Fuel flow meters

Volumetric flow rate: 10 l/min - 100 l/min
Process pressure: 6 bar

FLUX Flow meters, nutating disc type FMC 100, are designed for the use with FLUX drum pumps or for the stationary application e.g. in piping systems. With the evaluation unit FLUXTRONIC® filling and dosing ...

Volumetric flow rate: 0 l/min - 1.7 l/min
Process pressure: 100 bar

The flow meter FMO 101 built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost ...

Volumetric flow rate: 0.3 l/min - 8.3 l/min
Process pressure: 100 bar

The flow meter FMO 102 built according to the oval rotor design is suitable for measuring pure, thin to highly viscous media. With the evaluation unit FLUXTRONIC® filling and dosing processes of almost ...

Volumetric flow rate: 3 l/min - 80 l/min
Process temperature: 80 °C
Process pressure: 4 bar

Oval gear flow meter - MDO 2 The flow meter with display convinces with its simple, demand-oriented display, operability and compact design. Thanks to the rotating Oval ...

Volumetric flow rate: 246 l/min
Process temperature: 80 °C
Process pressure: 16 bar

Flow meter - HDO 400 Alu/PPS | 0231-233 The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual ...

Process temperature: -40 °C - 150 °C

The TransPort PT900 portable ultrasonic liquid flow meter is Panametrics’ newest portable clamp-on flow meter. It easily attaches to the piping fixture to measure flow ...

Process temperature: -40 °C - 150 °C
Precision: 1 %
Repeatibility: 0.25 %

Whether you need flow measurement when you didn’t have it before, or you need to prove that your existing system is performing properly, the PTFM 6.1 Portable Transit Time Flow Meter ...

Volumetric flow rate: 5.13 m³/h - 951.57 m³/h
Process temperature: -18 °C - 121 °C
Process pressure: 16.5, 41 bar

The ST75 Series thermal flow meters are a compact, low cost solution for accurate, repeatable direct mass flow measurement of air and gases. These in-line (spool-piece) style flow ...

Volumetric flow rate: 800 l/h - 25,000 l/h
Process temperature: 0 °C - 200 °C
Precision: 0.5 %

New-Flow offers a large variety of products for measurement and control of temperature, pressure, flow, level, and valve. Totalizer Counter: 6 digital Zero Reset Counter: 5 digital Signal Output ...

DTJ6 flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long using term, high precision, firm structure etc. It can be the ...

Volumetric flow rate: 5 l/min - 140 l/min
Process pressure: 0.12 MPa - 0.35 MPa
Precision: 0.2 %

DTJ3 flow meter adopts advanced technology, which can be widely used on different gasoline dispensers. This product has advantages as long using term, high precision, firm structure etc. It can be the ...

Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: max 450.0 bar

VSI+ flowmeters measure the volume flow of the medium according to the gearwheel principle. A gearwheel pair fitted very precisely in the housing forms the measuring unit. The rotation of the measuring ...

Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar

Our VS gear flow meters offer unbeatable performance, linearity and resolution for most accurate measurement of clear, viscous liquids according to the gearwheel principle. A gearwheel pair adapted ...

Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar

... viscosity oil or viscous resin - RS flow meters are the ideal solution for precise flow measurement. Thanks to various bearings, tolerances, materials, coatings, electronics and resolutions, ...

Process temperature: 0 °C - 150 °C
Precision: 0.5, 1 %
Repeatibility: 0.2 %

... sewage ● Oil ship pump ● Lubricant, diesel, fuel, chemical liquids ● Industrial circulating water ● Diesel fuel, oil flow metering, etc Advantages Non-contacting ...

Process temperature: -20 °C - 110 °C
Precision: 1 %
Repeatibility: 0.2 %

... ● Industrial circulating water ● Diesel fuel, oil flow metering, etc Advantages 01 Large capacity battery: Built-in rechargeable Ni-MH rechargeable battery, provide ...

Process temperature: -30 °C - 160 °C
Process pressure: 0 bar - 40 bar
Precision: 1, 0.5 %

The Fix-mounting ultrasonic flow meter can be applied to a wide range of pipe flow measurements. Applicable liquids include pure liquids as well as liquid with small quantity of tiny ...

Volumetric flow rate: 5 l/min - 750 l/min
Process temperature: -10 °C - 120 °C

Volumetric flow meter suitable for heavy fluids, petroleum, naphtha, diesel, oil, and similar Size from small DN up to 6 " Automation interface 4.20 mA, RS 485 modbus, RS 232, Local display Also available ...

Volumetric flow rate: 2 l/h - 100 l/h
Process temperature: 150 °C
Process pressure: 15 bar - 34 bar

-For very small flow rates. -Measurement according to the oval gear principle. -For thin-bodied up to viscous liquids. -Low friction resistance. -Very precise dosing possible. -High resistance. -Wide range of viscosities ...

Volumetric flow rate: 15 l/h - 550 l/h
Process temperature: 150 °C
Process pressure: 15 bar - 34 bar

-For very small flow rates. -Measurement according to the oval gear principle. -For thin-bodied up to viscous liquids. -Low friction resistance. -Very precise dosing possible. -High resistance. -Wide range of viscosities ...

Process temperature: -40 °C - 150 °C
Process pressure: 5 bar - 200 bar

... IFR1500 flowmeter is a device dedicated to measure injected volumes or masses but also the injection rate step by step from your injector. It is perfectly suited to the control of high energy multi-shot injection systems ...

Process temperature: -20 °C - 150 °C
Process pressure: 10 bar - 200 bar
Precision: 0.1 %

... 40000 (Injection Flow and Rate) flowmeter is dedicated to instantaneous flow measurement of large and very large injection volumes and injection rate. It makes possible controlling the ...

Process pressure: 10 bar - 100 bar

The IFR 600 (Injection Flow and Rate) flowmeter is a device intended to measure injection volumes or masses but also the injection law step by step. It is used to control the high energy systems fitted ...

Volumetric flow rate: 1 l/h - 600 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar

... measurement). Diesel fuel, mineral (heating) oil and other liquids with kinematics viscosity of 1.5 cSt to 6 cSt can be measured by DFM. DFM fuel flow meter ...

Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -40 °C - 85 °C
Process pressure: 2 bar - 25 bar

... measurement). Diesel fuel, mineral (heating) oil and other liquids with kinematics viscosity of 1.5 cSt to 6 sSt can be measured by DFM. DFM fuel flow meter ...

Volumetric flow rate: 1 l/h - 500 l/h
Process temperature: -20 °C - 60 °C
Process pressure: 2 bar - 25 bar

DFМ fuel counter is used for diesel fuel consumption measurement and engine operation time monitoring of mobile and stationary machinery: - trucks, agricultural, construction, ...

Volumetric flow rate: 2 l/min - 1,200 l/min
Process temperature: -40 °C - 120 °C
Process pressure: 35 bar

... one of which is resettable. This range of flow meters has the capability to install specially designed oval wheels for high viscosity liquids (above 1000 cps). These meters find application ...

Volumetric flow rate: 100, 500 l/h
Process temperature: -40 °C - 80 °C
Process pressure: 55 bar

... T6 aluminum body and FFKM seals. Fuel and petroleum applications: 6061-T6 aluminum body and FKM seals. PRODUCT FEATURES Detection type - Continuous measurement Explosion protection - Safe zone Version ...

Volumetric flow rate: 0 l/min - 200 l/min
Process temperature: -30 °C - 80 °C
Process pressure: 25 bar

The VZO4-8 is an oscillating piston flow meter. Its operation is based on a piston which moves back and forth inside a measuring chamber, with a frequency proportional to the flow of ...

... SUTO ultrasonic clamp-on flow meter for water and other liquids S461 has all it takes to measure reliable, easy and accurate flow and consumption of water and other liquids. Based on ...

Mass flow rate: 2.2 kg/h - 243,954.9 kg/h
Volumetric flow rate: 0.5 m³/h - 14,000 m³/h
Process pressure: 1 bar - 25 bar

... rich self-checking information make easy maintenance and debugging * Independent password setup, the parameters setup, total flow reset and calibration can be set with different- level passwords, it is convenient for ...

Immersion type liquid turbine flowmeters are a quite affordable and practical solution for flow rate and quantity measurement in mostly particle-free liquid fluids. Its working principle is based on the ...