Industrial pumps

Flow: 0 m³/h - 3,500 m³/h
Head: 0 m - 105 m

... priming centrifugal pump that is suitable in applications such as clean water, seawater, brines and alkaline liquids in water supply, dust extracting and spray-coating plants, etc, in thermal range of up to +90°C (+140°F). ...

Flow: 28 l/min - 148 l/min
Head: 15 m - 17 m

The best solution for suction and transfer of liquids, thanks to the strong self-priming capacity and the ability to run even with discontinuous presence of the liquid in the suction. The ECC series, made of brass CB754S with DC motor ...

Flow: 3,000 m³/h

The EN 733 MU Series of End-Suction Centrifugal Pump, manufactured by Pompe Garbarino S.p.A., is specifically designed for fresh and sea water, condensate, oils, chemical and petrochemical products. It is mainly used ...

Flow: 0.7 l/min

... from WELCO are peristaltic pumps that are made from advanced Japanese technology. By combining various components, these pumps perform at a rate of 0.5 mL per minute up to an optimal level of 670 mL ...

Flow: 0 us gal/min - 178,000 us gal/min
Head: 0'00" ft - 152'00"

Axial Mixed Flow Pumps Vertical, wet pit design pump for Circulating Water Service (including condenser). Specifically designed for the nuclear industry, it features a number of hydraulic designs, and ...

Flow: 10 m³/h - 20,000 m³/h
Head: 3 m - 300 m

PRODUCT FEATURES Expect more with the improved design and above standard, standard materials options of the e-XC split-case pump: Xylem's proprietary mechanical seals - carbon/silicon carbide seal with an EPDM elastomer ...

Flow: 15 m³/h - 18 m³/h

... varies depending on the type of auger pump installed. The 7515 up to a maximum grain size of 8 mm conveys up to 15m3/h. With the 2L8 auger pump (up to 12 mm grain size) speeds of up to 18m3/h can be reached.The ...

... Please note that the media temperature shouldn't surpass 70° C for common pump and 300° C for anti-high temperature oil pump. The pump has safety valve itself for protection when the ...

Flow: 180 l/min
Head: 9 m

Flow: 160 m³/h - 306 m³/h
Pressure: 2 Pa
Power: 5.5, 7.5 kW

... Use built-in forced fed oil pump to ensure long-term continuous operation of the pump under normal pressure. ·Adopt air-cooled, oil-cooled, water-cooled and other cooling methods to ensure a good cooling ...

Flow: 60 l/min
Pressure: 180,000 Pa - 350,000 Pa
Power: 750 W

... fuel dispenser parts, pump/meter/nozzle, 30year experience on fuel dispenser Hot Tags: CP1 Pump And JSJ2 Meter, China CP1 Pump And JSJ2 Meter, CP1 Pump And JSJ2 ...

Flow: 468 m³/h - 1,008 m³/h
Head: 20 m - 94 m
Power: 0 kW - 560 kW

Models of Excellence's EGM Series of centrifugal slurry pumps are standard cantilevered, horizontal slurry pumps, engineered for handling operations of abrasive and high-density slurries. These pumps ...

Flow: 8 m³/h
Pressure: 160 bar

SID SolidPumps is a specialist for piston pumps suitable for the most demanding industrial applications. An undeniable know-how and more than 30 years of experience enable SID SolidPumps to provide ...

Flow: 9,000 l/h
Head: 53 m
Power: 2 ch

Flow: 0.1 l/min - 30 l/min
Pressure: 5 bar

... chromatography. Compact Design With a 50% Reduction in Size (Compared With Previous Models) Reduction in size is achieved so that only about 50% of the installation area is required compared with our conventional-type ...

• Flow rates and prevalence on request • Made of PP or PVDF

Flow: 1.5 l/s - 1,500 l/s
Head: 3 m - 90 m
Power: 0.75 kW - 900 kW

ApplicationsHVAC-system pumping and control; general purpose pumping; industrial/process pumping and control (water or glycol based) DescriptionPipe-mounted UL 778 pumping unit with integrated intelligent ...

Pressure: 150 bar

The Lubrication Pump AXSP-S with pressure ratio from 25:1 is ideal applicable as feeding pump for ABNOX metering valves or as filling system. ABNOX Air-operated Grease Pump from type ...

Flow: 85 l/min
Pressure: 0 bar - 2.4 bar
Power: 480 W - 768 W

Features 12V DC or 24V DC electric pumps consisting of a solid and robust permanent magnet motor which can ensure high reliability even when used at low temperatures. Self-priming vane pump consisting ...

Flow: 30 m³/h - 100 m³/h

DESCRIPTION Advanced OHV, reliable performance, easy start Forged light and strong aluminium alloy Forged iron volute impeller High quality ceramic plunger, silicon carbide water seal Low oil consumption, low noise Suitable for ...

... peripheral granulated impurity. This device is made up of brass and is designed with a self-priming electric pump design. The self-priming electric pump design helps the device to lift water uo to 9 meters ...

Flow: 0 l/h - 300 l/h
Pressure: 0 bar - 18 bar

The NUERT Mini Rotary Vane Pump are compact pumps. This device has a body made up of brass and stainless steel. The available gaskets and mechanical seals are NBR (standard ...

Lobe Pumps The volumetric roots pumps Bora – BA series are equipped with three lobe rotors having a singular geometrical shape that emphasizes the positive aspects of this design and annulling the negative ...

... Powder coating pump which can be used for a wide range of application. The whole set comprises of different variation of pumps. This may include a wagner powder pumps, a gema powder injectors, ...

Flow: 1,000 l/min
Pressure: 17, 10 bar
Fluid temperature: -15 °C - 72 °C

... unparalleled performance in the segment of fire pumps developed through research and development studies, where competition is at the highest level with its modern lines. Product Features Low pressure pump Compatible ...