Flow control valves

DN: 0.25 in - 1 in
Pressure: 413 bar
Temperature: -200 °C - 500 °C

Needle valve with conical stem/shutter for precision and stable close, for use in general applications. Ideal for flow regulation by strangulation liquid and gases systems sealing and venting . Thanks ...

DN: 20 mm - 354 mm

A butterfly valve is a valve which can be used for isolating or regulating flow. The closing mechanism takes the form of a disk. Operation is similar to that of a ball valve, ...

... chemistries, our PTFE Chemical Injection Control Valve will self-regulate and control the dosing flow rate to gallons per hour (GPH) of injected chemistry. Our iPolymer ...

DN: 15 mm - 100 mm
Pressure: 150, 250 psi
Temperature: 70 °F

... ball valves which has O-rings that are constructed with FPM or EPDM while its seats are made from PTFE. It is available in PVC and Corzan CPVC versions. Its socket has a maximum size of 2 inches with threaded end ...

DN: 80 mm - 400 mm

... Rotovalve Light valve model is specially designed for food applications. The body and the rotor are made up of stainless steel EN 1.4404 material. It promotes uniform discharge of the product, because of its rotary alternating ...

DN: 1 in - 24 in

... Balancing Valves are designed specifically for heating/air conditioning systems in multi-story commercial buildings. Balancing Valves provide a means of adjusting and reading the flow ...

DN: 0.5 in
Pressure: 250 bar
Temperature: -20 °C - 80 °C

This type of valves allows the fast and exact regulation of the flow in a sense. Roquet commercializes regulators of 2 and 3 ways with connections with threaded fittings or plate.

... production processes. Only minimal tolerances are allowed, which, for media with difficult properties with regard to grain size, flow behavior, consistency, and bulk weight, requires precision work where design and process ...

Pressure: 350 bar
Temperature: -54 °C - 204 °C
Flow rate: 70 l/min

Dual Pressure compensated Flow Control Valves can provide pressure compensation and flow control in two lines, with the flow being controlled ...

... critical. Compared to standard valves, these valves provide a minimal dead space between screw and valve, which result in a higher mixing accuracy and optimal possibilities for cleaning. The ...

DN: 0.5 in - 6 in
Pressure: 10 bar - 160 bar
Temperature: -46 °C - 400 °C

Metal seated Wafer Ball Valve construction with floating ball for high temperature services. There are three valve models: ● For low pressure services (AP10) ● For high pressure services (AP10HP) ● ...

... and secondary vessels in mixing plants, wagons, reservoirs under filters and separators, cone worm mixers By means of the lever system, the flap is vertically moved down and swivelled laterally by the side of the discharge ...

Pressure: 20, 60 bar

The flowcontrol needle valve used at the gas inlet of the machine or the wire feeder gives full flow adjustment and is available at the work place regardless of distance to the gas cylinder/gas outlet.

DN: 0.25, 0.375, 0.5 in
Pressure: 0 bar - 300 bar
Flow rate: 12, 20, 25 l/min

... series engineered by Dicsa, is a flow-control valve, composed of a steel made body and interior. Its exterior surface features a zinc plated construction. Furthermore, this Dicsa flow ...

DN: 0.5 in - 2 in
Temperature: -20 °C - 130 °C

Balancing valve, in dezincification resistant brass with threaded connections, for the flow rate regulation in heating systems.

DN: 0.25 in - 1.25 in
Temperature: -10 °C - 100 °C

Excluded from 97/23/EC directive (article 3 § 3) -POM/PTFE ball seats; NBR other seats - Reduced bore- The shown images can differ from the actual product. Technical data & prices are subjected to be changed without prior notice.

DN: 40 mm - 300 mm
Pressure: 25, 16, 10 bar
Temperature: 40 °C

... operation The flow–control valve completely hydraulically ensures a pre–determined maximum flow, irrespective of any changes in the operating pressure. The nominal ...

DN: 15 mm - 250 mm
Pressure: 40 bar
Temperature: -10 °C - 200 °C

... stainless steel balancing ball valve Additional information Material - Stainless Steel Typology - Static balancing Connection - Welding ends, Flanged Variable orifice stainless steel balancing ball valve Welding ...

DN: 15 mm - 300 mm
Temperature: -40 °C - 95 °C

... The Diaphragm valve is designed so that pressure is distributed evenly. This design allows the hand-wheel torque to be reduced and maintains shut-off at low torque. The strict control of the processing ...

DN: 0.125, 0.375, 0.5 in
Pressure: -1 bar - 20 bar
Temperature: -20 °C - 84 °C

... differential pressure, the High Resolution Valve provides superior performance over legacy needle valves. The high resolution electronic flow control valve The ...

DN: 1 in - 36 in
Pressure: 16 bar - 250 bar
Temperature: 0 °C - 1,200 °C

The SwitchPlug valve consists of a triple or four-way valve along with an insert underneath and dual or triple outlets in T or Y versions. These valves are mostly preferred for usage ...

DN: 2 in

This valve has been designed for an efficient discharge of large air volumes from small water network systems, filters, containers and other devices where trapped air may impair the systems operation. The valve ...

DN: 15 mm - 50 mm
Pressure: 0 bar - 13 bar
Temperature: -10 °C - 180 °C

... G1 1/4″ – G1 1/2″ – G2″ SEAL PTFE PIPE SIZE ACTUATOR G1/8″ Options 3/2 Command Pilot Visual Positioning Indicator (Standard) Electrical positioning indicator Propotional Flow Version Applications Food ...

DN: 50 mm
Pressure: 16, 40 bar
Temperature: -40 °C - 180 °C

... jeopardizing on performance compared to a conventional control loop. Traditional installations for control tasks in process plants usually consist of several sensors, a control valve ...

DN: 0.75 in
Pressure: 0 bar - 10 bar
Temperature: -10 °C - 145 °C

proportional motorised valve 3/4" inch made of stainless steel to control the flow in the system up to 6000 l/h with an setpoint of 0 - 10 volt FKM/FPM seal: - FKM/FPM setpoint: ...