In-line flow meters

• Venturi Nozzles • Calculation, Design and Manufacture to BS EN ISO 5167:1 • Fabricated from Plate or Machined from Bar/Forgings • Range of Material Grades • Pipe Sizes from 50 mm to 1200 mm • Calibration Service on Request There ...

Process temperature: -20 °C - 180 °C
Process pressure: 250 bar
Precision: 0.15 %

Magnetic-inductive sensor for a wide range of applications Our magnetic-inductive sensors (MID) are precision measurement devices and suitable for linear flow measurement of almost all electrically conductive liquids, as well as slurries, ...

Process temperature: 20, 60, 100 °C
Process pressure: 1,013 mbar

The MPB Series 1700 Variable Area Flowmeter offers an economical solution for the instantaneous reading of a wide range of flows including most process gases and liquids. The MPB Series 1700 Variable Area Flowmeter is ideally suited ...

Volumetric flow rate: 0 m³/h - 280.02 m³/h

IZMAG Electromagnetic Flow Meter : "IZMAG" provides accurate measurement of all electrically conductive liquids. Unrestricted flow tube design provides no constraints on process flow or product consistency. Equipped with an integral ...

Process temperature: -20 °C - 60 °C
Process pressure: 10,000 Pa

APPLICATION One instrument for measurement of pressure, air flow, temperature and relative humidity Is tested to comply with standards for ’Ventilation for buildings – test procedures & measuring methods for handing over installed ventilation ...

VAF Instruments positive displacement liquid Flowmeters are the most accurate volumetric measurement system for your installation. Highly accurate measurements for a wide range of liquids from low-density to vicious petrochemical products. ...

The DLM is a compact in-line measurement system for the continuous recording of bulk solid streams using non-impact force measurement. The material stream is “gently” deflected via an in-line measuring chute. The system ensures that impact ...

Process temperature: 0 °C - 80 °C
Process pressure: 3.5 bar - 7.5 bar
Repeatibility: 0.03 % - 0.3 %

This leading-edge pressure insensitive mass flow module is installed with differential pressure detection and a piezo actuator valve. The high level of performance provided by the CRITERION D500 ensures it can be used for a range of ...

Process pressure: 2 MPa

Exempted Source Spool Piece (SP) MPFM is a new technology developed in a very compact design for monitoring and testing oil and gas wells in full Gas Volume Fraction (GVF) range, with a gamma source of extremely low activity, classified ...

Process temperature: -20 °C - 70 °C
Process pressure: 0 bar - 16 bar

The SITRANS F M MAG 8000 program of battery-operated water meters gives you the flexibility to install a reliable water flow meter virtually anywhere without sacrificing accuracy or performance. The SITRANS F M MAG 8000 program features ...

Volumetric flow rate: 0.2 m³/h - 212 m³/h
Process temperature: -20 °C - 60 °C
Process pressure: 0 bar - 16 bar

The EE741 in-line flow meter can be easily adapted for any measuring task. It is dedicated for accurate metering and monitoring of compressed air and technical gases in DN 15 to DN50 pipes. The thermal measuring principle and the well ...

Volumetric flow rate: 7 l/min - 120 l/min
Process temperature: 16 °C
Process pressure: 20, 100 bar

is a digital flow meter with turbine suitable for diesel monitoring and digital management of the fluid dispensed. PRECISION AND QUALITY The K24-A digital diesel flow meter has been designed to monitor the flow of low-viscosity fluids. ...

Volumetric flow rate: 0 l/min - 500 l/min
Process temperature: 0 °C - 50 °C
Process pressure: 0 bar - 10 bar

Thermal mass flow meter based on high precision MEMS technology (CMOS sensor). Pressure and temperature insensitive according to the CTA constant temperature principle. Also insensitive to pressure surges. Media: compressed air ...

With an unmatched accuracy level of 1% of Full scale on the dynamic control range, the M330B Low Pressure Drop Thermal Mass Flow Controller is one of its class. It is very specifically designed for sensitive applications where a low pressure ...

Process pressure: 0 bar - 15 bar
Precision: 5, 10 %
Repeatibility: 1.5, 0.5 %

Demanding applications across industries at up to 5 ml/min Designed for integration in demanding flow control systems, the SLI liquid flow meter series is a high precision solution for low flow rates of liquids based on water or hydrocarbons ...

Volumetric flow rate: 0.1 l/h - 1,000 l/h
Process temperature: -20 °C - 80 °C
Process pressure: 0 bar - 15 bar

Control panels, pilot plants, measurement and control on machinery, water purification (osmosis), control of gas burners, industrial and process refrigeration, treatment ovens. Materials Flow tube: borosilicate glass Wetted parts: ...

Process temperature: -40 °C - 200 °C
Precision: 1 %

The Clamp-on Ultrasonic meter for Standard Volume Flow Measurement and API Determination in the Hydrocarbon Processing Industry FLUXUS H721 is FLEXIM’s flow and analytical measuring system for the hydrocarbon processing industry (HPI). ...

Process temperature: 0 °C - 49 °C

Bubbler level sensing provides the most accurate measurement. Teledyne Isco 730 Bubbler Flow Modules use an internal air compressor to force a metered amount of air through a bubble line submerged in the flow channel. By measuring the ...

Micro Motion R300S Coriolis Meter, 3 Inch (DN80), 316L Stainless Steel - Achieve high-performance basic liquid mass flow and volume flow measurement in a compact design Increase flexibility with available 316L stainless ...

Volumetric flow rate: 0 l/min - 420 l/min
Process temperature: 0 °C - 90 °C
Process pressure: 0 bar - 420 bar

High accuracy turbine flow meters with built-in loading valve and thermistor, for use with hydraulic fluids. Flows up to 400 lpm (100 US gpm). For use with oils, fuels, phosphate-esters Bi-directional loading valve with INTERPASS(TM) ...

Process temperature: 0 °C - 50 °C
Process pressure: 0.2 bar - 11 bar
Precision: 1, 2, 3 %

The red-y compact series mass flow meters are characterized by powerful technology, intelligent functions and innovative design. The devices offer a new level of ease of use: compact design with battery power, backlit touch display ...

Mass flow rate: 325 kg/h
Volumetric flow rate: 325 l/h
Process temperature: -60 °C - 200 °C

The TRICOR PRO TCMP 0325 Coriolis meter is a combination Density meter and Mass Flow Meter with a maximum mass flow rate of 325 kg/hr (12 lb/min) or 49 bbl/day, and a nominal size of DN4 (1/8”) that provides native measurement outputs ...

Volumetric flow rate: 0.3 us gal/min - 30 us gal/min
Process pressure: 500 psi - 1,500 psi
Precision: 2 %

The PI series has the following characteristis and/or options: 10:1 turn down ratio Less sensitive to viscosity change Mechanical pointer and scale readout Optimized for circulating lubricants with viscosities between ...