High-rigidity machining centers

X travel: 1,050 mm
Y travel: 900 mm
Z travel: 1,050 mm

The FH630SX-i is a powerful, high-speed horizontal machining center featuring an 8,000 RPM spindle, with the option of a 15,000 RPM high-torque spindle, and a rapid feedrate ...

Table load capacity: 400 kg

DD motor of B-axis realizes fastest feed rate speed in class ATC/APC options support unmanned operation and flexible manufacturing system. Usability Operation Panel Matsuura G-Tech31i （iHMI,15-inch touch panel type） Usability ...

X travel: 850, 760, 1,300, 1,200, 1,000 mm
Y travel: 400, 500, 600, 650 mm
Z travel: 500, 600, 650 mm

... machine bed and main structure are cast in gray cast iron with good rigidity and shock absorption. The ribs are arranged inside the bed, therefore the bed structure is heavy. HIGH STABILITY The ...

X travel: 800 mm
Y travel: 500 mm
Z travel: 510 mm

... guarantees a highly rigid machining platform, providing exceptional vibration damping, especially on intermittent cutting across a wide range of materials, such as Inconel, titanium, cast iron or stainless steel. The ...

X travel: 800 mm
Y travel: 855 mm
Z travel: 500 mm

... C‑axis is higher Highly efficient due to high stiffness and optimum layout of the mass inertia Two-sided support of the C‑axis for high stability and precision Counter bearing dimen­sioned ...

X travel: 500 mm
Y travel: 560 mm
Z travel: 450 mm

... enhanced rigidity for high performance and quality machining. This range is ideally suited for complex parts in 3 or 5 axes, from roughting to finishing, for various sectors such as ...

X travel: 560 mm
Y travel: 410 mm
Z travel: 450 mm

... body construction makes for uncompromising precision and rigidity. High Stability Tool Magazine Inverter controlled, prevents tool change speed ...

X travel: 2,500 mm - 20,500 mm
Y travel: 2,600, 4,000, 2,000, 1,300 mm
Z travel: 2,000, 1,300 mm

... component finish, high machining speeds, reliability, structural rigidity, operating flexibility and outstanding productivity. ethos machine is also available with: • - double bridge ...

X travel: 510, 800 mm
Y travel: 420, 460 mm
Z travel: 510 mm

*FEA Analysis High Reliability: *Roller type motion system High Efficiency: *V-32A.V-42A.V-52A with high torque spindle motor High Flexibility: *4/5 ...

X travel: 500, 800 mm
Y travel: 1,200, 1,400 mm
Z travel: 400, 800 mm

... comes into play. All machining steps in one setup With the AM, spindles can be arranged at both sides as well as on the top of the machining area. Therefore, pre-machining and bolt ...

X travel: 6,000 mm - 36,000 mm
Y travel: 4,000 mm - 10,000 mm
Z travel: 1,500 mm - 2,500 mm

... machine performance and safety: Digital drives for all axes Feedback by Heidenhain linear scales: resolution of .001 mm (.00004”) Operator Shielding. The use of the latest Siemens 840 D and Sinumerik One CNCs ensures ...

... highly productive system. All degrees of freedom in machining with maximum rigidity of the machine construction offer quality at the highest level. With the different types, large and ...

X travel: 560, 600 mm
Y travel: 600, 580 mm
Z travel: 800 mm

A600 ensures rigid and accurate machining with its in-house designed spindle and cooling of the spindle and frames minimizes thermal deformation to ensure high precision during long-time machining. Hwacheon ...

X travel: 60 mm
Y travel: 60 mm
Z travel: 180 mm

... robust frame weldment that is precision machined by the finest German craftsmen. It incorporates engineering and design excellence with the finest materials and components used in its creation. The results: a machining ...

X travel: 650 mm
Y travel: 520 mm
Z travel: 320 mm

... coefficient, high corrosion resistance and good mechanical properties, high heat stability, high damping vibration reduction performance and high dynamic ...

X travel: 660 mm
Y travel: 1,020 mm
Z travel: 500 mm

High Speed and Outstanding Surface Finish Great for Aerospace & Automotive Industries • One-piece casting absorbs thrust forces of high rapids and fast cutting feeds • One-piece. double-column ...

X travel: 720, 620 mm
Y travel: 520, 600 mm
Z travel: 460, 520 mm

The new 5-axis machining centres MATEC FUV 620 I 720 have been designed to produce intricate parts and shapes in 5 axes. The machine design provides for a high rigidity and concentration ...

X travel: 500 mm
Y travel: 300 mm
Z travel: 300 mm

X travel: 3,230, 4,230, 5,230, 6,230, 8,230 mm
Y travel: 2,450 mm - 3,850 mm
Z travel: 1,100 mm

High Rigidity Double-column Machining Center All 3 axes travels are fully supported by boxway hereby ensuring the rigidity and stability. 3 ...

X travel: 0 mm - 1,100 mm
Y travel: 0 mm - 600 mm
Z travel: 0 mm - 600 mm

... bonus is the compact dimensional design and casting, which keeps the advanced performance in a smaller footprint. 2.high precision roller screw and guide way center ...

X travel: 1,500 mm
Y travel: 800 mm
Z travel: 300 mm

CNC vertical milling machine VM-8015NC is mainly heavy milling surface machine. The integrated high rigidity T-shaped bed, double- column structure and crosswise overhangless structure ...

X travel: 3,240, 5,060 mm
Y travel: 5,060 mm
Z travel: 200 mm

... "Custom" Project series and offer flexibility of use, reliability and high productivity. Winner 385 is the perfect combination of the flexibility 5-axis operating unit and high stiffness of the bridge ...

X travel: 240 in
Y travel: 24 in
Z travel: 17.5 in

... your toughest milling needs. Customizable for you: Choose between our accessory options for a perfect fit for your workshop. The CM-20-02 is a long-bed vertical machining center ...

X travel: 270 mm
Y travel: 120 mm
Z travel: 220 mm

... guarantee a high degree of rigidity between the tip of the tool and the workpiece to be machined. The high performance powered spindle, specially developed for the 301S2, ...

X travel: 91 in
Y travel: 150 in
Z travel: 53 in

... Compact High Rail, or CH Series for short, CNC machining center is based on a heavy, one-piece, engineered (thick-walled) steel base with internal steel reinforcements, ...