Friction clutches

Torque: 44.1 Nm - 2,120 Nm
Rotational speed: 1,300, 1,500, 1,800 rpm

The FKE is best suited for applications with light starting and stopping loads. It is also commonly used as a slip clutch or tension brake within light horsepower and torque applications.

Torque: 7.5 Nm - 3,000 Nm

... with the help of the spring mounted on the armature. Clutch and release speeds in this system can be increased up to 10 times per second by means of special electronic circuits. Since there are friction ...

... REACH adopts the working principle of dry friction electromagnetic clutch, which has the advantages of fast response speed, long service life and easy installation and maintenance. Our Electromagnetic ...

Torque: 11,100 Nm
Power: 91,000, 59,000 W

The Friction clutch is indispensable in certain agricultural implement applications. The friction clutch is the only torque limiter that has the ability ...

Torque: 220 Nm - 4,500 Nm

... harbor. The KAZ clutch works in an opened state as a combined supporting and axial bearing. The propeller thrust is conducted into the stationary thrust bearing of the motor. In the closed state, the KAZ rotates without ...

Torque: 60 Nm - 2,700 Nm
Rotational speed: 1,000 rpm - 3,000 rpm
Power: 33 W - 144 W

... low maintenance due to slip-ring-free power supply and lifetime-lubricated bearings negligible wear due to special friction lining suitable for applications in harsh environments reduced shift speeds ...

Cast iron pressure plate, small weight, heat capacity big, good heat dissipation; Cast clutch cover, strong, and not easy to change. Imported diaphragm spring, support more pressing force in same size, and stable after ...

Torque: 76 Nm - 3,450 Nm

... shaft and radially outwards through the clutch hub into the cylinder. Positive disengagement is achieved by the use of release springs between the inner plates. Standard drive rings available as optional extras. Clutch ...

Torque: 5,500 Nm - 180,000 Nm
Rotational speed: 130 rpm - 6,000 rpm

... sprag RSCI high speed backstop equipped with integral torque limiter. The latter limits the backstop transmissible torque to a value that is factory set-up according to customer request. This design ...

Torque: 22 Nm

Clutches by energizing The power-on clutch creates a magnetic field that attracts the moving armature thus coupling the two shafts. Thus, the uncoupling is done by lack of current.

Torque: 17 Nm - 225,000 Nm
Rotational speed: 380 rpm - 6,200 rpm

Type AA is a roller type freewheel non-bearing supported. Bearings are required to support axial and radial loads. Lubrication and sealing must also be provided by the installation. Standard lubrication is oil. A typical ...

Torque: 2 Nm - 350 Nm
Rotational speed: 40 rpm - 3,000 rpm
Power: 40 W - 3,300 W

Magnetic Particle Brakes - Through Bore The most popular range of MEROBEL’s Electro Magnetic Particle Brakes, offering tailored solutions for every needs from its 10 sizes and up to 5 different version (acceptable power dissipation level) ...

... as well as captivating and decaptivating systems. Hello Trade offers completely customized appropriate electromagnetic clutch, or holding solenoid to meet the job at hand. They excel in offering consumer-related electromagnetic ...

Torque: 1.7 Nm
Rotational speed: 100 rpm - 800 rpm

The Model EC15 transfers up to 1.7 N-m (15 lb-in) of total load with consistently repeatable performance for one million actuations. Reell's clutches are designed for easy mechanical and electrical assembly and for low power consumption. ...

... efficiency multi-plate clutch for connect / disconnect or multi-speed in HEV and BEV powertrains Drag losses reduced by up to 95% with full powershift capability and controllability By combining a classic multi-plate ...

... applications such as indexing clutches, back-stopping clutches and overrunning clutches. In these cases, the drawn cup roller clutch performs an overrunning or locking function.

Torque: 1.7 Nm - 121 Nm
Rotational speed: 3,700 rpm - 20,000 rpm

SBF─ Drawn cup needle roller clutch has the smallest radial cross-section height in the clutch. Commonly used to transmit high torque, can be used as converter, check device and overrunning clutch.

Torque: 0 Nm - 120 Nm

Clutch Mechanism for Seat Adjustment Roller clutch bearing Energy absorbing blocking assembly Main component for customer seat height adjuster Customer enhancement by means of operating and convenience ...

Torque: 146.7 Nm
Rotational speed: 800 rpm

... coupled with the motor shaft and has to start quickly at a high rpm. In these situations, it is recommendable the usage of a clutch that engages the fan gradually, in order to prevent the risk of breakage. Typical applications ...