Hexagonal nuts

Nominal diameter: 8 mm - 24 mm
Height: 4 mm - 12 mm
Width: 13 mm - 36 mm

Hexagon Thin Nuts with a fine thread ISO 8675 are used in bolted connections, e.g. as lock nuts to lock components and prevent accidental loosening, turning or shifting. In addition, ...

Toggle Pads (Steel) Steel（S45C） Case hardened(on contact face) Black oxide finish

Nominal diameter: 4 mm - 24 mm
Height: 5 mm - 28 mm

HELICOIL® nuts with integrated HELICOIL® Screwlock ensure secure screw joints. An efficient linking of two fasteners. The nuts comprise a nut body and an integrated HELICOIL® Screwlock ...

Nominal diameter: 6 mm - 20 mm
Height: 7 mm - 30 mm

... SEAL LOCK® sealing nuts provide a reliable seal against gas or liquids, even under high pressure. Easy to install, doubly reliable. SEAL LOCK® seals simultaneously inside the thread and below the head. The one-piece ...

... and unintentional nut loosening. Tool Longevity Other bolting systems put the reaction arm and square drive on opposite sides of the tool causing high stress in the body of the tool, which can lead to failure over time. ...

... Gall Free Nut is the new anti-galling technology in a standard hex nut. The HYTORC Gall Free nut in combination with the HYTORC Washer guarantees the elimination of galled or damaged ...

SEAL LOCK® sealing nuts provide a reliable seal against gas or liquids, even under high pressure. Easy to install, doubly reliable. SEAL LOCK® seals simultaneously inside the thread and below the head. The one-piece ...

Height: 6 mm - 22 mm
Width: 7 mm - 36 mm

Hexagon nuts with polyamide thread lock high type, DIN 982 Material: Steel or stainless steel (A 2) Version: Galvanised steel. Bright stainless steel. Note: When screwing the nuts ...

Nominal diameter: 6.8 mm - 24 mm
Height: 4.95 mm - 16 mm

Cap nut compact in Hygienic DESIGN Material: Stainless steel 1.4404. Version: Polished. Note: The surface of the cap nut is polished and, with regard to design optimised for the use in hygienic environments. ...

Nominal diameter: 10 mm - 70 mm

Steel nuts are suitable for clamping procedures, adjusting movements in manual operation, and as fastening nuts.

Nut to be used in conjunction with a hammer head screw Measures: M6 / M8 Material: Zinc plated steel / stainless steel

Nominal diameter: 4 mm

Blind Rivet Nuts "GO-NUT" Flat Head, Semi-Hexagonal Shank, Open Type, Stainless Steel A2 Clamping range max. - 2,5 Packaging - Goebel Clamping range min. - 0,5 Length (mm) - 11,5 ø - 6,0

Nominal diameter: 10 mm

Blind Rivet Nuts "GO-NUT" Small Countersunk Head, Semi-Hexagonal Shank, Open Type, Stainless Steel A2 Clamping range max. - 4,0 Packaging - Goebel Clamping range min. - 1,0 Length ...

Nominal diameter: 12 mm

Blind Rivet Nuts "GO-NUT" Flat Head, Hexagonal Shank, Open Type, Steel Zinc Plated Clamping range max. - 4,0 Packaging - Goebel Clamping range min. - 1,0 Length (mm) - 25,5 ø - 16,0

Nominal diameter: 5, 6, 8 mm
Height: 12, 13, 9.5 mm
Width: 8, 10, 12 mm

THREADED TUBULAR RIVET NUT WITH FLUSH HEAD AND HEXAGONAL SHORT SHANK Family Deformation Threaded Insert Type of product Deformation Threaded Insert Receiving ...

Nominal diameter: 12 mm
Height: 36.5, 39.5 mm
Width: 18.5 mm

DEFORM-NUT® E TFM/CH M12 - THREADED TUBULAR RIVET NUT WITH FLUSH HEAD AND HEXAGONAL SHANK Family Deformation Threaded Inserts Type of product Deformation Threaded ...

Nominal diameter: 2.5 mm - 6 mm
Height: 1.5 mm - 3.9 mm

SELF-CLINCHING HEXAGONAL NUT Family Self-clinching threaded nuts Type of product Self-clinching nut Receiving material Light Alloy, Stainless Steel, Steel Assembly Pressure Coating In ...

Nuts made of molybdenum and the molybdenum alloy TZM are available in the Plansee Online Shop. Order fast and easily from the producer's online shop: www.plansee.com/shop

Nominal diameter: 2.5 mm - 39 mm

Nominal diameter: 2 mm - 42 mm

Nominal diameter: 3 mm - 36 mm

Nominal diameter: 3 mm - 24 mm
Height: 6 mm - 42 mm
Width: 5.5 mm - 36 mm

Cap nuts DIN 1587 Packaging: Standard or according to customer specification Material: Steel non-plated, zinc-plated, nickel-plated, brass non-plated, nickel-plated acc. to DIN EN ISO 4042, further finishes on ...

Nominal diameter: 1.6 mm - 48 mm
Height: 1.3 mm - 38 mm
Width: 3.2 mm - 75 mm

HEXAGON NUT - STAINLESS STEEL A2 - DIN 934 INOX A2 - DIN 934

Nominal diameter: 3 mm - 20 mm
Height: 3.7 mm - 20 mm
Width: 5.5 mm - 30 mm

PREVAILING TORQUE TYPE HEXAGON NUT, ALL METAL - STAINLESS STEEL A2 - DIN 980 INOX A2 - SIMILAIRE DIN 980

Nominal diameter: 6 mm - 16 mm
Height: 9.5 mm - 22 mm

SELF-BREAKING LOCK NUT - STAINLESS STEEL A2 INOX A2

Nominal diameter: 8 mm - 16 mm
Height: 12 mm - 24 mm
Width: 13 mm - 24 mm

Fixture nuts according to DIN 6330 have a spherical surface to match conical seats DIN 6319 (EH 23050.). With this combination of fixture nut and conical seat, non-parallel clamping surfaces can be ...

Nominal diameter: 8 mm - 16 mm
Height: 9 mm - 24 mm
Width: 13 mm - 24 mm

The collar nuts (flanged nuts) are manufactured accoring to DIN 6331. Material Heat-treated steel, tempered, quality 10, phosphated

Nominal diameter: 8 mm - 16 mm
Height: 24 mm - 48 mm
Width: 13 mm - 24 mm

In comparison to a hexagon nut according to DIN 6330, the extension nuts are elongated and are particularly suitable as a connecting piece for stud bolts. Material Heat-treated ...

Nominal diameter: 6 mm - 48 mm
Height: 18 mm - 144 mm
Width: 10 mm - 75 mm

Nominal diameter: 8 mm - 24 mm
Height: 14 mm - 42.5 mm
Width: 17 mm - 44 mm

Nominal diameter: 2 mm - 24 mm
Height: 1.6 mm - 21.5 mm
Width: 4 mm - 36 mm

Searching for hexagonal nuts? If you are looking for plastic wing, hexagonal or knurled nuts or if you are looking for nut then you are definitely on ...

Nominal diameter: 5, 8, 6 mm
Height: 4.2 mm - 6.5 mm
Width: 8 mm - 13 mm

Searching for clear hexagonal nuts? If you are looking for plastic wing, hexagonal or knurled nuts or if you are looking for nut then you are definitely ...

Nominal diameter: 3 mm - 16 mm
Height: 3.2 mm - 15.8 mm
Width: 7 mm - 36 mm

Searching for washer nuts? If you are looking for plastic wing, hexagonal or knurled nuts or if you are looking for nut then you are definitely on the right site because ...

Nominal diameter: 6, 8, 10, 12 mm
Height: 5.9, 7.8, 8.9, 11.7 mm
Width: 10, 13, 14, 18 mm

Flange Nut ribbed, stainless steelMaterial: stainless steelColor: naturalPackaging Unit: 50 pcs.Extras: Also available in zinc-plated steel

Nominal diameter: 8, 6 mm
Height: 5.8, 7 mm
Width: 10, 13 mm

Flange Nut ribbed Material: zinc-plated steel Color: galvanized Packaging Unit: 50 pcs.

Nominal diameter: 22, 16 mm

KEY FEATURES Various materials on request MATERIAL Q235

Nominal diameter: 8 mm - 60 mm

Blind rivet nuts with continuous hexagonal (Hexaform) or partial hexagonal shank (Hexatop) are another possibility to avoid the rotation of the fastener in the component as alternative ...

Blind rivet nuts with continuous hexagonal (Hexaform) or partial hexagonal shank (Hexatop) are another possibility to avoid the rotation of the fastener in the component as alternative ...

Nominal diameter: 18, 22, 26, 32 mm
Height: 13.5, 17, 20.5 mm

Includes spherical nut and spherical washer. Made from alloy steel with a black oxide finish.

Nominal diameter: 6 mm - 24 mm
Height: 18 mm - 72 mm
Width: 10 mm - 36 mm

Also known as extension nuts, they are commonly used in jig and fixtures to provide height adjustments. Made from heat-treated 1045 alloy steel with a black oxide finish.

metric screw threads We handle a wide variety of materials and plating.

metric screw threads We handle a wide variety of materials and plating.

metric screw threads We handle a wide variety of materials and plating.

Nominal diameter: 3 mm - 36 mm
Height: 6 mm - 61 mm

Our Domed Hex Nuts, also known as Acorn Nuts or Cap Nuts, are manufactured to DIN 1587 are not threaded all the way through, which provides protection to the thread as well as an aesthetically ...

Nominal diameter: 2 mm - 48 mm
Height: 1 mm - 24 mm

... Commonly Used For: To install on externally threaded components Also Refered to As: Half Nuts Jam Nuts Thin Nuts Equivalent Standards: DIN EN ...

Nominal diameter: 2 mm - 56 mm
Height: 1 mm - 45 mm

Our Full Hex Nuts, or Hexagonal Nuts as they are also known, are manufactured to DIN 934 from high performance stainless steel, which provides an excellent level of resistance and strength ...

Nominal diameter: 12, 16, 20, 24 mm
Height: 19, 10, 13, 16 mm
Width: 36, 19, 24, 30 mm

SHNDS is a duplex stainless steel hexagon nut. Duplex stainless steel has the great properties of both austenitic and ferritic steel. It has an excellent strength and corrosion resistance compared to ...

Nominal diameter: 3 mm - 10 mm
Height: 2.4 mm - 8 mm
Width: 5.5 mm - 17 mm

Hex Nuts / Hex Flange Nuts - Titanium Specific gravity is approximately 60% of stainless steel. Nonmagnetic. Excellent chemical and seawater resistance. Chemical polishing and brightening processing ...

Nominal diameter: 6 mm - 16 mm
Height: 5 mm - 13 mm
Width: 13.5 mm - 30 mm

SHNRS is a theft prevention nut for security purposes. It can be mounted with commercially available tools and no extra tools are required.. For removal, the dedicated removal tool SKW is required. Only cover nuts ...