Elbow fittings

Diameter: 90 mm - 225 mm

The direction change piece with “bite” for your piping system - installed safely and quickly The REINOGRIP bends can be installed quickly and safely. This way you save valuable time as well as installation costs. Even without internal ...

Diameter: 0.19 in - 2 in

The new KA range of fittings and ferrules have been released to enhance the current range of KA high performance hoses. The new range has been fully tested and validated in our Automotive test laboratories at 204°C (400°F) ...

Diameter: 17 mm - 600 mm

90° and 45° bends by Velo Acciai are made of AISI 304 or 316 stainless steel and are available in the electrounited version (glossy or polished version) or without welding. Technical features Suitable for pipes ranging from 17 to ...

Diameter: 20 mm - 200 mm
Operating pressure: 15 bar

... applications. Fire resistance Fittings are all in aluminium, non-flammable and with no propagation of flame. Materials piping is made of 6063-T5 calibrated alloy aluminium and is powder coated outside, pipe, ...

Diameter: 80, 100, 150 mm
Operating pressure: 150, 250 psi

DUCKFOOT BEND 90º Technical characteristics: Body - ductile cast iron EN-GJS-500-7 According to DIN EN 545 standard Epoxy coating RAL5015, at least 250 μm thickness Drilling of flanges: PN10/16, starting from DN200 - PN10 WRAS,ACS ...

Diameter: 32 mm - 315 mm

UPVC fittings without heavy metals, used in all security for systems of waste waters within the buildings. Field of application Waste water conducts within buildings Ref. standards UNI EN-1329, NF EN-1329 Dimensional ...

Diameter: 15 mm - 350 mm

... manufacture all the standard fittings as found in ASME B16.5 as shown in the dimension table below along with other fittings such as short branch tees, instrument tees, reducing flanges etc. We also ...

... Buttweld elbows below 24 inches in diameter are produced by cutting, heating and bending seamless steel pipes; pipe elbows of larger sizes are manufactured, instead, from welded pipes or steel plates. The ...

Diameter: 80 mm - 150 mm
Operating pressure: 16, 10 bar

According to DIN 28650 and DIN 28603 Attention! At pressure level PN 16 drilling changes from DN 200! Features Special coatings: Coating inside and outside Epoxy redbrown for sewage water Coating inside and outside ...

Diameter: 4 mm - 60 mm

Connection - Sealing head 60° outside cone with BSPP nut (G) Standard - ISO 8434-6 Application - TE / SN / SC / SN-K / PTFE flexible tubes Material - Steel Surface protection - Zinc-electroplated

Diameter: 0.125 in - 24 in

... stainless alloys or carbon steel to customers around the world. Our stock and fabrication includes seamless butt weld (BW) fittings from 1/8 “to 12” and flanges from 1/4 “to 24”. The range of schedules (Schedule) covers ...

Operating pressure: 10, 16 bar

Our assortment of threaded screw fittings ranges from connectors, double threaded nipples, counter nuts and bushings to reducing nipples, pipe double nipples, hose sleeves and pivoting bushings and up to bulkhead fittings, ...

Diameter: 0.125 in - 2 in

Our hydraulic fittings are available in steel (treated against according to the standards in force) standards) as well as stainless steel, brass and titanium. Our fittings ensure any form of form of ...

Food Grade Bend, industrial bend, clamp bend , welding bend , 90° bend, 45° bend etc.

Product Speicifactions ·Material: Carbon steel ,Stainless steel& Brass ·Type: Elbow adaptor, Tee and Cross ·Plating: Free to Chromium 6 ·Meets or exceeds SAE/ISO standard

ALEMITE 1⁄4”-28 Taper Thread Fittings are used on most cars and trucks, as well as many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1⁄4”-28 UNF, Class 3B, straight threaded holes ...

Diameter: 6 mm - 18 mm
Operating pressure: 0 bar - 15 bar

The SIRIT-RTC rapid connection joints have been designed for use with 11/12 (Rilsan), 10/12 polyamide or elastomeric polyester (Hyltrel) tubes. The tube tolerances and characteristics must strictly comply with the following rules: DIN ...

Diameter: 12 mm - 100 mm

Material: Brass / Brass with nickel Plated ( Furnished with insulating Liner) Protection Degree: IP67 Note:One end is connected to the conduit and the other end is connected to the chest, Electricity machine and other equipment in 90 ...

Diameter: 0.75, 1 in

The TDW 45°swivel is designed for gasoline self-service applications where easy nozzle and hose handling is important for customer convenience. The 45°is installed between the nozzle and hose to reduce strain, providing flexibility so ...

Diameter: 1.33 in - 6 in

UHV rated to 1x10-13 High temperature rated to 450ºC OFE Copper or optional Viton® elastomer gaskets Clearance bolt holes Conflat® compatible design Standard matte finish Radiussed tube Both flanges rotatable

Diameter: 16 mm - 400 mm
Operating pressure: 0 bar - 16 bar

Series of fittings designed for conveying fluids under pressure with a metric solvent weld jointing system Standards: EN ISO 1452, EN ISO 15493, EN 727, DIN 8063

Diameter: 8.1 mm - 16.1 mm

Surface Treatment Options 1.White Zinc Plated 2.Black Zinc Plated 3.Polished 4.lectropolished

Diameter: 80 mm - 250 mm

Bends for ventilation are produced in diameters range 80 mm to 1600 mm of galvanized, aluminium and stainless steel sheet at 15, 30, 45, 60 and 90 degrees angles. It is recommended to choose the version with EPDM seals to ensure ...

Diameter: 4 in

... gelatinous proppant (sand) slurry used at hydraulic fracturing sites Description Male hammer union x female hammer union 45° elbow Features No welds or pipe threads to deteriorate to cause premature leakage ...

These universal joints from Chinabase Power Transmissions are made from various materials like steel, stainless steel, aluminum, brass, and the like. Units are then anodized by zinc, nickel, or by the customer's choosing. Personalized ...