Flow rate: 0 l/min - 13 l/min
Pressure: 0 psi - 125 psi
Directional Flow Controls apply orifice technology in one flow direction and free flow in the other. They work on the principal of Flow Restriction with ...
Flow rate: 0 l/min - 13 l/min
Pressure: 0 psi - 125 psi
Nominal diameter: 0.06, 0.13 in
... to reduce system complexity. They work on the principle of Flow Restriction with the orifice diameter being identified in the part number. In addition to orifice diameter, Air Logic controls many smaller ...
Flow rate: 0 l/min - 13 l/min
Pressure: 0 psi - 0 psi
Pressure: 1 bar
Nominal diameter: 6, 8 mm
... port to control flow rate. John Guest banjo flow control (manual adjustment) push-fit fitting is installed directly onto cylinder ports to give precise control ...
JOHN GUEST
Flow rate: 0 l/min - 1,000 l/min
Pressure: 1 psi - 145 psi
Nominal diameter: 0.1 in - 0.8 in
... steps. DPC mass flow controller Aalborg Instruments’ DPC series precision digital mass flow controllers provide accurate and stable control of mass ...
Aalborg Instruments
Flow rate: 0 l/min - 1,000 l/min
Pressure: 5 psi - 1,000 psi
Nominal diameter: 0.1 in - 0.8 in
... gases are divided into two laminar flow paths, one through the primary flow conduit, and the other through a capillary sensor tube. Both flow conduits are designed to ensure laminar flows ...
Aalborg Instruments
Flow rate: 0 l/min - 100 l/min
Pressure: 1,015.3 psi
... limits for high and low gas flow oconversion factors for up to 256 gases oauto tune function for optimum control response oself diagnostic tests DFC digital mass flow controller Microprocessor ...
Aalborg Instruments
Flow rate: 10, 15, 20 m³/h
Pressure: 0 mbar - 500 mbar
Nominal diameter: 1 mm
Application: Natural gas, LPG, Methane,propane, butane, city gas, air, non -aggressive gases Size: 1/2"…1" Pressure: 0-500mbar Output Pressure Adjustment Range: 10-300mbar Body: Aluminum Temperature: -10°C…50°C
Flow rate: 20, 25, 35, 85, 135 m³/h
Pressure: 0 mbar - 1,000 mbar
Nominal diameter: 1 in - 2 in
Application : Natural gas, LPG, Methane,propane, butane, city gas, air, non -aggressive gases Size : 1/2"…2" Pressure : - 0-1000mbar Output Pressure Adjustment Range : - 10-500mbar - - - - - - Body - : Aluminum Temperature ...
Flow rate: 20, 25, 35, 85, 135 m³/h
Pressure: 0 mbar - 1,000 mbar
Nominal diameter: 1 in - 2 in
Application : Natural gas, LPG, Methane,propane, butane, city gas, air, non -aggressive gases Size : 1/2"…2" Pressure : - 0-1000mbar Output Pressure Adjustment Range : - 10-500mbar - - - - - - Body - : Aluminum Temperature ...
Pressure: 2 bar - 10 bar
Nominal diameter: 0.5, 0.3, 0.4, 0.1 in
Series of in-line flow restrictors in anodized aluminium, in stainless steel and in acetal resin. Available with one direction (unidirectional) or 2 directions (bi-directional) control of the compressed ...
Flow rate: 152 l/min - 1,702 l/min
Pressure: 1 bar - 10 bar
Nominal diameter: 3.5, 11, 7 mm
The flow regulators series 900 are available with one way or two ways air flow regulation. The range is composed by regulators with 1/8”, 1/4" and 1/2” connection. ...
Flow rate: 0 l/min - 620 l/min
Pressure: 1 bar - 10 bar
Nominal diameter: 4 mm - 10 mm
RG series regulators can be assembled directly on pneumatic cylinders and valves connections. The one way regulation can be done manually by knurled knob or screwing the heas of the regulator. Connections ...
Flow rate: 0 l/min - 1,100 l/min
Pressure: 10 bar
Nominal diameter: 6 mm - 10 mm
Brand-new version of the EV10, Cmatic Bidirectional Flow Control with dual anolog/digital interface. The command interface can be Analog 0-10 Vdc or Digital according to the MODBUS RS485 protocol.
Autonomous control unit VAV/CAV Control/feedback 0…10V and 4…20mA Ambient temperature -40…+70 °C Optional fail-safe position IP66, very high corrosion resistance, weatherproof Configurable alarm contact Optional ...
Flow rate: 45 l/min - 1,050 l/min
Pressure: 0 bar - 10 bar
Nominal diameter: 4 mm - 12 mm
... , plastics Membrane, plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
ITV
Flow rate: 45 l/min - 1,050 l/min
Pressure: 0 bar - 10 bar
Nominal diameter: 4 mm - 12 mm
... , plastics Membrane, plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
ITV
Flow rate: 45 l/min - 1,050 l/min
Pressure: 10 bar
Nominal diameter: 4, 5, 6, 8, 10 mm
... , plastics Membrane, plastics Flow regulators with banjo bodies, straight unidirectional connection, non-return valves, slide valve, quick exhaust valve Flow regulators ...
ITV
Flow rate: 5 l/min
Pressure: 145 psi
• (Rc thread , Mpa Gauge) Next-generation regulator. Direct drive, pressure regulation system, internal pilot type. Improved flow rate characteristics allow a smaller configuration (close side-by-side ...
Koganei Corporation
![FCTechnik - Gas Control Systems - flox[on] MFC](https://img.directindustry.com/images_di/logo-pp/L118821.gif){kind=logo}
Flow rate: 1 l/min - 250 l/min
Pressure: 16 bar
... new flox[on] B that represents a new generation of mass flow controller developed by FC Technik. It is based on the proved and well tested technique of thermal mass flow controller ...
FCTechnik - Gas Control Systems - flox[on] MFC
Flow rate: 1 l/min - 1,200 l/min
Pressure: 16, 70 bar
... new flox[on] S that represents a new generation of mass flow controller developed by FC Technik. It is based on the proved and well tested technique of thermal mass flow controller ...
FCTechnik - Gas Control Systems - flox[on] MFC
Flow rate: 30 l/min - 5,000 l/min
Pressure: 16 bar
... measurement of the flox[on] J mass flow controller for hugh gas flow is temperature and pressure compensated with a very high control accuracy in the lower and upper ...
FCTechnik - Gas Control Systems - flox[on] MFC
Flow rate: 0 l/min - 10 l/min
Pressure: 0 bar - 12 bar
... stability closed loop flow regulator. It can replace mass flow controllers or manifolds including proportional valve, flow sensor and control ...
Flow rate: 0 l/min - 2 l/min
The Sentry AutoVREL Flow Controller allows users to automate new or existing sample panels through a well-appointed device that controls sample panel flow based on feedback ...
Pressure: 0 bar - 10 bar
Nominal diameter: 4, 6, 8, 10, 12 mm
Flow rate: 40, 60 l/min
Pressure: 400, 350 Pa
We are pleased to inform you that the range of Solenoid control diverter flow has been enriched with the new 12V versions and the 315 bar max pressure one.
... selectivity to separate the analytes based on two different chemical properties (e.g. volatility and polarity). The INSIGHT GCxGC flow modulator for multidimentional GC from SepSolve Analytical overcomes the practical ...
Flow rate: 7 l/min
... low-boiling-point compounds by liquid N2 cooling in GC oven. Nitrogen gas flows through a heat exchange coil immersed in liquid nitrogen to liquefy it, and then the liquified nitrogen is sprayed as a jet flow ...
FRONTIER LAB
... array of valve applications throughout the world. The HCFD series High Capacity Flow Devices have been designed to provide a solution to increasing the volumetric media flow (mainly air or water) into ...
Flow rate: 30 l/h - 1,200 l/h
Pressure: 12 bar
Nominal diameter: 1 in
... easy programming and flow monitoring. Output capabilities include TTL pulse output as well as PNP or NPN alarm output that activates when either of the programmable alarm limits is reached. PSF21x can be used as a flow ...
... EN 88 class A - group 2 specifications, can be used for all the types of natural gas LPG or not corrosive gases . These regulators are widely used in supply lines for mixed and combinated burners and in the piped distribution ...
... easier tuning of the control loop. The main and process flows are used to determine the net volume flow. The operator can view the ratio of totals as well as the ratio of flowrates. The ...
Pressure: 27.6 bar
Nominal diameter: 0.5, 0.75 in
... Automatic Flow Regulator provides for external adjustment of the flow rate. Parker’s AFR-3 is a liquid flow control device for overfeed or recirculated ...
Parker Refrigerating Specialties Division
Pressure: 250, 50 psi
... VCD 1000 flow controller is precision-engineered to control low gas flows at constant mass flow rates regardless of changes in downstream pressure. The ...
Parker Precision fluidics Division
Flow rate: 0 l/min - 30 l/min
The proven technology from WITTMANN, refined and in a new setting. Standard equipment in every injection molding machine for more than 40 years. Often copied, never equaled. With over 500,000 appliances sold the uncontested number 1!
WITTMANN
... changes can be made without removing the mass flow controller from the gas panel or piping. This reduces the number of spare mass flow controllers required; saving both ...
HORIBA STEC
Please specify:
Help us improve:
remaining