Hand-held shears

Plate thickness: 2 mm - 3 mm

- The Air Metal Shear is ideal for cutting metal in material thickness of up to 2.5 mm. Fast and precise applications are possible with its stroke rate of 2200hpm. Due to its very robust design, these shears ...

Plate thickness: 5, 3 mm
Pressing force: 294, 588 N

Range of pneumatic scissors for difficult cutting, carbon materials, kevlar, textile, fiberglass ...

Lightweight yet powerful, AirShirz® Standard pneumatic shears are designed to eliminate the stress related to the use of manual shears. Reduce the risks associated with cumulative trauma ...

- Capacity - steel: 1.2 mm - Capacity - aluminum: 1.6 mm - Air inlet: 1/4" NPT - Air consumption: 4 CFM - Weight: 1.1 Kg (2.4 lbs) - Length: 8 7/8" 227 mm

Shears for cutting: • Al and Cu single- and multistrand cables, outer diameter up to 5 mm • steel cable, diameter up to 5 mm Features: • shaped blades for easy cutting • lever optimizes the force required to cut NOTE: ...

With new improved blade design this heavy duty steel tool minimizes cutting force and blade wears thus producing smooth burr free cuts on wiring ducts and covers.

Working length: 254 mm

Berlin shape · Quality steel · For long straight cuts · All steel screw · Grey sand-blasted head · With open, curved handles · Fully hardened cutting edges · (58 HRC) Further technical information: · Handle: Plastic-coated · HRC: 58 · ...

Pressing force: 70 tf - 140 tf

... strengthen the side opening head and put the shearing material Quick joint Adopt thread joint,thread lock, compact structure High strength knife head Special steel heavy shear head, knife head strong, ...

Adjustable screw joint High cutting performance Burnished and ground surface 2-component handles

Light duty Pneumatic Hand Shear Machine Light weight Portable Easy to operate and maintain Un-skilled operator can run the tool It has fully adjustable stroke and the offset anvil is ...

Plate thickness: 12 mm
Pressing force: 70 kN

Cut Ø12 mmVoltage18V/4AhHydraulic power7 ton/280 barWeight including Lithium ion batterykg 6,7Dimensions450x100x310 mm

Description tooth jaw made of chrome molybdenum steel forged Technical data Gross weight - 530 g Packaging suitable for wall hanging - Yes

Plate thickness: 0 mm - 20 mm

The HBC-19 uses an electro-hydraulic design to handle virtually any rebar cutting job, from slabs and masonry walls to large buildings and bridges. Cuts rebar up to 0.75-inches (20 mm) thick in 3 seconds 115V, 60 Hz single-phase ...

Total weight 22.5 kg - max cutting capacity diameter 25 mm - connection voltage: VOLT 220/50 Hz single-phase - power consumption: 1400 W - cutting speed: 5 seconds - cutting pressure 30 ton. - dimensions: mm 525x175x243

• Ergonomic handle design • Shear most plastics,all kinds of aluminum,tin & steeel sheet up to 18 gauge (1.2mm) •Planetary gearing system for smooth operation

Plate thickness: 1.1 mm

Mod. 567 - Cod. 16302000 Pistol type air shear, with 1,1 mm cutting capacity.

Can also be used for hoses Smooth and accurate cutting, one hand operation Cutting blades changeable without tools Body in pressure-cast magnesium Enamelled blue Painted blue Scope of application ...

Plate thickness: 1 mm
Working length: 230 mm

Product details For continuous, straight and curved cuts Extremely compact cutter head with a partially countersunk head screw connection for increased manoeuvrability and precision for curved cuts Joint area screwed connection ...

Width of Cut7/32'' (5.5mm) Free Speed RPM2,500 Overall Length9'' (230mm) Air Inlet (PT)1/4'' Air Hose (ID) 3/8'' Avg-Air Consumption6.0 CFM (170.0 l/min) Net Weight2.2 lbs.(1.0 kgs) Packing Pcs/Ctn/G.W.(kgs)/Cuft10/Ctn/12.0/0.9'

Shearing machine for plastic cabletrays 90° cut 1m straightedge and stop Blade protected when not in use - Total weight : 18 KGS - Blade protected when not in use - Cuts raceways and covers and also plastic etching labels.

E-SHEAR: MOTOR + A40 Item No. 2921240000 A40 with narrow-edge ground UPPER blade

Plate thickness: 2, 3 mm

... Perfect for shearing and trimming of straight metal sheets or cutting of tubes No metal sheet distorsion Excellent view on the cut Very light for use Possibility to change the blades depending on applications > ...

Plate thickness: 2 mm

• material stop on rear side with adjustment via handwheel (0-450mm) • table extension at the front up to 300mm • automatically acting hold-down device for fixing the workpiece • easy and user-friendly operation due ...

Plate thickness: 5 mm
Working length: 55 mm

Anvil cutter with lever transmission (55 mm length of cut) Without stop faces. Works in all situations, suited to various materials. applicable materials: Holz Kunststoff Gummi PVC Leder Application / form: ...