24 V
Temperature: -10 °C - 80 °C

Application : Air, water, gas Size : 1/8", 1/4" Direct acting; 3/8"…2"Operated Working Pressure : 0…16 Bar (1/8", 1/4") / 0,5…16 Bar (3/8"...2" ) Core, Tube :Stainless Body : Brass Seal ...

DN: 0.375 in - 1 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 80 °C

... series solenoid valves is direct operated and full body design. That is supply direct acting solenoid valve up to max ...

DN: 0.125 in - 2 in
Voltage: 12 V - 230 V
Temperature: -10 °C - 160 °C

The S4010 (Normally Close) , S4011 ( Normally Open ) Series features solenoid valves designed for applications in fuel oil, burners, etc. These valves are built with stainless steel ...

Voltage: 12, 24, 220 V
Pressure: 100 bar

Solenoid valves (solenoid) according to the standard NG06 (cetop 3) or NG10 (cetop 5), are an electromechanically operated valve. Solenoid ...

Pressure: 210 bar

Consists of cartridge valve, block and solenoid coil.

DN: 20 mm
Voltage: 220 V
Temperature: -20 °C - 65 °C

Advanced craft and reliable action; Diaphragm of main valve adopts imported special rubber, with high anti-corrosion and resisting low temperature at -20℃ Coil parts adopt imported enamelled wires in F class with excellent ...

DN: 20 mm
Voltage: 12 V - 240 V

D20 solenoid valve is the product with the latest design of our factory, the body of this electromagnetic valve is shaped by adopting brass forging, having the characteristics and use ...

DN: 250 mm - 250 mm
Voltage: 12 V - 240 V

olenoid Valve D25 is the product with the latest design of our factory, the body of this electromagnetic valve is shaped by adopting brass forging, having the characteristics and use as follows: 1. compact ...

DN: 1 mm - 8 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C

Series 8/100 - High-pressure solenoid valve for hydrogen, pneumatically operated 2/2-way valve, with piston, direct pressure operated ...

DN: 0.5 mm
Voltage: 230, 24 V
Temperature: -50 °C - 85 °C

High pressure solenoid valve for hydrogen refuelling - 1000 bar - DN 0.5 - 2/2 NC - ATEX In our range of specialised solenoid valves for hydrogen dispensing, this ...

DN: 0.5 mm - 6 mm
Voltage: 12 V - 230 V
Temperature: -40 °C - 80 °C

Series 55 - Solenoid valve for high pressure and hydrogen applications 2/2-way direct operated piston valve - ATEX 2/2-way solenoid ...

Voltage: 22 V - 26 V
Temperature: 5 °C - 50 °C
Pressure: 0 MPa - 1.1 MPa

... external pilot air specification, controlling air pressure from 0MPa is possible. Body height is 42mm. 9 valve types Easy replacement of input /output port The ...

Voltage: 24, 100 V
Temperature: 5 °C - 50 °C
Pressure: 0.2 MPa - 1.1 MPa

... area of 18mm2 for 16mm width valve is secured. Various valve types are available. 2 selections of connector lead-out direction: (Top and Side) Vacuum-operatable 2/3 Port Solenoid ...

Voltage: 22 V - 110 V
Temperature: 5 °C - 50 °C
Pressure: 0.2 MPa - 1.1 MPa

Standard type Solenoid Valve designed to place importance on basic functions. Equipped with push & lock manual button as standard specification. It enhances operational efficiency ...

DN: 8 mm
Voltage: 6 V - 240 V
Temperature: -10 °C - 50 °C

Series of spool valves with hard anodized aluminum body, with static seals and high flow for NAMUR interface mounting. Available according to ATEX 2014/34/EU, in calssifications Ex nA, Ex ia, Ex dm, Ex d, Ex mb. For ...

DN: 8 mm
Voltage: 22 V - 28 V
Temperature: -25 °C - 70 °C

Series of valves with NAMUR interface in stainless steel AISI 316L, especially suitable for food, chemical, pharmaceutical, OIL&GAS and mining industry. Conforming to 2014/34/EU Directive, certified II 2Gc IIB T5 / II ...

Temperature: 180 °C
Pressure: 30 bar

- Temperature-controlled 2/2-way solenoid valve - Control thermostat with high-temperature limiter and low-temperature alarm contact - With thermally insulated cover - On a heat-decoupled ...

Voltage: 115 V - 230 V
Temperature: 180 °C
Pressure: 30 bar

- Temperature-controlled 3/2-way solenoid valve - Control thermostat with high-temperature limiter and low-temperature alarm contact - With thermally insulated cover - On a heat-decoupled ...

DN: 1.2, 1.5 mm
Voltage: 24, 12 V
Temperature: -10 °C - 50 °C

Direct control valves 2/2 or 3/2 are used for operation of pneumatic cylinders with little bore size or for auxiliary functions. Available in the version with solenoid ...

DN: 10 mm - 20 mm
Voltage: 230, 24 V
Temperature: 50 °C

• Direct-acting thermoplastic valve • Fast change • Core tube sealed by PTFE bellows • Independent of compressed air supply • Wide area of ​​application • Pilot ...

DN: 2 mm - 8 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C

Direct action with PTFE • PVC, PTFE materials • FKM special seals, EPDM seat Function • Closed without current (NC) • Directly controlled

DN: 1 mm - 2.5 mm
Voltage: 230, 24 V
Temperature: 0 °C - 50 °C

• Direct action with insulating diaphragm • PVC, PTFE materials Function • Closed without current (NC) • Directly controlled

DN: 25 mm - 150 mm
Voltage: 12, 24, 9, 110, 220 V
Temperature: 70 °C

... RAF 33P electric valve is a Normally Open (N.O) line pressure hydraulically actuated. The RAF 33 (N.O) valve opens when 3-W electric solenoid valve is de-energized. The ...

DN: 0.125 in - 2 in
Temperature: -10 °C - 140 °C
Pressure: 0.1 bar - 20 bar

– Positivley controlled – Pilot control Electrical connection For PG9/ PG11 connector in line with ISO 4400 Protection class IP65 When using a connector Materials Brass housing (CW617N) Valve ...

DN: 1, 0.5 in
Voltage: 110, 24, 12, 230 V
Temperature: -10 °C - 60 °C

Gas Solenoid Valve Valve Information > Port: - Refer below technical data sheet (Available BSP) > End Connection: - Screwed > Body Material: - Aluminum Pressure Die Cast > Diapharagm: ...

DN: 0.25, 0.375, 0.5, 0.125 in
Voltage: 24, 12, 230, 110 V
Temperature: -30 °C - 180 °C

Port: - Refer below technical data sheet (Available BSP / NPT) End Connection: - Screwed Body Material: - SS ASTM A351 Grade CF8 / CF8M, Forged Brass, Aluminium > Media: - Air, Chemical, Gas, Oil, Steam, Hot Water, Oil. > Main ...

DN: 3.18 mm - 12.7 mm
Voltage: 110, 24, 12, 230 V
Temperature: -30 °C - 180 °C

Port: - Refer below technical data sheet (Available BSP / NPT) End Connection: - Screwed Body Material: - SS ASTM A351 Grade CF8 / CF8M, Forged Brass, Aluminium > Media: - Air, Water, Chemical, Gas, Oil, Diesel, Kerosene, LPG. > ...

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 2 bar - 8 bar

Expressly developed for high-density sorting and recycling applications, the compact 820 ISD Series offers outstanding characteristics in terms of response time and life expectancy. The integrated 24 VDC miniaturized speed-up driver with ...

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 5 bar

The 580 Series solenoid multi-valves are 2/2 NC type. The research about materials and new technological solutions allowed the realization of a shutter solenoid multi-valve ...

Voltage: 24 V
Temperature: -10 °C - 50 °C
Pressure: 0 bar - 8 bar

The 840 Series Pneumatic Solenoid Valves is of the 2/2 NC Type. Its innovative and advanced design gives the realization of a shutter valve with a very smooth operation ...

DN: 0.05 mm - 2 mm
Voltage: 5 V - 24 V
Temperature: 0 °C - 50 °C

Orifice size from 0.05 to 2 mm. Media: gas or liquid Pressure range from vacuum up to 70 bars Applications: flow and pressure regulation, Venturi, vacuum Manifold mount, barb or flange on request Stainless steel or brass, FPM, EPDM, ...

DN: 4.5 mm
Voltage: 5 V - 24 V
Temperature: 5 °C - 50 °C

... proporional solenoid valve. Designed primarily for flow and pressure regulations of non-corrosive gases. In a compact size of 17 mm diameter, it can regulate up to 150 l/min air at 2.5 ...

DN: 0.8 mm - 4 mm
Voltage: 12 V - 48 V
Pressure: -1 bar - 12 bar

General purpose high flow proportional valve. Orifice up to 4 mm. Versatile seal (NBR, FPM, EPDM, PTFE, etc...) and body material (stainless steel, brass, Aluminum or plastic) available to adjust to the gas or liquid.

... standard, the Explosion-proof solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to ...

... , the 5 way 2 position solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to its unique ...

... , the 3 way 2 position solenoid valve series can be installed directly on the air source interface of single acting or double acting pneumatic actuators. Due to its unique ...

DN: 9 mm
Voltage: 12 V - 240 V
Pressure: 210, 100 bar

Solenoid Operated Directional Valves, Actuated Directional Spool Valve, Directional Control Spool Valve CML High Back Pressure Type Solenoid ...

DN: 6 mm
Voltage: 12 V - 240 V
Pressure: 210, 100 bar

Solenoid Operated Directional Valves, Solenoid Actuated Directional Spool Valve, Directional Control Valves CML solenoid ...