Fieldbus I/O modules

The DAT 3011 device is specially designed to acquire RTD or Tc sensors, mV, V or mA input signals connected to the universal analog input. It is also capable acquire up to 3 digital inputs and to drive one solid-state relay and two SPST ...

The EH-RIO2 series of Remote I/O modules allows you the flexibility to distribute I/O throughout your application. Using EH-RIO2, you can precisely plan and expand your I/O and locate them right where they are needed: close to the sensors ...

The I/O system 1000 offers a precise control of input and output modules, including the import of touch probe inputs which are needed for synchronized movements in cyclic production processes. A minimum internal cycle time combined with ...

The Beckhoff I/O system encompasses a large number of signals and functions. The extensive range of products is rounded off by the system terminals with further functionalities: Power feed terminals for fieldbus and E-bus power supply; ...

Mount, connect and you're ready to go. This is the new dimension for remote I/O mounted directly on the machine. Its credit card size design allows for mounting in the smallest areas. No space whatsoever is required in the control cabinet. ...

Further sensors and system components are needed in order to set up the KNX system and operate it optimally. Presence and motion detectors enable occupancy-related and needs-based control, while a room thermostat and the corresponding ...

Application range (zones): 1, 2 Ex interface zone: 0, 1, 2, 20, 21, 22 Max. voltage Uo: 24.40 V AT_ST00589: no Highlights - Eight channels can be used individually as inputs or outputs Intrinsically safe Ex ia IIC inputs/outputs ...

The MELSEC ST series is an universal solution for distributed automation systems. Its modular architecture makes MELSEC ST exceptionally flexible, so that it can be configured precisely for any application. MELSEC ST is Mitsubishi's ...

With the ESX.mbc, we present a new CAN-J1939 module especially for the agricultural and construction machine sector, to control electric motors and actuators in a performance range of up to 200 W. It provides four fast PWM half bridges ...

Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low ...

MCM260Xs are data acquisition modules. The complete series includes six different combinations of free-programmable analog and digital I/Os. Originally conceived as data acquisition/actuation modules for Pixsys PLCs (programmable logic ...

The Ixxat Safe T100/PS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category ...

Cost and space saving Mixed modules are cost and space-saving modules that combine special I/O characteristics for different fields of application. Thus, optimized solutions for individual customer or industry requirements can be offered.

Designed using the Maxim MAX197 successive approximation-type A/D chip, the SeaI/O-470E provides eight differential or 16 single-ended 12-bit inputs and two 12-bit D/A output channels. The A/D inputs are software selectable for 0-5V, ...

The ANTARES 8AIH Remote I/O Module is suitable for the direct linking of 8 intrinsically safe two-conductor transmitters. NAMUR sensors, optocouplers, wired and unwired mechanical contacts or other actuating elements can be connected ...

-Designed specifically for Remote I/O Systems -System sizes from 2 to 15 I/O modules per CPU -Easy configuration using free software utility. -Automatic I/O module identification and scanning -No programming required but can be used ...

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling ...

Belden adds a new I/O module to Lumberg Automation™ LioN-Link decentralized I/O fieldbus system for safety applications The new Lumberg Automation™ I/O module (0942 UEM 612), which meets the requirements of protection class IP67, allows ...

EtherCAT/ PROFIsafe slave module for safe speed and position of 1 axis for further evaluation in a master module 14 safe digital inputs Up to 4 safe digital outputs 3 Encoder interfaces 2 Relay / Pulse outputs ...

I/O acquisition modules with 4 inputs / outputs: NXT-A4 Remote I/O acquisition modules compatible with ModBus RTU (RS485) and ModBus TCP (Ethernet) protocols. Versatile IO analog module equipped with ModBus and CANBus NXT-A4 ...

The MPNC020 module has digital inputs/outputs and it can be used as extension of PLC (TPAC) / operator panels (TP) and any other panel that has a Modbus RTU or CANopen communication protocol. Depending on the communication interface ...

Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...

CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports 8 digital 24V/500mA output and 8 analog input channels. The inputs are splitted in 0-10V ...