Electric actuators

Translation-rotation unit •Adjustable speed •Simple and accurate positioning •Compact •Simple installation •Light

Stroke : 35 mm - 3,754 mm
Force: 420 N - 1,000 N
Torque: 0.1 Nm

Spindle, toothed belt or direct drives with metal strip cover The linear actuators with metal strip cover are an extension of the standard programme. The metal strip offers protection against incoming dirt or particles ...

Stroke : 297 mm - 537 mm

rotaryARM The swivel arm module rotaryARM in connection with linear units is a very fast pick-&-place system for all tasks that require quick and precise automation solutions. It has a range of 297, 399 or 537 mm.

Stroke : 14 mm - 271 mm
Force: 6 N - 92 N
Speed: 5.6 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Stroke : 27 mm - 309 mm
Force: 51 N - 780 N
Speed: 5.9 m/s

The ServoTube Actuator is an optimal solution for industrial position control. Faster than a ballscrew with the clean reliability of a linear forcer. ServoTube is a cost-effective alternative to air cylinders in applications ...

Stroke : 33 mm - 318 mm
Force: 137 N - 1,860 N
Speed: 5.3 m/s

THE ST SERIES IS NOTABLE FOR: » Tubular linear motor » 3 phase technology » Actuator, components and module » High power density » High efficiency » Highly dynamic acceleration » Very long life-time » Freedom ...

Stroke : 0 mm - 950 mm
Force: 10, 20, 30, 40 kN
Speed: 130 mm/min

... environments. Operations: An dc electric motor drives via a gear a spindle. A stainless steel piston rod runs the linear move. To avoid a mechanical collision at the end positions of ...

Stroke : 100 mm - 200 mm
Force: 300 N - 600 N

L4.202 Linear actuators RA 60 K L4.202 Linear actuators RA 60 K max. lifting force 300 to 600 N stroke from 100 to 200 mm version with limit switches or stroke measuring system max. ...

Stroke : 100 mm - 600 mm
Force: 1,000 N - 6,000 N
Speed: 0.01 m/s - 0.04 m/s

max. lifting force 1000 to 6000 N stroke from 100 to 600 mm version with limit switches or stroke measuring system

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 156 mm/s

The LD1000C linear actuator is ideal for the digitalization and control of vehicles, machines and building sections. It is extraordinarily robust and strong: The thrust force is up to 10,000 N and the stroke length reaches ...

Stroke : 15 mm - 1,000 mm
Force: 10,000 N
Speed: 130 mm/s

... and resistant linear actuator The LD1000E has a robust housing made of die-cast aluminium with a stable casing made of anodized aluminium profile and a lift pipe made of stainless steel. Inside, there ...

Stroke : 100 mm - 600 mm
Force: 6,000, 4,000 N
Speed: 0 m/s - 0.02 m/s

Intelligent linear actuator with high force The LD600 linear actuator is a very smart and powerful actuator that has been specially designed for indoor and outdoor use. The linear actuator ...

Stroke : 12, 24 mm

... by specified software. It shall be used together with controller and controller power supply. Note: The motor of this product is exposed, the temperature of the motor increases during ...

Force: 20 N
Speed: 0.3 mm/s - 100 mm/s

The size 6 [14mm] hybrid linear actuator occupies a mounting footprint of 14mm square but provides over 20N of continuous thrust force. Size 6 hybrid stepper linear actuator ...

Stroke : 20 mm - 150 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 20mm series is compact and reliable structure of linear solution. DLM 20mm Series is good precision, ...

Stroke : 20 mm - 250 mm

Based on DINGS' platform products, high precision of lead screw linear actuator and self-developed simple linear module, DLM 28mm series is compact and reliable structure of linear solution. DLM 28mm Series is good precision, ...

Force: 100, 200 N

Description High performance brushless motor RS232 service interface for easy setup Real absolute multiturn encoder Technical details Output/Interface Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCat, CANopen

RD12A rotary actuator with integral motor brake Job buttons Service interface Available with Profibus, Profinet, Powerlink, Modbus, Ethernet-IP, EtherCa or CANopen interface

... controller & encoder Closed loop position control Absolute multiturn encoder Boot loader via CAN RD53: Version with integral motor brake

Force: 300 N - 1,390 N
Torque: 5.5, 2.5 Nm
Rod length: 500, 1,000, 300, 800 mm

The “light option” for simple manual adjustments Aluminium screw • Low-weight option thanks to aluminium screw and plastic slide bearin Screw cover •An elastic plastic sealing lip protects the screw Choice of guiding tube clear ...

Stroke : 0.2 mm - 300 mm
Force: 8 N - 5,500 N
Torque: 1.5 Nm - 170 Nm

... • Units for light to heavy moving applications • Manual and motor-driven adjustments supported • Different sizes can be combined • Comprehensive range of accessorie Options: • Corrosion-protected variant E-II-stainless ...

Stroke : 0.2 mm - 300 mm
Force: 100 N - 14,000 N
Torque: 20 Nm - 1,100 Nm

The robust twin tube unit – compensates for high bending moments during hand and motor-driven adjustments Screw with choice of slide bearing or ball bearing •Ideal for use in environments with fine dust/abraded particles due to ...

Force: 3,400, 22,600, 14,400 N
Torque: 898.35, 428.4, 67.15 Nm
Speed: 3 m/s

Minimize the volume in your design with our lifgo® SVZ! • Helical Gearing • Super Silent • Tight Operating Parameters • High Quietness • Highest Precision • Simple Installation Application Example: lifgo® with helical gearing ...

Stroke : 305 mm
Force: 67 N
Torque: 1.7 Nm

... is customized through a variety of leadscrew resolutions, available free-wheeling and anti-backlash nut selections, stepper motor configuration options, and optical encoder line counts. - Compact co-axial design enables ...

Stroke : 9 mm - 200 mm
Force: 2 N - 45 N

The Size 8 by Haydon Kerk Motion Solutions is a 21mm stepper motor linear actuator. Size 8, 21000 series linear actuators are available in three designs - captive, non-captive and external ...

Stroke : 12.7 mm - 250 mm
Force: 15 N - 90 N

The Size 11 by Haydon Kerk Motion Solutions is a 28mm stepper motor linear actuator. Size 11, 28000 series linear actuators are available in three designs - captive, non-captive and ...

Stroke : 25, 35, 50 mm
Force: 140 N
Speed: 0.01, 0.01 m/s

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Stroke : 44, 29 mm
Force: 140 N
Speed: 0.01 m/s

This new and highly reliable one-of-a-kind piston is equipped with potentiometric linear feedback that allows its stroke to be controlled in both directions and in a variety of ways: – Proportional movement – Scheduled ...

Force: 300 N
Speed: 0.04, 0.07 m/s
Ambient temperature: -5 °C - 60 °C

... sector in general where robustness and high reliability over time is required even in harsh environments. This type of linear actuator differs from many others in its particular robustness, which is suitable for overcoming ...

Stroke : 25 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-25-SV Price: $ 540.00

Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-DW-75-SV-PH Price: $ 938.00

Stroke : 75 mm
Force: 150 N
Speed: 600 mm/min

DL15 Series Linear Actuators Family: DL15 Series Linear Actuators Model: DL15-75-ST-C-PX Price: $ 752.00

Stroke : 50 mm - 400 mm
Force: 3,000, 4,000, 6,000 N
Speed: 4 mm/s - 21 mm/s

... Built-in electrical limit switch • Weight: About 2kg（different stroke length and installation dimensions with different weight） • Static bending moment: lateral loads are not allowed. JC35L30 is a durable yet quiet ...

Stroke : 50 mm - 400 mm
Force: 8,000, 10,000 N
Speed: 4 mm/s - 10 mm/s

... : gray IP grade: Max. IPX6 Stroke length: Patient lift version: 50-400mm(in steps of 4mm) Standard version: 50-250mm (in steps of 4mm) • Installation dimensions: Patient lift version： L=S+260（50≤S≤300，with ...

Stroke : 50 mm - 300 mm
Force: 6,000 N
Speed: 4.5 mm/s - 9 mm/s

... anti-pitch option • Built-in electric limit switch • Weight:2.8kg(based different stroke) • Static bending load: no bending load JC35L23-QR is a compact and powerful actuator. ...

Torque: 112 Nm - 7,200 Nm

... designed and built by Technai, which can support and incorporate the functional elements. Parts they are composed of A torque motor with a cooling jacket, the bearing that is designed and built by Technai, which can ...

Rod diameter: 200, 260 mm

... components of a rotary axis for a machine tool. A torque motor with a cooling jacket, the support bearing with an integrated high precision absolute encoder and hydraulic clamping device The electric ...

... to be able to replace traditional mechanical systems, such as indexing with cams or servomotors with gearbox. A torque motor with a cooling jacket, a support bearing with encoder and on request, a hydraulic brake ...

Stroke : 10 mm
Force: 29.5 N
Motor power: 20 W

AQUARIUS is an actuator designed for applications where force, throughput, durability and reliability are required – all in a compact form factor. It is ideal for applications that require an independent Z-axis for testing ...

Stroke : 10 mm
Force: 31.4 N
Motor power: 20 W

AQUARIUS ST is the latest generation of our short stroke actuators specifically designed for “Test & Scan” turret applications. This series offers improved force control repeatability and higher throughput, which ultimately ...

Stroke : 10 mm
Force: 11.5 N
Motor power: 12.4 W

Introducing TUCANA, an actuator that fulfils the requirements of applications that demand force, throughput, durability and reliability, all in a compact form factor. It is particularly suitable for independent Z-axes ...

Rotation angle: 360 °

... - Stepper or servo motor driven - Unlimited rotation - High speed 100 RPM (with servo motor) - Home switch - Up/Down motor mount option

Stroke : 100 mm - 1,050 mm
Force: 75, 85, 150, 300 N
Speed: 250, 500, 800, 1,000 mm/s

Automation Series linear motorized modules integrate recirculating ball bearing system with a precision ball screw in a compact frame that meets the speed and precision requirements of modern production machinery. The ...

Stroke : 100 mm - 2,000 mm
Speed: 0.6, 0.2 m/s

... stepper or brushless servo motors. Stroke mm 100 - 2,000 Ball screw lead mm 5, 10, 20, 25 Motor mounts size   Nema17, Nema23,  Nema34 M60, M80 Motor type   Stepper Servo/encoder 4000ppr Repeatability ...

Stroke : 50 mm - 500 mm
Force: 1,500, 2,500, 4,000 N
Speed: 5, 10, 20 mm/s

Designed and manufactured in Sweden, the Gammadrive actuator is the optimal choice for light industrial and furniture applications. With the small motor housing and the multiple mounting options to choose ...

Torque: 12, 18 Nm
Motor power: 20 W
Rotation angle: 95 °

-ATEX / IECEx certified -Integrated connection box -Optional fail-safe position / return spring -Optional control / feedback 0…10 V; 4…20mA -IP66, very high corrosion resistance, weatherproof -For use in zones 1, 2, 21, 22

Torque: 12, 18 Nm
Motor power: 20 kW
Rotation angle: 95 °

-Integrated connection box -Optional fail-safe position / spring return -Optional control / feedback 0…10 V; 4…20mA -IP66, very high corrosion resistance, weatherproof