Gate valves

DN: 0.5 in - 2.5 in
Temperature: 105 °C

Overview The Roda Deaco RDS1 Swing Gate Valve is a compact air intake shutoff valve that provides emergency overspeed shutdown of a diesel engine. The RDS1 Swing Gate ...

Gate valves Gate valves are primarily used to enable or prevent a fluid medium to flow (i.e. ON / OFF control). A fully open gate valve ...

DN: 0.5 in - 2 in

Lead Free Bronze RS Gate Valve with Press Connections, 200 CWP, Sizes: 1/2" to 2"

DN: 25 mm - 150 mm
Pressure: 0 bar - 100 bar
Temperature: -20 °C - 60 °C

... off the flow of gas as the pressure increases or decreases below the affixed rate. The sleeve type valve does not need outer bypass in opening the valve. It has various Pressure Equipment Directive 97/23/EC ...

DN: 2 in - 12 in

... interchangeable brass metering ports and drain ports on both sides of the valve, two check valves with gasketed caps, bronze valve stem and plug disc, multi-turn adjustment handwheel, ...

Temperature: 425, 325, 530, 200 °C

•Z40H—150Lb Temp.：≤425℃ Supply for ：Steam, water ,oil etc non corrosion medium •Z41H 1.6C-16 Temp.：≤325℃ Supply for ：Steam, water ,oil etc non corrosion medium Z41Y •Z41Y1.61-161 Temp.：≤530℃ Supply for ：Steam, water ,oil ...

DN: 50 mm - 75 mm
Pressure: 6 bar
Temperature: 0 °C - 60 °C

• Solvent inner connection to or solvent outer connection to pipe through end connectors. • Handle indicater of flow direction. • Closing pump position is not allowed under pressure. • Excellent flow characteristics. • Visual position ...

DN: 0.75 in - 3 in
Flow rate: 0 l/min - 300 l/min

... Bronze valves with seat connections. Packing & Gasket: Asbestos-Free B&G Flo-Control Valves are used for preventing gravity flow in forced water systems and to permit summer-winter operation of ...

DN: 50 mm - 300 mm
Pressure: 1 MPa
Temperature: 450 °C

Double Plate Gate Valve refers to Australian "Armstrong" valve technology and has been successfully developed by researchers for many years. The valve is replaced by ...

DN: 50 mm - 600 mm
Pressure: 4 bar - 10 bar
Temperature: -40 °C - 130 °C

Body material Cast iron Gate material Stainless steel 304 PN (End) PN10 End Between flange Contact sealing Nitril Operating system Handwheel rising stem

DN: 50 mm - 1,000 mm
Pressure: 2 bar - 10 bar
Temperature: -10 °C - 90 °C

The Flange threaded ball valve is designed to replace the conventional multiple-valves connections. It has a lifting and twisting body with non rising hand wheel. This valve has ...

DN: 60 mm

... male thread 2.5" NST-NH. Metal-seated valves will not guarentee total waterproofness. Maximum working pressure: PN16 Valve type: gated valve Operation: by flywheel Material: aluminium ...

Viton® O-Ring Sealed Gates Stainless Steel Construction Manual & Electropneumatic Operation

DN: 8, 10, 12 in
Pressure: 10 bar
Temperature: 0 °C - 120 °C

A wedge gate valve is a type of valve that is widely used in many industries - its main purpose is to start or stop a fluid flow rather than to regulate it. The design of the wedge gate valve ...

... strengthens the valve body durable. • Stainless steel rod, swifter openning and closing by using studs. Installable Accessories Solenoid Valve Limit Switch Air-Filter Regulator Pneumatic ...

DN: 50 mm - 250 mm
Pressure: 0.4 bar - 3.1 bar
Temperature: 0 °C - 60 °C

Ideally suited for flow control using minimal piping space. Easy to open and close. Light weight. Specially indicated for swimming-pools and spas. TPV Gaskets.

DN: 100, 125, 160, 200 mm
Flow rate: 36 m³/h - 180 m³/h

FOR EXTRACT AIR Circular disc valves with manually adjustable annular gap Nominal sizes 100, 125, 160, 200 mm Volume flow rate range 10 – 50 l/s or 36 – 180 m³/h Diffuser face made of formed sheet steel, powder-coated For ...

DN: 80 mm - 250 mm

Valves are produced of steel sheet powder painted glossy white acc. to RAL 9016 or of chromium coated sheet. They are available in diameter range from 80 to 250 mm and depending on a type are delivered with or without ...

DN: 50 mm - 1,200 mm
Pressure: 6, 16, 25 bar

The EX model knife gate is a uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shutoff on suspended solids in industries ...

DN: 15 mm - 100 mm
Pressure: 16 bar
Temperature: 120 °C

Brass gate valve Novo • - Non rising stem, solid wedge, screwed ends • - Used for water, petroleum • - Green color handwheel • - BS 21 / ISO 228-1-2000 threads standard • - Max working pressure: ...

DN: 15 mm - 1,200 mm

A gate valve, also known as a sluice valve, is a valve that opens by lifting a round or rectangular gate/wedge out of the path of the fluid. The distinct ...

DN: 50 mm - 600 mm
Pressure: 16, 25 bar
Temperature: -10 °C - 120 °C

Valve Standard: Comply with BS 5150 (EN 1171) & MSS SP-70. Working Pressure and Température Size 50 to 600, working pressure PN16/Class125. Size 50 to 300, working pressure PN25/Class250. Température from -lO°C to 120°C Fiange ...

Cast Stainless Steel Gate Valve Stardard Connections:Flanged Ends ASME Class:150# ~ 1500# DIN Class:PN10 ~ PN160 Size:1/2" ~ 36" Features And Benefits API603 Design Integral Seat and Back Seat Rising ...

DN: 8 mm - 80 mm
Pressure: 0 bar - 20 bar
Temperature: 0 °C - 120 °C

Specification Used for water Thread standard: BS 21/ ISO 228-1-2000 Max. working pressure: 20 bar Max. working temperature: 120oC Origin: Vietnam Manufacturer: Minh Hoa Investment JSC. Minimum order quantity: 1,000 pieces Factory price