Drill bits

Diameter : 20 mm - 54 mm
Length: 40 mm - 216 mm

TungSixDrill is the fi rst indexable drill in the world to adapt double-sided inserts with 6-cutting edges. The 6-cutting edges reduce the number of inserts consumed.

Diameter : 5 mm - 11.5 mm
Length: 70.5 mm - 120.5 mm

... includes tools for bore diameters from 5.0 mm to 11.5 mm. They are available in versions with a drilling depth of 1xd or 2xd. The corresponding drill insert bits are available in 0.1 ...

Diameter : 16 mm - 38 mm
Length: 50, 56, 60, 70 mm

... Highly engineered pocket seat design for high stability even in critical operations Uses and application Drilling Drilling: Cross-Hole Drilling Drilling: Inclined Entry Drilling: Inclined Exit Drilling: ...

Diameter : 0.2 mm - 1.49 mm
Length: 25 mm

With WhizDrill we have put together a range of micro drills that start at 0,1 mm and go up to 3 mm. These can be ordered to any geometry and shank sizes in stock are 1,00 mm, 1,50 mm, 2,00 mm, 2,50 mm, 3,00 mm, 1/8’ and ...

Diameter : 0.5 mm - 10 mm
Length: 38 mm - 118 mm

Self-centering twist drills with reinforced shank, 6.5xD1 cutting length. High-performance tools developed for the drilling of short chip materials.. TiAlN coating improves tool life in ferrous materials.

Diameter : 10 mm
Length: 21.4 mm

Aludrill Ø 9.0 mm with flat finish for M10 cold forming tap PART SPECIFICATION THREAD SIZE - M10 FINISHING - Plane surface SHAFT DIAMETER - 14.0 mm MATERIAL/MACHINE PARAMETERS MIN. MATERIAL THICKNESS - 1.0 mm MAX. MATERIAL ...

Diameter : 3 mm - 16 mm
Length: 46 mm - 115 mm

• facet point grind • main cutting edge form straight • optimised cutting edge geometry structural and case hardened steels • free-cutting steels, heat-treatable steels • alloyed steels up to 1200 N/mm² • cast materials • bronze, brass ...

Diameter : 4 mm - 12 mm
Length: 12 mm - 96 mm

... with polished flutes New 3 Flutes Solid Carbide Drill for Increased Productivity As part of TaeguTec’s new SFEED-TEC series of technologically advanced cutting tools, the SOLID-3-DRILL line increases ...

Diameter : 2 mm - 16 mm
Length: 49 mm - 162 mm

... deburring process with no JINGASA left Almost same tool life as multipurpose Drill Reducing the burr even near of the end of tool life Realizes almost same tool life as multipurpose drill even burrless

Diameter : 0 mm - 6.4 mm
Length: 0 mm - 144 mm

... action Shorter than the top competitor's bit for better access to tight spaces between studs and joists Perfect for drilling 2 IN and 4 IN joists Augers have self-feeding screw point that ...

This AMECA hand-operated installation tool drilling bit is the ideal unit to use with applications that require a commercially-available standard drill bit. All AMECA ...

Diameter : 0.5 mm - 20 mm
Length: 50 mm - 150 mm

DRILLING AND THREADING FOR THERMOPLASTICS, CURABLE PLASTICS AND ELASTOMERS The requirements for synthetic compo- nents rise continuously. The quality of drills is especially concerned. In the series ...

Diameter : 3 mm - 10 mm
Length: 16 mm - 38 mm

Drill bits for wood HSS-G with 1/4" Hexagon Drive

Diameter : 10 mm

Milling cutter bodies Multi-purpose cutter with indexable inserts With POKOLM's insert cutter system, tools and rotating inserts are perfectly matched to form a comprehensive range of products capable of dealing with almost any condition. Thanks ...

Diameter : 0.01 mm - 0.05 mm
Length: 40 mm

... times longer than its diameter, and is finished with a Mugen micro coating. It also has a special thin film coating for Micro Drill operations on steel materials including stainless steel items. The cutting edge also ...

... wide range of carbide drills for processing diverse materials. With drill diameters in increments of 0.1 mm (up to diameters of 20 mm) and with drill bit lengths of 3xD ...

Diameter : 2.5 mm - 3.7 mm
Length: 12, 17 mm

Insert drills, Pilots. Counterbores, Countersinks and Toolholders Part No. - eg. 3.2 : 01B-3.2

Diameter : 0 mm - 13 mm

Diameter : 1 mm - 10.9 mm
Length: 40 mm - 95 mm

... 90 and 140-degree point angle, the tool's performance is maximized. • Implements stable drilling with a flute groove design considering chip evacuation and drill rigidity.

Diameter : 12 mm - 19.99 mm

The QUICKDRILL is a drill with a new locking mechanism designed to withstand unstable machining environments. It performs well in unstable applications such as interrupted cuts and asymmetrical holes. Additionally, ...

Diameter : 7 mm - 25 mm

Specification:7XD 12XD 15XD 20XD 25 XD Description Carbide Deep Hole Drills Material :Carbide K40 Coolant: Inner/Out

... PCD drills are designed and manufactured in-house by Tommasin Utensili for machining in the fields of precision mechanics, eyewear, automotive sector, aeronautics/aerospace, energy, medical, micro watchmaking and other. Our ...

Diameter : 0.13 in - 1.38 in

Step Drills Step drills are ideal for drilling repetitive holes by electrical contractors, sheet metal workers, and auto mechanics. HSS drills are made of high speed ...

... or automatic machines. This arrangement contains bores for blind drilling cavities or high-powered alloyed steel, tungsten carbide and polycrystalline diamond. The heavy-duty body drills in tungsten ...

Diameter : 3.2 mm - 34.9 mm
Length: 6.4, 9.5 mm

LENOX VARI-BIT® STEP DRILL BITS 2X LONGER LIFE* Infused high speed steel offers extreme wear resistance. 50% FASTER STARTS** PowerDrive™ tip for faster penetration and less walking PRECISE, ...