Globe valves

Pressure: 16 bar - 40 bar
Temperature: 300 °C - 450 °C

EBSV Bellow sealed valves have been designed in a very compact settlement and provide perfect flow control. They are manufactured in different materials suitable for various applications including steam and industrial water.

DN: 50 mm
Pressure: 16, 40 bar
Temperature: -40 °C - 180 °C

FOCUS-1 is developed for the process industry and features a integrated control valve, flowmeter, pressure and temperature sensors combined with extensive computing power in one single device. DESIGNED FOR HIGHEST ...

DN: 0.5 in - 48 in
Pressure: 600 psi - 15,000 psi

Pressure balance lubricated plug valves are metal seated valves providing a tight shut off ( 0 leakage ) sealing, valves shall be regularly lubricated along with their operation by injection ...

DN: 25 mm - 100 mm
Pressure: 10 bar
Temperature: -10 °C - 140 °C

The INNOVA N-Type valve is a pneumatic shut-off seat valve for hygienic applications. The valve is authorized to carry 3-A symbol. Note: Consult the options of the valves ...

DN: 25 mm
Pressure: 16 bar
Temperature: 0 °C - 300 °C

Flange-Globe valve DN 25 in straight through with bellow flange acc. DIN EN 1092 material grey cast iron DN-JL1040 with Isolation plug seal: - metal design: - straight through with bellow body ...

... /T, Western Union, MoneyGram Supply Ability: - 10000PCS/Mouth J41 J941russian standard cast steel globe valve and motorized globe valve price Structural ...

DN: 0.5 in - 2 in
Pressure: 16, 12.8 bar
Temperature: 120 °C - 200 °C

DN: 0.5, 0.25, 0.125, 0.375 in
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C

Stopper valve pneumatically actuated, G 1/8, Plug connector 6/4, For high-speed positioning and stop functions as well as emergency switching (e.g. emergency stop). If a control signal is present at port 3, air can ...

Vatac Globe Control Valves covering pressure control and flow control valves, and are designed and manufactured to ensure leakage of less than 100 ppm (parts per million) of volatile ...

DN: 2 in - 12 in

Cast Steel Globe Valves Sizes: 2” - 12”Pressure: Cl. 150 - Cl. 2500Materials: Carbon and Alloy Steels,Stainless & Duplex SteelsEnds: Flanged, ButtweldOptions: Handwheel, Gear orMotor operated.Straight ...

DN: 50 mm - 350 mm

... .The valve seat is installed between the two valve body ,so the valve seat can be replaced easily . 3.To ensure the valve stem has straight line motions ,there is an ...

DN: 15 mm - 65 mm
Pressure: 6 bar - 8 bar
Temperature: -15 °C - 225 °C

Body in microcast stainless steel CF8M/316 Actuator in stainless steel AISI 304 Normally-closed, normally-open, double-effect function Seal in modified PTFE or PEEK Packing in PTFE and FPM Guided shaft for stable axial movement Self-centering ...

DN: 8 mm - 150 mm
Pressure: 16 bar - 64 bar
Temperature: -196 °C - 300 °C

... port way Ball Type Floating ball,fixed ball,V-shaped ball valve,The 3-way ball valve Stem Blowout-proof stem Seat Sealing Integral body seat ,seat welded and overlaid Valve ...

... ® a MIAM® GmbH product is a metal seated lift plug valve designed for special applications such as mediums with solids at high temperatures and/or pressures. Features of the INNO-CON: 90° shut-off ...

DN: 2 cm - 3.5 cm

• Lower permeability and pressure loss compared to elastomer valves • High system safety and chemical resistance • Maximum residual drainage and reusability due to better gas tightness • Long and position-independent ...

IVEK’s Ceramic Liquid Valves offer a durable high-performance alternative to “plug valves” commonly used in instrumentation Traditional polymer valves have a limited life due to material ...

DN: 1, 2 in
Pressure: 2,500 psi
Temperature: 260 °C

... minimises service time, thanks to top entry design and easy-to-service-seat Design offers choice of angle and globe valves Standardised 1" and 2" valves with variable trim options Choice ...

Pressure: 140 MPa

... This sériés of globe valves are mainly composed of valve body, valve core, adjusting rod, handwheel, etc. The valve body is made of steel forging, with ...

DN: 150 mm - 300 mm

... powder, granules and fibrous materials from cyclones, filters, hoppers etc., whilst maintaining an effective airlock. The valve consists of two flaps connected by counterweights or spring loaded spindles, which are ...

DN: 1 in - 4 in
Pressure: 10,000 psi - 20,000 psi
Temperature: -29 °C - 121 °C

Plug Valve is an important high pressure part for well service to allow and stop flow by plug rotation. Jereh plug valves are made from premium alloy steel, with special coating and heat treating ...

PTFE burette valve plug

DN: 10 mm - 100 mm
Pressure: 0 bar - 160 bar
Temperature: -20 °C - 220 °C

Large Flux, low resistance, no water hammer. Y type shape enlarged the flowing section, which could raise the flux by %30 and make flow more smooth. Super long working life, which help the stem adjust and lubricate itself automatically. ...

DN: 0.25 in - 3 in
Pressure: 0 bar - 40 bar
Temperature: -40 °C - 200 °C

Description 2/2-Way pressure controlled valve in poppet design Impulse without differential pressure Body Brass, Stainless Steel, Red brass

DN: 0.5 in - 2 in

V510 Series valves are having a V shape plug to provide smooth manually adjusted flow regulation.

DN: 0.75 in - 6 in
Pressure: 0 psi - 600 psi

The LSV-100® Control Valve is an economical control valve designed for flanged applications. Trim is replaceable in the field through the bonnet. Construction is Carbon or Stainless Steel with stainless ...