Electrically-actuated valves

DN: 0.5 in - 6 in
Pressure: 230 psi

... solids. Type-21/21a ball valves are well suited for a wide variety of fluid flow applications. True Union ball valves can be lifted from the line, without having to move the piping, simply by loosening ...

DN: 15 mm - 50 mm
Pressure: 25 bar
Temperature: -20 °C - 100 °C

... ...max. 90° Mounting position : vertical to horizontal (in relation to shaft) Materials Case : brass Valve ball : brass Valve shaft : brass Valve shaft gasket : NBR Gasket : PTFE ...

The control valves with actuator are primarily used within the industrial plants to maintain operating conditions such as flow, pressure, temperature and liquid level by fully or partially opening or ...

DN: 50 mm - 600 mm
Pressure: 16, 10 bar
Temperature: 100 °C

Resilient-seated, lug-type butterfly valve for flange mounting to pipelines; disk with centric bearing; suitable for use in sea water applications. With replaceable liner mounted on a vulcanised seal carrier ring, and ...

DN: 50 mm - 1,500 mm
Pressure: 400 bar
Temperature: -196 °C - 450 °C

Trunnion mounted split body ball valves, double block and bleed function, for oil and gas standard and severe applications The FCT Split Body trunnion mounted ball valves have been designed for severe ...

DN: 25 mm - 320 mm
Pressure: 75 mbar - 1,000 mbar
Temperature: 35 °C - 150 °C

Field of application: Semiconductors, FPD / CVD systems and industrial processes.

DN: 3 mm - 8 mm

... Chalwyn SVX Electric Actuated Butterfly Air Intake Shutoff Valve is available with three different methods of electric actuation described below. The ...

DN: 0.25 in - 3 in
Pressure: 41.4 bar

1/4 to 3 in. (8 to 80mm) Description: Series EMVII-6400-SS Electric Motor Valves are used in commercial HVAC zone control and light industrial applications. It consists of a bronze body construction, ...

Pressure: 50 bar - 1,200 bar
Flow rate: 50 l/min - 600 l/min

... Dimensions: 321x110x110 mm •Weight: 17.8 kg SPECIFIC FEATURES •Bypass valve •Consumer shut-off valve

DN: 0.25 in - 2 in
Temperature: -10 °C - 50 °C

A-EAL-BV3G Voltage 24V/DC ; Protection IP 65; Temperature –10°C bis +50° C BV3G: 3-piece ball valve with BSP parallel thread to DIN / ISO 228. Overall length to DIN 3202 Part 4-M3; (exceptions: "**"). L (= 24V)

DN: 20 mm - 110 mm
Pressure: 16 bar
Temperature: 10 °C - 60 °C

Industrial Series Ball Valve with reversible electric actuator multi-voltage Electronic torque control, with limitation of maximum torque Anti-condensation heating resistor Automatic ...

DN: 15 mm - 150 mm
Pressure: 16 bar
Temperature: -60 °C - 200 °C

... Range - -60 °C to +200 °C (-75 °F to +400 °F) •Certifications - EU Pressure Equipment Directive 2014/68/EU, German Clean Air Act (TA-Luft), SIL

DN: 40, 20 mm

The BERMAD Landscape 200 Series plastic control valves range from ¾” to 2” in size, in either globe or angle pattern. These control Pressure Reducing Solenoid Control Landscape Valve is a Electric ...

DN: 40 mm - 300 mm
Pressure: 10, 16 bar
Temperature: -15 °C - 130 °C

... B24: Mono 230V/50Hz Disc material Ductile iron GGG50 coated Connection between flanges Operating system BERNARD electric actuator

DN: 0.5 in - 8 in
Pressure: 0.5 bar

Gas shut off valves N.C. with manual reset. Normally closed: must be continuosly powered to allow the gas flow. Power consumption: 19VA. Max working pressure 500mBar.

DN: 8 mm - 200 mm
Pressure: 100, 16 bar
Temperature: -50 °C - 280 °C

... manufacturing of our 2-piece and 3-piece ball valve allow a vacuum capability of at least 10-3 mbar (0,75 10-3 Torr). PED directive According to Pressure European Directive (PED) 97/23/ CE, all our ball valves ...

DN: 0.75 in
Pressure: 16 bar
Temperature: 0 °C - 120 °C

... industrial applications. Elephant electric actuated valves use power-to-open and power-to-close, stays in the last known position with loss of power. The actuator will rotate the output ...

DN: 50 mm - 1,500 mm
Pressure: 1, 1.6, 2.5 MPa

... for changes in temperature and pressure Installable Accessories Solenoid Valve Limit Switch Air-Filler Regulator Pneumatic Valve, Fast Vent Valve, ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 0 °C - 60 °C

ball valve, ideal for heavy duty applications, chemical applications and water treatment, can be actuated with standard electric actuators using the dedicated kit. The mounting flange ...

DN: 25 mm - 500 mm
Pressure: 6 bar - 25 bar
Temperature: 200 °C

... opening of the perforated basket element which may be adjusted by the stroke movement of the control device. Several mixing valves may be arranged in line for a multi-stage mixture of several gases. Applications: Industrial ...

... goods up to 8 mm in size. The motor driven flat gate can also be used as a proportional slide gate. This modular gate allows the installation of various drive configurations - manual, pneumatic, or electric ...

DN: 10 mm - 150 mm
Pressure: 160 bar - 250 bar
Temperature: 350 °C

... Y-pattern body (DN 50) – quick-acting design with electric actuator Material stainless steel 08Ch18N10T, carbon steel 12 020.1 Connection butt welding ends Operating handwheel, electric ...

... Desalination • Oil Refining Characteristics 1. AFC butterfly valve is characterized by simple structure, small volume and light weight, and it is easy to install and adjust. The valve is widely ...

DN: 50 mm - 600 mm
Pressure: 240 psi
Temperature: 70 °C

... heater's thermal swich mechanical connection flange F10, ISO5210 manual control. Gate valve design standards: Design in accordance to EN 1171, Face to face dimensions according to EN 558, basic series ...

DN: 15 mm - 800 mm
Pressure: 16 bar - 420 bar
Temperature: -100 °C - 720 °C

GUIDED SPHERE VALVE METAL SEAT WIDE RANGE The KTN SAT is the best KTN design to solve the widest range of applications. The main goal of this design is its philosophy of achieving the highest security using unmatched ...