Flange check valves

DN: 2 in - 20 in
Pressure: 200 psi

The Apollo InternationalTM Model 910F-LFA Flanged Cast Swing Check Valve provides full flow capabilities. It provides reliable and economical protection against reverse flow. The Model ...

DN: 2 in - 10 in

2 to 10 in. (50 to 250mm) Description: Series 411 Swing Check Valves are UL Listed and FM approved in sizes 2-1/2 to 10 in. (65 to 250mm). Valves feature a full port, flanged ...

DN: 20 mm
Pressure: 0 bar - 210 bar

Series VC5V06 Nominal Size Inch 3/4" mm 20 Maximum Flow gpm 26 lpm 100 Maximum Pressure psi 3050 bar 210 Mounting Flange (Poppet & Ball Type)

DN: 150, 200 mm
Pressure: 16 bar
Temperature: -60 °C - 180 °C

... Specifications •Design - ISO/DIN •Nominal Pressure - 16 bar •Lining - PTFE •Housing Material - EN-JS 1049 •Flanges to ISO 7005-2, type B or flanges drilled to ASME B16.5 class 150, raised face ...

DN: 40 mm - 900 mm
Pressure: 0.7 bar
Temperature: 0 °C - 85 °C

The Model 740Q Booster Pump Control Valve is a double chambered, hydraulically operated, diaphragm actuated active check valve that opens fully or shuts off in response to electric signals. ...

DN: 50 mm - 400 mm
Pressure: 16, 10 bar
Temperature: 0 °C - 100 °C

housing, water distributions, protection of drinking water networks A double check valve composed of 2 standard range single non return valve type 402 coupled together.

DN: 110 mm - 160 mm
Pressure: 1.6 MPa
Temperature: 40 °C - 150 °C

ZNF Series Check Valves is a kind of check valve, which plays a one-way role in the pipeline to prevent reverse flow of medium. It is widely used in pipeline equipment ...

DN: 4 mm - 14 mm
Pressure: 0 bar - 350 bar
Temperature: -30 °C - 80 °C

Counterbalance valves with single effect, compact configuration, excellent flow regulation and excellent working stability. Flow rate: from 1 to 60 l/min. Max working pressure 350 bar.

DN: 50 mm - 300 mm
Pressure: 50 bar
Temperature: -29 °C - 425 °C

Body material Steel A216WCB Stem material Stainless steel A182 F6 Connection Flanged RF ANSI 150 / ISO PN20 Seat Stellited steel A105 Working pressure 150 Lbs

DN: 50 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 120 °C

Sferaco flange check valve 366 series is suitable for all positions due to the stainless steel spring. The body has an arrow, which indicates respect the flow direction. RF flanges ...

DN: 2, 3, 4 in
Pressure: 16 bar
Temperature: 0 °C - 200 °C

Check valve is a device in a pipeline that allows fluids or gases to flow in only one direction. When the pressure of the fluid or gas in the pipeline exceeds a certain value, the valve ...

DN: 65 mm - 200 mm
Pressure: 10 bar
Temperature: 0 °C - 60 °C

EFFAST CK wafer check valve is a non-return valve ideal for limited space installations. Thanks to the design of its disc, EFFAST CK valve can offer a greater opening ...

Round swing check gate to be wall-mounted or flanged, intended to prevent backflow and commonly installed at the end of a line, as a check valve. Carbon or stainless steel fabricated ...

DN: 10 mm - 100 mm
Pressure: 0 MPa - 1 MPa
Temperature: -10 °C - 150 °C

... quick check valves Standard: DIN, SMS, ISO, 3A Sanitary quick check valve material: the material contacting member and AISI304 or AISI316L using Industrial dairy products, ...

DN: 50 mm - 600 mm
Pressure: 10, 16 bar
Temperature: -10 °C - 150 °C

... -10*C to 120*C for EPDM seat. Température from -10*C to 82*C for NBR seat. Température from -10^ to 150*C for Viton seat. Flange Type EN 1092-2 PN10/PN16, ANSI B16.1 Class125, BS10 Table D/E.

DN: 15 mm - 300 mm
Pressure: 6 bar - 160 bar
Temperature: -60 °C - 550 °C

... •environment-friendly •no maintenance •face-to-face dimension according to EN 558 series 1 •flanges drilled according to EN 1092-1 for type F •flanges drilled according to EN 1092-2 for type A,C,E

DN: 40 mm - 150 mm
Pressure: 0.5 bar - 17 bar
Temperature: 60 °C

... beyond most other valves. This guide will asist you in the selection of the optimal DOROT Series 500 valve. Remote Control & Check Valves EL - Solenoid Controlled Valve CV ...

DN: 15 mm - 200 mm
Pressure: 10 bar - 40 bar
Temperature: -50 °C - 400 °C

design of the body is straight sealing – check valve disc with spring – with spring, the valve can be mounted in position both horizontal and vertical – sealing surface is welded by ...

DN: 50 mm - 1,500 mm
Pressure: 270 psi - 4,730 psi
Temperature: 196 °C - 593 °C

Swing check valve Product Switch valve Product description Swing check valve Model H44H/X Size 2”～60”(50mm～1500mm) Operating ...

DN: 50 mm - 400 mm
Pressure: 240 psi

... 500-7 ball float: EPDM/alluminium gasket: EPDM bolts, washers: carbon steel/stainless steel A304 working pressure PN16 flanges drilled acc. PN10/16, starting from DN200 - PN10 correspond to the standards: DIN2533, DIN3202- F6

DN: 150 mm - 4,500 mm

ANSI FLANGES CHECK VALVE Cl.150-300 Description •Standard: API 602 y ANSI B16.34 •Face to face dimension: ANSI B16.10. Flange dimension •Test: API 598. •Construction: ...

DN: 100 mm - 1,500 mm
Pressure: 10 bar - 100 bar

Non-return Valves Non-return axial valves : one-way valves allowing the fluid to flow in only one direction and preventing the backflow. Main features ■ optimization of the aerodynamic ...

DN: 50 mm - 300 mm
Pressure: 10, 16 bar
Temperature: 0 °C - 80 °C

Design Swing-check valve, body and top cover FBE-coated. Face to face EN 558-1 Row 48 Connection Flange DN50 … DN150, PN16 drilled, Flange DN200 … DN300, PN10 ...

DN: 32 mm - 600 mm

intermediate flange version for preventing backflow available in different seal and body materials areas of application: water, liquids with low fibre content flanges: DIN EN 1092-1 Type ZRK: ...