I/O modules

High-speed counting, along with position detection using an array of different displacement transducer technologies, both absolute and incremental, is an essential element of many automation applications. With the EtherCAT Box modules ...

Input Module IO 113 designed to interface with pump sensors. One without communication as standard variant and one with communication for interface to Sensor Module SM 113

6 digital inputs (+24 V DC/3.5 mA) Input delay: 1 µs 8 digital short circuit proof outputs (+24 V DC/0.5 A/backreadable) 1 analog input (±10 V DC/16 bits) 1 analog current input (0-20 mA resp. 4-20 mA/16 bits) For the S-DIAS system, ...

Hitachi´s newest Remote I/O series provides the best support on future oriented and enhanced application.The strength of this series is the flexibility by gathering machine information within decentralized applications with the combination ...

... outputs. With a robust aluminium die-cast housing, a total current of up to 60 A can be delivered. TECHNOLOGIES The I/O-Module supports the CANopen and CANopen-safety protocols.

The USB-DIO96H Series of USB digital devices provide a higher channel count than other digital devices. Each device provides high current, logic-level, bidirectional digital I/O and counter operation, and is designed with a heavy-duty ...

LonWorks Network The LON (Local Operating Network) technology is a network control system developed by Echelon, USA. The LON technology is an intelligent, distributed network for communication with various sensors and actuators at a ...

Up to PLd in accordance with EN ISO 13849-1 and SIL2 in accordance with IEC 61508 Screwless terminals for easy installation Status diagnostics via control outputs and LEDs Number of sensors can be increased to 4 per ...

Analogue signals are transmitted to the controller or supplied to the peripherals with the highest accuracy and interference immunity. A microcontroller converts the measured values of the analog inputs and outputs with the calibration ...

Host Interface Ethernet # of Ports 4/4 Brand/Family eI/O Digital I/O Isolated Inputs, Form C Relay Outputs RoHS Yes Number of Inputs/Outputs 4 Inputs, 4 Outputs Power Requirement 9-30 VDC @ 5W Input Range 5-30 VDC Input Isolation 2500 ...

The Syslogic USB mini card is a software-configurable expansion card with four analogue inputs. The analogue I/O module can be configured for four voltage ranges: 0 to 5V, –5 to +5V, 0–10V and –10 to +10V. The analogue I/O module has ...

To transform Revolution Pi into an industrial control unit, various digital I/O modules can be connected to the base module RevPi Core. The I/O modules come in three versions. All have the same 28-pin I/O connector at the front (connector ...

Dedicated I/O expansion modules Various models available to I/O requirements Communications via CAN with Centurion™ controller Type J or K Thermocouples or 100Ω Pt 3-wire RTD temperature measurement B+ or B- Digital inputs Low ...

Acquisition and actuation module, usable as extension for operator panels with integrated logic ( ATR313, TD329, TD240) or SCADA software. In a standard container DIN43880 9 modules for rail mountain, there are 4 controllers with universal ...

Get multivariable outputs and a powerful configuration and maintenance interface in a convenient, easy-to-install package. This smart module provides fast access to flow, density, temperature and many other parameters. Features ...

The PCM-UIO96C-16 is a highly versatile PC/104 input/output module providing 96 lines of digital I/O. One important feature of this card is its ability to monitor 48 of the 96 lines for both rising and falling digital edge transitions, ...

The Ixxat Safe T100/CS offers device manufacturers an easy way to control safe I/O signals using a safe fieldbus protocol. The module meets the SIL3 safety requirement level as defined by IEC 61508 and Performance Level PLe / Category ...

Product features • LPCB approval. • Semi-flush or surface mount. • Lever reusable (non-glass break). • LED indicator. • Full soft addressing, and rewriting through CODER-9001 encoder in site. The A9056T I/O module (A9056T for ...

The ANTARES 8AIH Remote I/O Module is suitable for the direct linking of 8 intrinsically safe two-conductor transmitters. NAMUR sensors, optocouplers, wired and unwired mechanical contacts or other actuating elements can be connected ...

-Wall mounting -Base supports 2 I/O modules only (not expandable) -Secure easy-to-use module mounting -Hot Plug-in of I/O modules -Automatic I/O module identification and scanning -Optional module keying Maxiflex 2I/O Master Base ...

SimpleHome module with 5 optically coupled inputs (4 normal + 1 scenario), for connection of buttons in the vicinity of the electrical panel and 4 relay outputs with N.C./N.O. switching contact to control resistive electrical loads up ...

CEDIO-P 24/24/2 With 48 digital I/O and 2 analog outputs on board it is the controller with highest I/O packing density.

Rack-Mount Remote I/O Module The SEL-2506 Rack-Mount Remote I/O Module has eight digital inputs, eight digital outputs, and a fiber-optic communications port. Connect an SEL-2506 to a fiber-optic port or transceiver on a protective relay ...

The Curtis Model 1352 eXM CANbus Hydraulic Input/Output Expansion Module can be added to any CANbus based control system utilizing the CANopen communication bus protocol. It provides a simple, flexible and cost effective method of controlling ...

FSoE slave module for safe speed and position of one axis for further evaluation in an FSoE master unit. 14 safe digital inputs Up to 4 safe digital outputs 2 Encoder interfaces 2 Relay / clock outputs 2 Auxiliary ...