I/O modules

Power-Supply 9..24 V DC Size 35 x 68 x 82 mm (W x H x T), equals 2 TE Ethernet LAN port TFTP firmware update The LyconSys I/O modules are the optimal solution for controlling analog and digital I/O signals in a network. Our I/O ...

The PLC TPLC050 has a modular and flexible structure based on ARM9. The inputs and outputs of the TPLC050 are expandable by adding Mect MPNC030 and MPNC035 series modules for analog signals and MPNC020 for digital signals. The analog ...

Mikrodev RTU products provide control, data acquisition and communication in the most demanding environments. While providing process and communication security with Hot Stand-by Redundant CPU modules, it also provides redundant supply ...

• supply voltage 24V= • 4 outputs SPNO 230V-= max. 5A or transistor (PNP) 24V= max. 800mA or photomos max. 2A • LED indicators for inputs and outputs • 1 potentiometer supply voltage 24V= ±10% power consumption 0,5W nominal output ...

The KET-DDX-410, designed for the realisation of control systems used in building automation, is an I/O module with 4 digital inputs for dry contact (max 30 Hz) and 4 digital SPDT relay outputs type NC C NO with capacity 12 A @ 250 VAC, ...

The UNIGO computer system already has some I/O capabilities beyond the standard PC interfaces. This includes various inputs, some 12V outputs and ground contacts. However, sometimes this are not enough to connect the system with the intended ...

Industrial Cellular Remote I/O - Quick configuration by USB and Cloud - Reporting updated status to Cloud if any inputs are detected - Hundreds of combinations of trigger conditions and actions - Built-in opto-isolated digital inputs ...

Brand: GCAN Model: GC-1008~GC-8012 Application: Input and output modules Type - Characteristic - Signal - Channel Digital input - GC-1008 - Digital input (PNP) - 24V DC - 8-channel GC-1018 - Digital input (NPN) - 24V DC - 8-channel GC-1502 ...

8-way multi-TTL digital input / output, instruction configuration, real-time adjustment 2 independent PWM outputs can be configured instructions, real-time adjustment, the base frequency 50Hz ~ 10000Hz, resolution 0.5% Network up to ...

The DC-IO## control module has been designed to operate the 125-230Vac or 12-24Vdc outputs and digital inputs through a RS485 communication port. VERSIONS: DC IO- 8 - 4 relays and 4 digital inputs per module. DC IO- 12 - 8 relays and ...

INGESYS™ IC2 has a modular and expandable design that permits to achieve an optimal hardware solution for each application. Two control topologies are available: - Centralized topology In this topology the Controller is integrated ...

The 207-ADIO-KIT is an 8-channel Analog Input (AI), 2-channel Analog Output (AO), 8-channel Digital Input (DI) and 8-channel Digital Output (DO) slave module with the pluggable terminal block. With EtherCAT® control, it will lead to fast ...

FEATURES - AD/DA converter module - channels galvanically isolated - 16 analog inputs (16 bit, ±10V, ±5V, ±2V, ±1V) - 250kHz sampling rate - 2 analog outputs (16 bit, ±10V) - integrated RISC controller ASSEMBLE MEASUREMENT CARD. ...

Operating Temperature Range –20~70°C 8 channel analog input (0~5v or 0~20mA) , 12 bit 8-point isolated digit input 5-48 VDC(with SOE), or 8-point single channel counters up to 1 KHz 8-point relay output, 250VAC 5A per point ...

Rack-Based Specialty I/O Over 20 years ago, our direct interface technology was referenced within the Rockwell Automation “Pyramid Solutions Program,” now the “Encompass Program.” Since that time, AMCI has developed a complete selection ...

MOD I/O* - The new add-on module for the Solar-Log Base The I/O module is the perfect addition to Solar-Log Base, enhancing its capabilities. With the numerous digital inputs and outputs of the I/O module, you are fully equipped to meet ...

CIO is a versatile I/O module for the CAN bus. Designed for industrial series applications it has a robust and cost efficient layout. CIO supports 8 digital 24V/500mA output and 8 analog input channels. The inputs are splitted in 0-10V ...

-High-speed USB 2.0 multifunction DAQ -Sustained sampling speeds up to 1MHz -16-bit or 12-bit resolution A/D converter -Flexible, software configured functionality -16 single-ended or 8 differential analog inputs ...

The IO-Link Master Stack gives control system and machine tool providers an easy way to integrate state-of-the-art IO-Link technology into their products. It provides full access to all features and services defined in the IO-Link ...

SMART CONNECTION. GRIPLINK brings the end-of-arm tool directly into your robot controller. GRIPLINK reduces the effort involved in integrating smart automation components into industrial robot applications to a minimum. GRIPLINK ...

Key Highlights & Features •8 I/O Module •AC Power supply •Analogue Output Module •Physical Hardware Seal •RS232/RS232 Module •RS485/RS485 Module •Stainless Steel Dust Cover The C500 Series flexibility is provided through its ...

I/O remote extension modules can provide customers with more choices and more topology.

The NA2000 digital output expansion module can be used to connect devices such as solenoid valves, contactors, low-power motors, lights, and motor starters. Technical performance index Up to 16 output channels. The output mode ...

The module has a compact aluminium housing and offers the possibility of top hat rail mounting. The interfaces are quickly and con­ve­nien­tly avail­able on the front panel. Using the 3-wire con­nec­tion technology, all sensors can be ...