Flange valves

DN: 80 mm - 300 mm
Flow rate: 20 m³/h - 1,200 m³/h

This valve is operated by line pressure by means of a 3 way selector valve, this selector has the positions “open”, “close” and “auto”. In the “open” position the valve is fully opened, ...

DN: 8 mm - 200 mm
Pressure: 0 bar - 100 bar
Temperature: -50 °C - 305 °C

... Rate A (no leakage) Flange / BW / SW / Tapped Options Heating jacket Sight Glass Check valve Electrical continuity Advantages Face to face: ISO5752-S01 (Flanged) Face to face: EN 12982 ...

DN: 15 mm - 40 mm
Pressure: 17 bar - 27.5 bar
Temperature: 204 °C

... ACV Series Control Valve for applications when central steam or steam under pressure is available. The valve uses our parabolic plug design, delivering immediate response and precise modulation of ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C

Flange-Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with ...

DN: 15 mm - 200 mm
Temperature: -20 °C - 185 °C

... : - -20°C~185°C Ball valve, the opening and closing member (sphere) is driven by the valve stem and rotates around the axis of the ball valve. It can also be used for fluid regulation ...

DN: 0.25, 0.125, 0.375 in
Pressure: 0 bar - 10 bar
Temperature: -20 °C - 80 °C

Throttle check valve, Supply air throttle (V) Threaded connection M5 i., M5, For throttling flow rates and regulating the piston speed of cylinders. Small dimensions, ideal for tight spaces. To be screwed directly into ...

DN: 2 in - 12 in

Cast Steel Globe Valves Sizes: 2” - 12”Pressure: Cl. 150 - Cl. 2500Materials: Carbon and Alloy Steels,Stainless & Duplex SteelsEnds: Flanged, ButtweldOptions: Handwheel, Gear orMotor operated.Straight & Angle TypeBellow ...

DN: 50 mm - 1,000 mm

... Segment Ball Valve is a high performance valve we have developed with advanced technology.It also called eccentric ball valve ,semi ball valve ,half ball valve ...

DN: 10 mm - 200 mm
Pressure: 16 bar - 160 bar

Wafer type ball valve is a flange end 1pc ball valve with super-short one piece body design, has short distance between the valve seat and the end flange, ...

Pneumatic Ball Valve Pneumatic Flange End Ball Valve

DN: 8 mm - 150 mm
Pressure: 1,000 psi - 2,000 psi
Temperature: -196 °C - 300 °C

The ball cover can be connected with the valve stem to form a 90 degree ball core structure. It is mainly used for pipeline switch, emergency cut-off, and ball core V-shaped opening can also be designed to achieve flow ...

DN: 1.81 in - 7 in
Pressure: 2,000 psi - 20,000 psi

DEENPU valves are designed and manufactured according to API 6A Standards.Our gâte valves can be interchangeable with Cameron FC sériés gâte valves.The sealing surface of valve ...

DN: 0.5 in - 8 in
Pressure: 0 bar - 20 bar
Temperature: -50 °C - 250 °C

... Standards • Designs: ANSI B16.34 ISO17292 API6D • Face to face ANSI B16.10 • Top flange ISO 5211 • Material according NACE MR-0175 • Testing API 598, ISO 5208 ...

DN: 0 mm - 800 mm
Temperature: 60 °C

... all these areas, Dueker valves – made of enamelled ductile cast iron – are unbeatable. And other aspects also come into play and are becoming increasingly important: cost-effectiveness and 100% recyclability – the butterfly ...

DC24V Al-Alloy Material on-off electric butterfly Valve, electric actuator with Ce/CSA/RoHS Certificate Features: Name: On-off Electric Butterfly Valve Standard Time/Torque: 20S/50Nm Motor Power: ...

The Pneumatic Flange Ball Valve is a a single-acting/double-acting valve composed of cast steel, WCB, and stainless steel. The actuator cover is made of aluminum alloy, and it has nominal ...

DN: 13 mm - 48 mm
Pressure: 400, 200, 250, 315 bar

With Flange to SAE J 518 / DIN 6162 For SAE-Split Flange Halves, Category 2.54 1 = Ball Sealing - POM 2 = Stem Sealing - NBR

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: -20 °C - 180 °C

Flapcon® BA102 Series Monoblock flanged ball valves are manufactured from cast iron, cast steel and stainless steel castings. Thanks to full-bore ball construction, they provide high capacity permeability. ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 80 °C

Description 2/2-way valve Impulse without differential pressure Body Cast iron

DN: 6 in - 8 in
Pressure: 300, 750 psi
Temperature: -46 °C - 240 °C

... 5211 NACE MR0175 / ISO 15156 materials (optional) End connection standards: RF Flange – ASME B16.5 Raised Face Face to face standards: ASME B16.10 for flanged Pressure testing standards: EN ...

DN: 50 mm - 600 mm
Pressure: 10, 16, 25, 40 bar
Temperature: -30 °C - 650 °C

... higher pressure applications.   V110 Series valves can be supplied with hand levers and gear boxes as manual valves and with pneumatic, electric or hydraulic actuators. Proval V110 Series valves ...

DN: 0.25 in - 8 in
Pressure: 150 psi - 4,500 psi
Temperature: -254 °C - 1,038 °C

The HI-100® Control Valve features an in-line Straight-thru, venturi flow design. The control element, a spherical ball, is contained by a cage that positions the ball relative to the downstream seat by means of linear ...

DN: 0.75, 1, 0.5 in

Brass ball valve Lever of aluminium Brass full-bore ball valve, 1⁄4” drain valve and extra 1⁄4” connection for pressure gauge. Aluminium lever. Brass ball valve, ...

DN: 25 mm - 65 mm

... Concentrate Ball Valves come in standard sizes ranging from 1.0 to 2.5 in (DN25-DN65) to match the concentrate inlet thread (or flange) size on Winan proportioners and Inline Balanced Pressure Proportioner(ILBP) ...