Infrared analyzers

... process FT-NIR analyzer platform suitable for hydrocarbon and petrochemical applications. The FTPA200-HP260 Process FT-IR analyzers are designed for real-time, online process monitoring and process control ...

The MBGAS-3000 FT-IR Gas Analyzer is a complete real-time measurement analyzer for multi-gas component analysis designed for combustion processes. This instrument can easily be integrated into a continuous ...

... of analyzer modules. Up to two modules can be combined into one housing. All analyzers use high-performance measurement technology and simplified calibration that doesn't require test gas bottles. ...

Eco-designed, ultra-compact, smart & connected instrument, the MIR 9000e is your next tool to measure combustion exhaust gas from boiler, or gas from different industrial furnaces and process applications. It offers ...

The MIR 9000P belongs to the new generation of ENVEA gas monitors, showcasing eco-design, IoT and on board intelligence. It measures simultaneously 8 gases – NOx, SO2, CO, CO2, CH4, N2O, O2 and residual H2O – and uses ...

One single analyzer for the measurement of up to 50 parameters, to be selected according to the application. MCERTs certified Based on the FTIR technology (Fourier Transform Infrared) for simultaneous ...

... parameters such as oxygenate concentrations or even complex properties like RON and MON within a few seconds from the measured IR spectrum. The measurement procedure itself is easily done, each step is visualized on the ...

The Latest Trend in Oil Condition Monitoring ERASPEC OIL is a portable stand-alone infrared analyzer for high-speed lubricant oil analysis and condition monitoring in full compliance with ASTM, DIN ...

... the CFC-free solvent cyclohexane for the extraction. Your features at a glance: - Measurement based on a non-dispersive IR transmission technology (D8193) - MDL of 0.5 mg/L - No loss of light ends of samples - ...

One cell Water Vapor Transmission Rate Analyzer (WVTR) for films and packages with one horizontal removable test cartridges. Incorporates MOCON's patented modulated infrared sensor which measures water ...

The AQUATRAN 3/40 package testing analyzer can test the Water Vapor Transmission Rate (WVTR) on both films and packages from low to high barriers. It uses the MOCON’s patented long life modulated IR sensor ...

The AMETEK MOCON ProSpect TS-30 in-line transmission NIR analyzer for liquids and slurries, delivers accurate predictions of protein, moisture,fat, solids and other organic constituent concentrations ...

... gas analyzer can be used for measurement of the concentration of automobile emission gas CO ,CO2 ,HC ,O2 and NO (optional). It is based on the pulsable infrared source and single source two beams non-dispersion ...

Gasboard-3000E is an analyzer for control of exhaust gases from gasoline, petrol, alcohol or LPG engines. It is developed based on Micro-flow NDIR technology for the measuring CO, CO2, O2 and NO exhaust ...

NDIR exhaust gas gas bench Introduction: Gasboard-2000 is a NDIR gas bench for measuring exhaust gases from gasoline, petrol, alcohol or LPG engines. It is designed based on dispersive infrared ...

The SupNIR-2300 near infra-red analyzer is a portable instrument that can take to the field to support the raw material acquisition, production inspection, seed screening, new production évaluation in ...

SupNIR-2700 series is infrared analyzing equipment; it uses Holographic digital grating and high sensitivity InGaAs detector (TEC constant temperature cooling). The sample is analysis is based on the diffuse reflection ...

... environmental authority server. The system adopts a multi-gas analyzer to measure the concentration of SOz, and NOx, by UV-DOAS method and concentration of CO and C02, by non-dispersive infrared (NDIR) ...

The OMEGA 5 is the all-in-one FT-IR solution for gas analysis. Your advantages: • Automated, high-precision, and real-time monitoring of gas concentrations • Calibration-free quantification • Compensation of interferents • Temperature ...

The MATRIX II-MG Series includes four high-performance FT-IR gas analyzers within a compact and robust housing. These analyzers are designed for automated, precise, and real-time monitoring of gas concentrations ...

A single device to measure all the critical greenhouse gases. MIRO’s MGA5-GHG analyzers utilize mid-infrared laser absorption spectroscopy with Quantum Cascade Lasers to directly measure the concentrations ...

CEREALYS, le the first real-time analyser of cereals’ technological and nutritional quality. CEREALYS-2 This new “all-in-one” analyser can also be used to measure all the usual grain quality criteria ...

... new RoHS 2.0 directive for electronic components. The HM1000A benchtop analyzer uses an advanced combination of APCI (atmospheric pressure chemical ionization) and infrared spectroscopy to determine ...

... properties. However, infrared spectra of plastics that have been denatured (have deteriorated) due to heat or UV rays differ in shape from standard spectra, and qualifying them can sometimes be difficult. To address ...

The TOC-L series of TOC analyzers adopts the 680°C combustion catalytic oxidation method, which was developed by Shimadzu and is now used worldwide. While providing an ultra wide range of 4 μg/L to 30,000 mg/L, these ...

NDIR CO2 controller Ideal to monitor CO2 in the air The ZFP9, non-dispersive infrared gas analyzer, is suitable for CO2 concentration measurement in the air in greenhouses. Air analysis ...

... gas analyzers The range of Fuji Electric multi-gas extractive analyzers consists of non-dispersive infrared gas analyzers. A maximum of 5 gas components can be measured ...

Portable NDIR analyzer & sample conditioning system - ZSVS / ZSVF Only available for countries outside of EU (no CE mark)! Compact NDIR gas analyzer system ZSVF: The ...

5E-IRSⅡ Infrared Sulfur Analyzer is used to determine the total sulfur content by infrared absorption, which is widely applied in power plants, coal mines, metallurgy, chemical industry ...

... on ultraviolet differential optical absorption spectroscopy (UV-DOAS) technology. Compared with the Luft NDIR and Micro-flow NDIR flue gas analyzer, it can measure ultra-low range (0-50mg/m3) ...

... US11079322 Features • PCT approved product based on micro-flow NDIR technology to measure low concentration gases. (US Authorization No.: US11079322). • Adopting Micro-Flow NDIR gas sensor technology, ...

Introduction Gasboard-5020 emission gas analyzer is designed for measuring the emissions of all gasoline, LPG or CNG vehicles, it is developed based on the dual beam non-dispersion infrared (NDIR) principle ...

Type designation: CARBONOXY95 Gas: Carbon dioxide/Oxygen Measurement Range: 0-10%CO2/0-95%O2, 0-15%CO2/0-95%O2, 0-30%CO2/0-95%O2 Sensor Only: No Sensor Incl. Electronic: Yes Output: RS232, 0/4-20mA, 0-10VDC Diffusion / Flow: No / Yes Remarks: NDIR/Zirconia

... 30%/0-50% Sensor Only: No Sensor Incl. Electronic: Yes Output: RS232, 0/4-20mA, 0-10VDC Diffusion / Flow: No / Yes Remarks: NDIR

Many questions about foam, one universal approach: The DFA100 Dynamic Foam Analyzer measures the foamability of liquids and the stability of quickly decaying or long lasting foam based on reproducible foaming and height ...

The STA 449 F1 Jupiter® combines unlimited configuration flexibility and unmatched performance in just one instrument. Thermal stability, decomposition behavior, composition, phase transitions, melting processes to be analyzed comprehensively ...

…by means of the TG 209 F1 Nevio ‒ the top-quality thermobalance for research and development. It serves for investigating: ■ Mass changes ■ Décomposition behavior ■ Pvrolvsis ■ Water content ■ Identification of solvents (even ...

The simultaneous thermal analyzer NETZSCH STA 449 F3 Jupiter® allows the measurement of mass changes and thermal effects between -150°C and 2400°C. The high flexibility caused by the various sensors, the great variety ...

Advanced digital CEMS analysis from the 4900 Multigas The 4900 Multigas is a high-performance CEMS analyzer designed for a wide range of multi-gas measurements. A complete monitoring solution for CEMS gas analysis ...

The MultiExact 4100 is a highly adaptable multi-gas analyzer The MultiExact 4100 is a high-performance multi-gas analyzer designed to provide up to four simultaneous gas stream measurements including: ...

... intrinsically safe Micro i.s. 5100 portable oxygen analyzer Designed for the measurement of oxygen (O2) in potentially flammable gas samples, the intrinsically safe Micro i.s. 5100 is a unique analyzer ...