Industrial test benches

... emergency stop button, eliminating lengthy training typical of similar test stands. With four modes of operation (manual, jog, single cycle, continuous) various single tests or repetitive tests ...

... and a Tensile Frame adapter kit which enables extended clearance for tensile tests. NIDEC-SHIMPO offers a variety of grips and fixtures to create the required set-up for your test parameters. The FGS-250W’s ...

... manual test stand offer the ability to obtain accurate, consistent results without the high cost of a motorized system. Our hand-lever operated test stands are ideal for rapid testing ...

... independent tests on up to five (5) separate specimens using a single load frame. Based on our standard 68TM-30 testing frame (30 kN capacity)*, this system is especially suitable when test times are ...

... allows rapid removal prior to initiation of the test Effective Automatic Cutter Get accurate results when performing method A tests with our motorized cutter. Cutting time repeatability is within ...

... furniture,ceramic present The usage Simulation Transportation Vibration Testing machine which simulates a transporation environment, is applicable to the vibration test of toys, electronics, furnitures, ...

Vertical Motorized Test Stand EMX series is advanced type in capacity up to 1000N. This most rugged model is suitable for a variety of complex testing with its wide speed range, and digital setting ...

Small Type Manual Test Stand FCA-50N Manual Test Stand FCA series is small type with 50N capacity. It realizes high repeatability by the fixed distance at budget ...

Portable Type Manual Test Stand MS series Manual test stand MS series is portable type with 50N capacity. Its knob operation allows fine adjustment of a force gauge’s ...

The model TesT 105 is a very robust electromotive operated load frame that offers all well-proven qualities of TesT load frames at a remunerative price. By means of a digital potentiometer, reproducible ...

... needed to accurately and efficiently test miniature motors and micro motors is included with the purchase of a Magtrol Micro Dyne. The only component that needs to be supplied by the customer is a laptop or desktop ...

... Eddy-Current induced on an aluminum disc directly mounted on the DUT (Device Under Test) shaft. Torque is measured frictionless by a Reaction Torque Sensor mounted under the test bench ...

... With the ability to bring the motor under test (MUT) to synchronous RPM before beginning a test, repeatability is improved. Since the motor windings are at ambient temperature before starting a ramp ...

... equipment. Our expertise in static stress test bench systems is widely acknowledged, as several benches are used all around the world, by major industrial actors in the aerospace and ...

... operating points. Our in-house test and analysis software thus ensures that the values of both the electrical characteristics and the mechanical components are always within the permissible range. An additional Q test ...

... to compensate for the test leads. According to the latest state of the art, the fully automated turntable test stand developed with our external measurement technology system partner ...

... -the-art pressure pulsation test stands with media flow control and pressures up to 12 bar. The pressure pulsation rig is a flexible system and can be adapted to customers’ testing requirements. It covers tests ...

... tank system) additional burst pressure test: up to 500 bar additional leak test: up to 100 bar (long-term test) Frequency: 0.5 to 2.5 Hz (up to 10 Hz) Media temperature: RT up to ...

... Pulsation Test Stands up to 6,000 bar with Dual Chamber System including Burst Testing Pressure Cycle Test Bench | Impulse Test Stand | Automotive Testing ...

The motorized TCM Series force testers feature a small footprint while retaining ample clearance for large samples. With an ideal 100 mm (3.9 in) throat clearance, testing of large samples is no longer a limitation. The universal adapter ...

The compact ES05 test stand is designed for compression testing of up to 30 lbF (150 N). Typical applications include switch contact activation testing, small spring testing, peel testing, ...

The ES10 and ES20 manual test stands are compact and economical solutions for compression and tensile testing of small samples. Choose between a lever (ES10) for quick-action testing or a hand wheel (ES20) ...

The ES30 Force Measurement Test Stand is a versatile and economical solution for most compression and tensile testing applications. It can accept a wide variety of sample shapes and sizes and can be configured ...

Voltage or current conditioning allowing the surface treatment of vacuum cells used in circuit breakers

Measurement, standardised routine tests, type tests and specific tests of power transformers and measure transformers

Standard and special R&D measures and controls of performance of DC and AC insulation, frequencies and various format of signals

... classification is obtained after performing the flame persistency test (NF P 92-504). The electrical burner test apparatus is also employed to study the burning behaviour of industrial ...

... inflammation during the main test (electrical burner test according to NF P 92-503 or radiation test in an epiradiator cabinet according to NF P 92-501). In that case, the flame persistency ...

Testing Systems for Servo Motors A Servo Motor is a closed-loop servomechanism that uses position feedback (like encoder) to control its motion and final position. The input to its control is a signal (either analog or digital) representing ...

... Motor Test Bench Dynamometer MOTOMEA ELECTRIC Motorcycle MOTOR Test Bench Dynamometer is designed for the durability test, routine performance test, ...

... designed for the durability test, routine performance test and Road Condition Simulation test of the electric scooter motor and motor controller. The test bench ...

Multi-Coupling System® plans and manufactures test benches for valves with reaction force from 50 TON up/to 3000 TON. Thanks to the use of its own high-pressure technology in the control consoles and to the experience ...

Multi-Coupling System® plans and manufactures test benches for valves with reaction force from 50 TON up/to 3000 TON. Thanks to the use of its own high-pressure technology in the control consoles and to the experience ...

Multi-Coupling System® plans and manufactures test benches for valves with reaction force from 50 TON up/to 3000 TON. Thanks to the use of its own high-pressure technology in the control consoles and to the experience ...

... completely according to the standard design battery related testing, simulation, under the certain condition of the vibration test of battery, the battery or battery pack is fixed on the vibration table, according to ...

The Test Stand Stentor II is ideally designed to provide a good quality performance and functionality. It is built with a fully equipped force measurement unit which has a ready-to-be-used capability. ...

The T-Drive CC testing machines are specially designed to perform tests in tension only. These are ideal instruments for measuring force on plastic samples, cables, terminals, adhesives, ...

... manual force bench with lever is designed for quick checking of cables and cable lugs. The test begins when the operator places the cable in the lower jaw and the terminal in the upper ...

... performance. - Effortless integration: Easily integrate the mMTB into your test environment using Python scripts or professional test software, such as tracetronic ecu-test or Vector ...

The best way to test variety of motors and electronics. The Motor Test Bench is designed to facilitate comprehensive testing and measurement of embedded systems, that generate mechanical ...

The VC25-SRV-FL5 is the new design high volume test bench for pressure relief valves meeting ASME NBIC, API RP 576. With the FL-serie we are moving towards a future model which is truly adapted to the ...

... directional drilling rig test bench is a special device for testing the performance and quality of the directional drilling rig. It usually consists of a rig mounting platform, testing instruments, and ...

... Controls the test process, sets test conditions, and monitors and records test data in real time. 5. Data analysis software: Analyzes and processes the collected test ...

Product introduction: The performance of precision reducers (RV/harmonic/planetary) is comprehensively designed in a modular and integrated manner. The operating part conforms to ergonomic design, and can complete manual/automatic mode ...

... Thuringia) The interference-optical test device for applanation tonometers consists of an automated laser-optical test apparatus with USB interface and evaluation software for PC/laptop. Due to the ...

... windows for easy surveillance – water- proof lighting • Metal structure • Completely closed unit, locked during the test • Automatic test cycle by digital control panel allowing: • Quick filling to ...

... Technical specifications • Maximum pressure: 400 bar • Test cell 1000 x 500 x 150mm • 125L Tank • Pressure plug: 1/2 female • Protective cover with transparent part • During the test, opening ...