DN: 15 mm - 200 mm
Flow rate: 4 m³/h - 650 m³/h
Pennant offers atop guided globe type control valve to meet a wide range of automated process control applications. The product features a single-ported design configuration, which permits numerous trims, ...
Pennant Engineering
DN: 15 mm - 150 mm
Temperature: -200 °C - 593 °C
Neles series GU globe valves provide superior control performance and high reliability in wide range of applications. Standard units are equipped with Neles diaphragm actuators and Neles valve ...
Neles
DN: 0.5 in - 2.5 in
Pressure: 16 bar - 40 bar
Temperature: -40 °C - 250 °C
Self-actuated flanged or threaded EN or ASA Pressure reducing valve, suitable for steam, gases and liquids for reduce pressure in lines, available in different materials and pressure ranges.
EFSVALVES
DN: 30 mm - 1,000 mm
Pressure: 40, 63, 100 bar
Middle and low pressure valves The standard line of VAPTECH Spherical valves is designed for diameter range from 300 to 1000 mm and pressure ratings 40, 63 and 100 bar. The valve ...
Injection control valve Tasks Injection control valves are primarily flow control valves, which means they supply the required amount of cooling water to the point of use. The pressure ...
Welland & Tuxhorn AG
DN: 15 mm - 200 mm
Pressure: 16 bar
Temperature: -10 °C - 300 °C
Hight quality bellow sealed globe valve, with double titanium bellows.
Dansk Ventil Center A/S
Pressure: 28 bar
The main functions of the Shut-Off Valve are to start or stop fluid within the particular circuit it is installed. Applications The Henry Technologies’ range of Globe and Angle Shut-Off Valves ...
DN: 100, 150 mm
Pressure: 16 bar
Dry Pipe Valve The DN100 and DN150 TYCO Model DPV-1 Dry Pipe Valves are differential valves used to automatically control the flow of water into dry pipe fire protection sprinkler systems ...
DN: 15 mm - 65 mm
Free flow 2-way pneumatic on-off valves are the most effective response to fluid interception. Available in normally closed, normally open, double effect or manual operated.
Vapo Techniek B.V.
DN: 65 mm - 200 mm
Pressure: 10 bar - 160 bar
Temperature: 550 °C
Version Straight bonnet Cast steel body and bonnet Shut-off disc, Fig.No. 200 AE Throttle disc, Fig.No. 200 BE Outside screw and yoke Position indicator if required Turning and rising stem Pressure and temperature ratings Pressure ...
Pressure: 60 bar - 280 bar
Flow rate: 40 l/min
... - Technical information - Minimum purity of the medium: ISO 4406 19/17/14 (NAS 8) A and B versions with check valve - Height - 40 mm - Pressure range - 60 - 280 BAR - Flow - Max. 40 l/min
DN: 40 mm - 900 mm
MODULATING ALTITUDE VALVE- Single acting. Same construction as Model C000/CF000. Level control with modulation for final filling of storage tanks. CONSULT FACTORY for control valve price list for specific options.
Flomatic
DN: 29 mm - 155 mm
Pressure: 18, 8, 25 bar
Temperature: -5 °C - 110 °C
... Threaded end connections: • Standard female according to UNI ISO 228/1. Special executions: • EPDM seal. All the valves comply with the regulation 97/23/CE and are tested 100% on pneumatic seal with electronic control.
DN: 0.5 in - 6 in
Pressure: 15 psi - 50 psi
Temperature: -20 °F - 250 °F
Clark Globe Valves 1/2"through 2"are bronze body, NPT screw sort, and are appraised for ANSI Class 250 working pressures. The working temperature ranges from 20° to 250°f. The valve ...
DN: 0.5 in - 6 in
Pressure: 200 psi
... plug valve also available in flanged connection ends. With a semi steel construction, 200# WOG; 150# SWP. Rectangular port, semi-steel construction. Available in sizes 1/2" - 6" Series 820 (Screwed End Plug Valve) Screwed ...
P2/J2 series adopt unbalanced trim design, top guiding, and simple in construction. Suitable for most of service requirement. The actuator for P2/J2 series can be QLM series sliding pneumatic type or EML series electric type. P2/J2 ...
Wuxi Smart Auto-control Engineering Co., Ltd.
DN: 15 mm - 400 mm
Control valves with electrical actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -With recirculation for boiler feed water control with pump protection system by ...
ASCON TECNOLOGIC
DN: 40 mm - 250 mm
Control valves with pneumatic actuator -Flow control, mixing and distribution of liquids, steam and gases; two and three way -Steam desuperheating for pressure reduction and simultaneous cooling with water ...
ASCON TECNOLOGIC
DN: 15 mm - 20 mm
Threaded valves with 500 N actuator Valves from DN15 to DN20 -Heating, ventilation and air conditioning -Optional mechanical manual override -Self-calibrating proportional model
ASCON TECNOLOGIC
DN: 20 mm - 200 mm
Pressure: 50, 20 bar
Temperature: -50 °C - 427 °C
... linear or equal percentage Description Versatile Baker Hughes offers the Masoneilan 21000 Series heavy top-guided globe valve for a wide range of automated process control applications. The 21000 ...
DN: 7, 4 mm
Pressure: 1 bar - 10 bar
Temperature: -10 °C - 70 °C
PRESSURE SAFETY VALVE ► For maintaining the position of a double-acting cylinder if the operating pressure drops ► The valve consists of 2 check valves that are unlocked pneumatically
Pressure: 500 bar
Flow rate: 10 l/min
C2.9533 Pressure reducing valves C2.9533 Pressure reducing valves Poppet valve without overpressure function max. operating pressure 500 bar range of operating pressure: 0 - 500 bar adjustment ...
Pressure: 6, 10 bar
... provides you with an extremely compact and safe conveying device from a single source. On request, the Volkmann rotary valve is also available in a pressure shock-resistant version up to 10 bar and a pressure-resistant ...
DN: 0.25 in
Pressure: 350, 300 bar
Temperature: -20 °C - 80 °C
... additional valve block. Flow divider valve kit: main features Complete kit Additional block for flow divider valve Flow divider valve VDRF101 Oil port G1/4 15µm ...
DN: 15 mm - 250 mm
... Another important feature of the valve is that it is easy to adapt to the multi-channel structure, so that a valve can obtain two, three, or even four different flow channels.This simplifies piping design, ...
DN: 0.5 in - 2 in
Pressure: 200 psi
Globe valve refers to the valve with the shutoff (disc) moving along the center line of the seat. According to this form of disc movement, the seat opening changes in direct proportion ...
DN: 0.25 in - 2 in
Pressure: 0 bar - 17.2 bar
Temperature: -1 °C - 80 °C
... the main pressure ports, which enables the valve to exhaust at a higher flow than the main flow of the valve. This reduces the wait time to fully depressurize the down stream air system. The LV Series ...
DN: 5 mm - 100 mm
SELECTION VALVE FOR SUCTION CUP FROM Ø5 TO 100 Applications leak limiter for suction cups outside of the part
SAPELEM
Please specify:
Help us improve:
remaining