Flange valves

DN: 25 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 60 °C

Our flanged ball valves consist of a two-piece nodular cast iron body and are in fire-safe design. The floating ball inside the body, which is chambered on three sides, is adjusted with the handle. Optionally, ...

DN: 20 mm - 100 mm
Pressure: 25, 40 bar

... range of ball valves with a variety of body and seal material combinations with female thread, male thread or flanged connections. The ball valve dimensions conform to the DIN standard ...

DN: 15 mm - 150 mm
Pressure: 40, 16 bar
Temperature: -29 °C - 175 °C

WAFER ATEX BALL VALVE WITH ISO MOUNTING PAD - FULL BORE - LOCKABLE HANDLE - STAINLESS STEEL 316

DN: 15 mm - 100 mm
Pressure: 16, 40 bar
Temperature: -29 °C - 175 °C

3 PIECES FULL BORE FLANGED END BALL VALVE - STAINLESS STEEL 316

DN: 15 mm - 200 mm
Pressure: 40, 16, 10 bar
Temperature: -29 °C - 200 °C

2 PIECES FULL BORE FLANGED END BALL VALVE - STAINLESS STEEL 316

DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with ...

Weir-type diaphragm valve to DIN/EN with flanged ends or threaded socket ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, ...

DN: 15 mm - 200 mm
Pressure: 0 bar - 16 bar
Temperature: -20 °C - 160 °C

Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with ...

Pressure: 10 bar
Temperature: -30 °C - 130 °C

Tork's T-KV L1130 Serie is a single side flange type butterfly valve which is recommended for applications that include ship building, hot and cold water, HVAC application, textile units, base and salty ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 220 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. Applications - Air for aeration in wastewater treatment plant - ...

DN: 25 mm - 400 mm
Pressure: 0 bar - 10 bar
Temperature: 180 °C

Energy saving valve for the precise and economical control at low loss of pressure of liquids and gases that can be either clean or contain particles. For : Air for aeration in wastewater treatment plant Gases Municipal ...

DN: 40, 300 mm
Pressure: 10 bar
Temperature: -10 °C - 150 °C

... 250) PN 10 gate valve flat body inside screw stainless steel (AISI 304) trim 150°C (max) Main characteristics • Manufactured in Italy in accordance with EN 1171 • Face-to-face length according to EN 558-1, basic ...

DN: 40 mm - 300 mm
Pressure: 16 bar
Temperature: -10 °C - 150 °C

Cast iron (GJL 250) PN 16 gate valve oval body OS&Y stainless steel (AISI 304) trim 150°C (max). Made in Italy. Fields of application: Industrial plants - Sewage Water - Water treatment - Air-conditioning systems (HVAC) ...

DN: 40 mm - 300 mm
Pressure: 10 bar
Temperature: 150 °C

Cast iron (GJL 250) PN 10 gate valve flat body OS&y; stainless steel (AISI 304) trim 150°C (max)

Pressure: 1.8 MPa
Flow rate: 50 l/min - 60 l/min

Technical Specification • Pressure Difference : 0.3Bar

Pressure: 1.8 MPa
Flow rate: 50 l/min - 60 l/min

Technical Specification • Pressure Difference : 0.3Bar

DN: 15, 20 mm
Pressure: 10.2 bar - 40 bar
Temperature: 50, 150, 250, 300 °C

The CDV32 condensate drain valve automatically discharges air and condensate from steam systems during start-up. A compression spring keeps the valve open when the system is not pressurized. As soon as ...

DN: 15 mm - 150 mm
Pressure: 0.2 bar - 25 bar
Temperature: 250 °C

... series pressure reducing valves are single seated, bellows sealed controllers that operate without auxiliary energy. Designed for use with steam, compressed air, and other gases compatible with the construction. These ...

DN: 50 mm - 100 mm
Pressure: 0.2 bar - 18 bar
Temperature: 130 °C

The ADCA RPW45B series pressure reducing valves are single seated, diaphragm sensing proportional controllers that operate without auxiliary energy. Designed for use with water, compressed air and other liquids and gases ...

DN: 2 in - 24 in
Pressure: 16 bar - 250 bar

... entry ball valves are used in piping systems where the top of the valve can be removed to gain access to the ball and seats without removing the entire valve from the piping system. Typically ...

DN: 0.5 in - 10 in
Temperature: -29 °C - 120 °C

... variety of this series of ball valves manufactured to API, ASME, DIN And JIS standards. - Usually furnished with flanged end connection. - Due to the low-pressure ratings and small sizes, the torque ...

DN: 1.5 in - 80 in
Pressure: 2.2 MPa
Temperature: -29 °C - 425 °C

... ATHENA manufactures a wide range of eccentric butterfly valves, including double eccentric butterfly valves and triple offset butterfly valves, as well as other high performance butterfly ...

DN: 0.5 in - 6 in
Pressure: 1 bar - 13 bar
Temperature: -15 °C - 180 °C

Model RET-DS / REF-DS are the Direct Acting Pressure Reducing Valve designed with Duplex Stainless Steel material providng more options for different industries. Pressure Reducing Valve protecting the ...

DN: 1.5 mm - 56 mm
Pressure: 0 psi - 142.2 psi
Temperature: -15 °C - 80 °C

... / BFF, The float valve has one major function and that is to stop the flow of water from an inlet supply line. The float valve rises as the water level rises. Once a specified water level is reached, ...

DN: 1.5 in - 56 in
Pressure: 0.3 psi - 8 psi
Temperature: -15 °C - 80 °C

... Presssure Sustaining Valve, also known as Back Pressure Valve, or Back Pressure Sustaining Valve, is a valve that maintain required pressure of inlet port by opening ...

ILN oil-air interlock injection valve High-performance grease injection valve, suitable for injection lubrication of medium and large gear surfaces.

Pressure: 13 bar - 50 bar
Temperature: -29 °C - 204 °C

Pressure: 3 bar - 35 bar

DN: 50 mm - 600 mm

• DIN or ANSI flange connections • Robust, stainless steel shaft 304 • Manufactured in PVC-U body. PP / PP-GF • Gaskets in EPDM or FPM • Possibility of electric motor or pneumatic actuator DA, NA, NC • Manual lever ...

DN: 15 mm - 100 mm
Temperature: 0 °C - 120 °C

... PP or PVDF • Dimensions up to DN250 with handwheel • Gluing, soldering connections, with fixed DIN or ANSI flanges Advantage • Valve 2/2 way external regulation • Compact construction with high ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

PRESSURE SUSTAINING VALVE The valve maintains downstream pressure over a pre-set minimum value, regardless of fluctuating flow or varying upstream pressure. Otherwise the valve may ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

ALTITUDE CONTROL VALVE This valve controls water level in high level reservoirs to avoid overflow, without any external control system like float control etc. The valve remains completely ...

DN: 50 mm - 600 mm
Pressure: 25 bar
Flow rate: 16 m³/h - 5,400 m³/h

EXCESSIVE FLOW VALVE The valve avoids reservoir emptying and flooding dues to casual pipeline failure. The valve is controlled by a differential hydraulic pilot that senses flow speed ...

DN: 100 mm - 400 mm
Temperature: -25 °C - 150 °C

Butterfly valves suitable for intercepting powdered products - Size DN100 - 150 - 200 - 250 - 300 - 350 - 400 - 2 half-bodies in cast aluminum with double flange: identical upper and lower flange - ...

DN: 150 mm - 800 mm

Slide gate valves suitable for intercepting products in powder, granules, fibers and heavier materials - Size 150 - 200 - 250 - 300 - 350 - 400 - 500 - 600 - 700 - 800 mm - One-piece valve body in ...

DN: 0.5 in - 2 in
Pressure: 3.5 bar - 7 bar
Temperature: -10 °C - 180 °C

Port Refer below technical data sheet (Available BSP / NPT) End Connection - Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / VITON / EPDM / SILICON Media Steam, Air, Water, ...

DN: 0.5 in - 2.5 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

Angle Seat Valve with Plastic Operator (NC/NO/Double Acting) > Port: - Refer below technical data sheet (Available BSP / NPT) > End Connection: - Screwed / Flange / Tri-Clamp > Body Material: - SS ...

DN: 0.5 in - 2 in
Pressure: 3.5 bar - 8 bar
Temperature: -10 °C - 180 °C

Port - Refer below technical data sheet (Available BSP / NPT) End Connection - Screwed / Flange / Tri-Clamp Body Material - SS ASTM A351 Grade CF8 / CF8M Seal - TEFLON / PEEK / VITON / EPDM Shaft - SS304 / SS316 Cover ...

DN: 40 mm - 1,600 mm
Pressure: 2.5 bar - 100 bar
Temperature: -10 °C - 200 °C

... the construction according to API 600 and ASME B16.34 , API 598 Test second , size flanges according to ASME B16.5 , EN 1092-1 and ISO 7005 and spacings between flanges according to DIN 3202 , EN 558-1 ...

DN: 100 mm - 3,000 mm
Pressure: 16, 10, 25 bar
Temperature: -40 °C - 200 °C

... be used as a safety valve (positive safety valve able to close even in case of tampering) In addition to the above mentioned technical advantages there is a remarkable economical benefit as this valve ...

DN: 100 mm - 1,400 mm
Pressure: 2.5 bar - 64 bar

... very différent excercise pressure. The use of needle valve with the aid of actuators allows to utilize it in control systems with very différent functions. Water flow régulation actuated by needle valve ...